Question about Panasonic SC-HT940 System

5 Answers

How to unlock my Panasonic SC HT940 to play other DVD regions

I have been told there is a way to key in through my remote control to my DVD Player, that will turn off Region 1, and allow all region DVD's to play on my player. Is this true?

Posted by on

  • MaleFootLovr Jan 19, 2009

    I am waiting on a response from a website, that was suggested to me from one of your team members. It is the ONLY site that shows my Panasonic SC-HT940 DVD Model.
    I am hopeful, they have the unlock instructions needed, to make my Unit "Region Free". I have paid them via Pay Pal, and sent them an email as well. Here is the website that is currently aware of my issue http://www.dvdunlocks4u.co.uk/
    I shall do a follow up with you "if" I get the resolution that works. Thank guys ! ;-)
    p.s.
    The "Chip Remotes" do NOT work on my Panasonic Model. I checked this out all day on the internet. Just and FYI ~

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Code free / Region free:
This dvd player is modified to play all region discs

Region number:
The player plays DVD-Video marked with labels containing the region
number “1” or “ALL”. AUTOMATICALLY

OWNERS MANUAL WEBSITE
http://service.us.panasonic.com/OPERMANPDF/SAHT740.PDF

Posted on Jan 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

1. Remove DVD/CD from your drive.
2. Press the following keys on your remote:
[Setup] [1] [>=10] [6] [4] [3] [8]

3. A new menu option will appear named Other followed by four stars. Use one of the following codes to:
3192 -> Multi-Region Enable
3193 -> Macrovision Disable

Posted on Jan 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Most Panasonics could not be unlocked. It is not a matter of codes/key entries on a remote to trick the firmware, the Panasonic by design is regional specific.

Pls post back result(s). Good luck and Thank you for using FixYa.

Posted on Jan 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

Go Here and it half way down the page.

Posted on Jan 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi

You can buy the unlock codes from the following links :

http://www.alldvdcodes.com/

http://www.dvdunlocks4u.co.uk/

Please revert for any clarifications

Thanks
Rylee

Posted on Jan 19, 2009

1 Suggested Answer

  • 3422 Answers

SOURCE: unlock a panasonic dvd home theater to region 2

Hi,

You can buy the codes from HERE or HERE

Goodluck..

Posted on Mar 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Would like unlock code to play regions 1-6 on my panasonic sc-bt207


Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Regards, Jay__g6

Dec 11, 2010 | Panasonic SC-BT200 Home Theater Systems....

1 Answer

Unlock a panasonic dvd home theater to region 2


Hi,

You can buy the codes from HERE or HERE

Goodluck..

Mar 19, 2008 | Home Theater Systems

1 Answer

I AM LOOKING FOR A REMOTE CODE FOR A PANASONIC


We would be happy to help with that. Here is a list of someof the codes that we have for Panasonic SC-HT940 System: 810, 799, 783, 643, 677, and 678.

Start by pressing and holding the AUX mode button until all mode buttons at the top of theremote light up, then release. Enter the number 2 then one of the codes for your Panasonic SC-HT940 System provided above. Press the pound (#) button, the mode light should flashthree times. Check that the code works by trying several different functions onthe remote to make sure it will properly operate your Panasonic System. Keep in mindthat some codes may not be compatible with your equipment. If this is the case,please try the other codes listed for that device until you find one that iscompatible with your equipment.

We hope this helps you, and thank you for being a valued DISH Network Customer!


Phillip Chang
DISH Network Customer Service Representative

May 24, 2010 | Panasonic SC-HT940 System

1 Answer

PANASONIC SC-BT200 UNLOCK REGION CODE


Google for "Panasonic SC-BT200 Region Free

Also see

"http://www.avforums.com/forums/blu-ray-players/885440-blu-ray-player-multi-region-hex-codes.html"

Some Blu-Ray players will need a hardware mod to be region free.

Feb 05, 2010 | Panasonic SC-BT200 Home Theater Systems....

1 Answer

Region 1 DVDs will not play on my recently purchased panasonic blu ray. is there any input code to allow play


Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Regards, Jay__okp9

Dec 01, 2009 | Panasonic SC-BT200 Home Theater Systems....

1 Answer

How can i change regional code on panasonic sc-bt207


Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Regards, Jay__yhg6

Nov 16, 2009 | Panasonic Home Theater System System

1 Answer

Is this a multi region dvd player disc?


not sure about multi regional player disc - if this is a standalone player then there are remote control hacks you can use as per videohelp.com website and if that does not help and this is another type of dvd player ie PS 2 or otherwise then it depends

Jun 28, 2009 | Panasonic SC-HT940 System

3 Answers

Panasonic home theater SA-HT940


the best thing you do is set the region to ply coz some of the dvd player need to set the region

Mar 24, 2008 | Panasonic 600W DVD+VCR Home Theater System...

1 Answer

Regionak code


hi there

your regional code hack can be found here. search here.

http://www.videohelp.com/dvdhacks

hope this helps

Feb 07, 2008 | Panasonic SC-HT940 System

Not finding what you are looking for?
Panasonic SC-HT940 System Logo

Related Topics:

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Home Theater Systems Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you a Panasonic Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...