Question about Projection Televisions

Open Question

TV MS1551F 15"lcd tv with dvd and freeview...can't get freeview channels?

Posted by on

6 Suggested Answers

billyjones69
  • 42 Answers

SOURCE: TELEVISION

This user manual should help!
http://portablemedia.manualsonline.com/manuals/mfg/wharfedale_international/l15t11wa_l15t11wc_l19t11wa_l19t11wc_l20t11wa_l20t11wc_l19t12wa_l19t12wc_l20t12wa_l20t12wc_l22t11wa_l22t11wc.html

Posted on Jan 14, 2008

SOURCE: we have a sharp lcd

no problem occur on your set but the only problem is you can not lock the fine tuning (in manual procedure) but is it better to set the program to AUTOSCAN OR AUTO PROGRAM and authomatically tune and save to the memory all the program channel

Posted on Apr 29, 2008

  • 1 Answer

SOURCE: I have a Tevion 19"

I still haven't found the code, but I managed to find a telephone number for a warranty centre that is able to replace the original remote control.

Posted on Jun 19, 2008

centralhigh
  • 260 Answers

SOURCE: Avtex 15 in tv/dvd freeview

usually $60.00 to $150 depending on the problem. You can find a local tecnician by using our online repair service search engine.
thanks,

Posted on Jun 28, 2008

  • 476 Answers

SOURCE: After attaching a freeview box

How have you got freeveiw connected to your set and what input are you using?
when connecting the freeveiw unit to the tv did you have the power connected and turned on to either tv or freeveiw?
how many sets are connected to the freeveiw unit,
All these things can affect this equation,

it sounds like the set had a power surge from the plugging in of the freeview,
the f connection output from the freeveiw set has a live voltage feed that powers either the mast head amp or the balun in the center of the dish,
for these to work correctly the cable between the freeveiw and the aerial/dish needs power,
this annoying little fault can only be remedied by taking it to the repair man,

Let us know the outcome thanks ,
hope this helps,

Posted on Jul 19, 2008

  • 1 Answer

SOURCE: I have an Onn 15''

The LCD should have a Source button.This will select the AV input.Using the right arrow instead of "OK" button should help select your input.

Posted on Mar 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me how to tune in a channel when ppreparing to use a freeview box on a onyx sw 1536 ld


Unless you've got an "expensive" Freeview box that modulates its output on to the RF (Aerial) connector then you can't. Most Freeview boxes have 2 aerial connectors - 1 IN from the Aerial itself and 1 OUT to connect to the TV - BUT this is ONLY a PASS-THROUGH connection. This means that the digital Freeview signal which is decoded from the aerial signals is NOT output on the OUT connector and sent down the co-axial cable to your TV. Only the "old" ANALOGUE (not Freeview NON DIGITAL) comes down that co-ax. What you should do is connect the Freeview box to your TV with a SCART cable via the SCART connectors on both. You need to select the AV input on the TV using the remote.
Even if you do have an "expensive" box that does modulate the digital decoded programmes and output these of the RF OUT connector, you should still use a SCART cable as the picture produced will be far better
Hope this helps

Jul 06, 2010 | Projection Televisions

1 Answer

Im trying to tune in my old super nintendo my lcd tv that has built in freeveiw but i cant find the channel!


Has your freeview tv got a built in RF i.e (not a digital freeview) tuner? If it hasnt then you wont be able to tune it into your LCD TV by connecting it through your aerial socket. However I think you can get a cable so that you can plug the nintendo directly into a scart or rgb input. Something like this.

http://www.consoleplus.co.uk/product_info.php?pName=av-cable-for-gamecuben64-and-snes&osCsid=0d6106987e4b7a95fc32bf0d45a3b6d1

Then you can just switch to your scart or rgb source on your telly and play on your snes.

Rob

Nov 27, 2008 | Projection Televisions

2 Answers

I have an Onn 15'' LCD TV Model No OLCD1504 and am trying to connect a DVD player that only has an AV out.I have tried connecting it with a Scart to Av lead in all combinations i.e. via freeview box,direct...


Some dvd players do not have the switching line fro your tv to automatically select scart input but you will be able to select via the tv remote if there are no buttons marked av it can be an oblong with an arrow pointing inwards or you may have to select via the source menu on the tv if you have your original handbook it will give a helpline number for Asda.SUPER8.

Jul 31, 2008 | Projection Televisions

2 Answers

Do not understand how to set up my alba digi box to my television and recieve basic digital channels help!


Hi.

Ok
1) plug aerial in to the antena in sock on freeview box.
2) plug short aerial type lead in to rf out socket on freeview & antena in socket on TV.
3) plug A scart lead in to the socket marked TV on freeview box & the other end of scart in to one of the scart sockets on the TV.
If your TV has more than one socket plug it into the one marked AV1 or AV2.

4) plug in freeview to mains electricity & switch box on.
5) Turn TV on freeview should appear automatically if it doesnt look on your TV remote for A button marked AV or a button with either A circle or square with an arrow going through it you may need to press this several times until you see digi picture come up.
Thats basically it but do check that you dont need a new aerial etc to be able to get digi signal in your area.

http://dysonmanuals.llc.nu/

Jul 26, 2008 | Projection Televisions

1 Answer

After attaching a freeview box to my Acoustic Solutions LCD32NK750HD 32" inch LCD HD TV the picture started to scramble and **** about the screen, this would stop when I turn the TV off and back on...


How have you got freeveiw connected to your set and what input are you using?
when connecting the freeveiw unit to the tv did you have the power connected and turned on to either tv or freeveiw?
how many sets are connected to the freeveiw unit,
All these things can affect this equation,

it sounds like the set had a power surge from the plugging in of the freeview,
the f connection output from the freeveiw set has a live voltage feed that powers either the mast head amp or the balun in the center of the dish,
for these to work correctly the cable between the freeveiw and the aerial/dish needs power,
this annoying little fault can only be remedied by taking it to the repair man,

Let us know the outcome thanks ,
hope this helps,

Jul 19, 2008 | Projection Televisions

1 Answer

HAVE AN AERIAL CNNECTED TO MY TV BUT WHEN I DO A TUNE IT SAYS THERE IS NOT SIGNAL? ANY IDEAS. IT IS A WHARFEDALE WITH BUILT IN FREEVIEW


If you know your aerial is ok check if you can receive any analogue channels if not, is the tv going in to search but not finding anything. If it is a LCD tv I have had problems with the prescaler chip but be aware there are two versions of chassis with different prescaler boards.

Jun 02, 2008 | Projection Televisions

1 Answer

We have a sharp lcd tv c/w built freeview,the last couple of weeks it keeps losing just 1 channel ie bbc1 or itv1 every other channel is fine if we retune the tv everything goes back to normal, is it the...


no problem occur on your set but the only problem is you can not lock the fine tuning (in manual procedure) but is it better to set the program to AUTOSCAN OR AUTO PROGRAM and authomatically tune and save to the memory all the program channel

Apr 29, 2008 | Projection Televisions

2 Answers

TELEVISION


This user manual should help!
http://portablemedia.manualsonline.com/manuals/mfg/wharfedale_international/l15t11wa_l15t11wc_l19t11wa_l19t11wc_l20t11wa_l20t11wc_l19t12wa_l19t12wc_l20t12wa_l20t12wc_l22t11wa_l22t11wc.html

Jan 13, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...