Question about Digital Camera Accessories

1 Answer


I lost my power supply. Can you please assis me with the specs

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have the adaptor you require....model AD2910-0207 INPUT :- 100-240VAC, 50/60HZ 0.3A OUTPUT:- 5V -2A....AC ADAPTOR hope this helps....hope you can help me i have no software (drivers) for this camera. can you assist. pete

Posted on Dec 27, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Lcd screen of Pentax camera damaged, I am located at Indore, MP

Perhaps you just try to contact Pentax for this? But I think if you could buy a LCD screen, it will cost you more than a brand new camera, with better specs than your Optio M20.
So perhaps you start saving for a new camera?

May 04, 2014 | Pentax Optio M20 7MP Digital Camera with...

1 Answer

Need to replace power source

Different devices take different adapters. Do you have a particular item in mind?

Jan 14, 2013 | Digital Camera Accessories

1 Answer

Battery incompatable

Just because someone claims a battery is compatible does not make it so. Nikon knows the specs of their batteries. Third-parties have to reverse-engineer to work out the specs, and they don't always get everything right.
Stay with Nikon batteries, unless you want to jeopardize your camera just to save a few dollars.

May 14, 2012 | Bower Digital Camera Accessories

1 Answer

Siren digital photo frame manual

Please mention if the fault is related to full failure of the display in which case the power supply or the display section is faulty, failure of the back up inverter circuit cannot be ruled out and in all these cases you need to open the unit to test and confirm.

Nov 30, 2011 | Digital Camera Accessories

1 Answer

There is no more power. We plugged it in another place and still doesn't work.


if it does not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby not making it to power on.

This unit must have a power supply board in it where power enters from the mains. A capacitor, fuse, diode, etc may have been defective on the power board and maybe that's why its not making the unit turn on. There might also be some disconnection or something, inside the unit which is not making it to power on.

To actually find out what's wrong, you need to disassemble the unit with a screw driver and check what's wrong. You will be needing a meter in order to test the components on the power board, once you detect any bad component, you can make necessary replacement at any electronics accessories store withing our vicinity. This is the only way by which you can detect the problem.

Of course, testing the power board with a meter will require someone that has the ability. So it you can't, then you might be needing the help of a repairman or you can call a friend that has the ability to help you out.

I wish you the best of luck.

Jan 12, 2011 | Digital Camera Accessories

1 Answer

Canon CA-590 compact power adapter

have that adapter tested, found defective diode sb260 near dc output, however after replacing different specs of diode it powered up then diode was busted again.

Nov 19, 2008 | Canon CA-590 Compact Power Adapter...

1 Answer

Lost wireless control

i ordered a replacement unit direct from sony

Nov 14, 2008 | Digital Camera Accessories

Not finding what you are looking for?
Digital Camera Accessories Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Camera Accessories Experts


Level 3 Expert

96592 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Are you a Digital Camera Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides