Question about Venturer 3.6" Portable DVD Player

1 Answer

No picture I have sound but all I can see is a white picture. If I tilt the screen all the way back I look at a certain angle, I can see a little of the picture. What can I do?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers
Re: No picture

If it is of recent purchase -take it back. If out of warranty check the manufacturer website for advice This is a fault that is not a repair option.

Posted on Jun 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My coby v-zon dvd player is less than a year old & when I turn it on the picture comes on clean, then becomes distorted to where I cannot view my disc. is there any technique available to fix this...

I had a similar problem with my portable V Zon player. It would sometimes come on with the V Zon blue screen and work fine, then sometimes have no picture but have sound. I knew the DVD drive was working so I removed the back of the screen. The white cover has two small screws in the bottom and then the white cover just pops off (carefully pry it around the edges.) I traced the problem to the plug that supplies power to the screen ( a white plug with about 10 small red wires attached.) the plug itself was weak and I had to remove it from the socket, clean the connections and carefully pry it back into the socket. It is working fine now but I know where the problem lies if it starts acting up again. You may want to add some dielectric grease to the plug and socket, available at electronic supply stores and auto parts stores.

Jan 15, 2010 | Coby TF-DVD7307 Portable DVD Player

1 Answer

The screen is white and i can't see the picture unless I tilt it way back and it still isn't very clear

Ihave the same problem and someone else posted that because it gets folded alot a flat wire may have broke.

Dec 05, 2009 | GPX PD808B Portable DVD Player with Screen

1 Answer

Monitor #2 has sound, no picture

A/V cable is broke. I'm trying to find one also with little luck

Jun 16, 2009 | DVD & Blu-Ray Players

1 Answer

No Sound when playing a video game on Coby Pertable DVD player

Do you have the audio plugs in the proper spot? The red & white audio plugs from the PS 2 need to be plugged into the audio in jacks on the portable dvd player in order to get sound. Should match up red to red; white to white for sound, yellow to yellow for video. Hope this helps.

Feb 03, 2009 | Coby TF-DVD1023 Player

1 Answer

Sound but no picture Magnavox Model MPD850 sound OK but no picture?

I have the same problem. The little white popup button on the upper right of the bottom of the unit when it's open is there to cut off the video if it's closed (i.e. in the event it's plugged into a television). My white button won't pop back up... could be the problem with yours. Wish I had a solution.

Jun 21, 2008 | Philips MPD850 Portable DVD Player

2 Answers

Split screen from DVD player, cable is fine no problem

The progressive scan can work only throug progressive scan CTV.. while some of the newest DVD player today has a progrissive... now you must turn OFF the progressive scanof your DVD on the set-up menu to see the real screen display.

Jan 07, 2008 | DVD & Blu-Ray Players

4 Answers

Craig portable dvd player CTFT701

My screen would flicker when you tilted it back and forth. Sometimes it would cut out and moving it would make it come back on. I took the battery off and opened the screen from the front(2 screws in hinge & 2 screws under rubber plugs). There is a ribbon plug inside. Mine looked kinked in one spot so I just repositioned it so the kink was in another spot. Everything worked fine after that. Hope this helps.

Aug 03, 2007 | Craig 731398407019 Portable DVD Player

1 Answer

Vcr record problems

It sounds like the back tension is off on the unit. the back tension is controled by a small band attached to a copper or metal strip and that ia wraped around the supply reel and is adjust by an arm that swings out and contacts the tape during record or playback and keeps a steady tension on the tape. If the back tension band breaks or wears out you will get a picture that looks like the tracking is off or bad or dirty video heads. Most likly you do not have a backtension gauge and it certainly would not be fesable for you to purchace one as a good one cost about 100 bucks or so. A repair shop may beable to adjust it for you, But even their fee may be cost prohibitive. Good Luck PS please do not forget to rate this.

Oct 14, 2006 | Sanyo DVW-7200 DVD/VCR

1 Answer

White screen no picture but sound

First thing to check is the ribbon cables for chaffing, or the connection seating. This can cause this symptom. As well as a failing LCD video deciphering circuit and/or motherboard problems. not a bad chance that you'll need to replace the screen/unit. any warranty? Good luck

Jun 06, 2006 | Durabrand DUR7 Portable DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Venturer DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Arcadian Duran
Arcadian Duran

Level 2 Expert

284 Answers

john milligan

Level 3 Expert

506 Answers

Are you a Venturer DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides