Question about Intertherm P3RA-048K Air Conditioner

1 Answer

Intertherm furnace not getting hot after motor swap. PLEASE HELP

I have a mobile home that is equiped with an intertherm furnace motor ith a compatible motor from cc dickson in Gaffney, SC because the original was locked up. Now it blows MUCH harder but it won't warm up. I can restrict the air flow and get it somewhat warmer but the furnace runs non stop. It is a 3 speed to where my orginal motor was a one speed but I have it hooked to the red wire for the slowest speed possible. Can anyone help me please as I have 2 small kids that''s having to deal with this also. Thanks so much for the help. Brad

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 144 Answers

You already diagnosed it yourself. The motor may have been the same physical size but it operates at a higher speed and doesn't remove enough heat from the furnace. You need to have the right motor installed period.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A MODEL UFG-101AG-4 SERIAL # 800H2 INTERTHERM FORCED AIR FURNACE FOR MOBILE HOME OR TRAVEL TRAILER THAT I DONT KNOW WHATS WRONG WITH IT?


OK. Let me answer you, even if honestly I don't have any idea about an INTERTHERM FORCED AIR FURNACE. To get any answer, to a problem, you should describe your problem. Just telling that you don't know what's wrong with it is simply no enough information, even for a star expert in your INTERTHERM FORCED AIR FURNACE.

Jun 25, 2015 | Intertherm Heating & Cooling

1 Answer

INTERTHERM NO HEAT OR BLOWER


This could be failure of the igniter and/or thermocouple.

Jan 27, 2014 | Intertherm 56000 Btu Gas Furnace

1 Answer

Vanderhoof BC Canada


http://www.intertherm.net/DealerServiceLocator.aspx

Jan 08, 2014 | Intertherm 56000 Btu Gas Furnace

1 Answer

Intertherm feh 015ha


either the heat strips, fusible links on elements or sequencers.

Sep 21, 2013 | Intertherm E3EB010H Electric Furnac

1 Answer

Have an Intertherm thermostate in mobile home controlling gas hearing and elec ac. Blue wire to thermostat connects to the "A" terminal on the thermostat...Blue wire goes to a terminal on the...


If there are only two wires going to the thermostat? Then you will not be able to use a Digital Programable stat. Intertherm and Coleman furnaces do the switching different than regular furnaces. They use the switching from heat to AC at the furnace with the rocker switch. They use the thermostat to either break the connection or make the connection. They use a heating only thermostat.... Hope this helps

Jan 02, 2011 | Intertherm P3RA-048K Air Conditioner

1 Answer

Replaced blower motor in my Intertherm furnace, now blows cold


most blowers have a high( black wire) and low(red wire) low works much better in the heat mode

Jan 17, 2009 | Berkel 827E Gravity Feed Deli Meat Slicer

1 Answer

Intertherm Furnace Will not stay on


Your furnace is likely getting too hot check your filter. make sure the fan is running. if you have weak air flow you may have a blocked heat transfer coil. you should have your heating and cooling system serviced yearly by a qualified company to inspect and test equipment.

Jan 04, 2009 | Intertherm Heating & Cooling

1 Answer

Smoke coming from furnace


You may have something (paper,dust, etc.) on the electric coils. There may also be a short in the element.

Mar 24, 2008 | Intertherm P3RA-048K Air Conditioner

Not finding what you are looking for?
Intertherm P3RA-048K Air Conditioner Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intertherm Heating & Cooling Experts

Donni Steen

Level 3 Expert

659 Answers

Dennis Boxerman

Level 3 Expert

931 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you an Intertherm Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...