Question about Evga nForce 680i SLI (122CKNF68) Motherboard

1 Answer

Computer not turning on

The computer will briefly "spark" ie fans and lights come on but then turns right back off. will not boot. i have reduced the computer to basic's cleaned it . i am trying to find out what the FF display is on my evga motherboard means and if it is normal or a prob;lem code.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 152 Answers

Open core voltage connection after if that power on
so problem in your motherboard vrm circuit goes off

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After turning on it turns off automatically after 3-4 seconds


When you plug in the power cord is there any lightswhatsoever on the laptop, where the plug goes in or on the AC Adapter of thepower cord?

When you press the power button do you hear fans running, hard drive spinning,lights on the computer, hear any beeps or lights constantly blinking, hear theDvD/CD drive click and the light on the drawer of the DvD/CD turn on for asecond or two? If so the laptop is trying to boot or may have booted, butthe screen is not showing for some reason.

Beep tones and blinking lights tells the technicians what is going on with thelaptop and why it is not booting. Most times it's a motherboard issuewhen you hear beeps or blinking lights continuous. Most times the problemis with the memory or Video Card. Count the Blinking Lights or Beeps and takenote of their pattern (1 Long or 1 Long followed by 2 Short).

Maybe your power cord is bad if you don't get anything to happen whatsoeverwhen you press the power button. And if that's true maybe you wasoperating off the battery the last time you had it on and since the power cordis bad, it was not charging the battery so the battery is drained and the powercord is bad.

Maybe you have a Static Charge Buildup. Remove the Power Cord, Remove theBattery, then Press and Hold the power button for 30seconds. After 30 seconds plug the power cord back in (leave the batteryout) and hit the power button to see if it boots. If it does, you can putthe battery back in and let it charge.Maybe your DC Power Jack which is where the power cord plugsinto the computer is bad. Take an ink pen and push the tip inside thejack and see if the little pin wiggles, if so the jack is bad. You'll have totake the laptop apart to fix it. Most times it is soldered onto themotherboard, so you will have to desolder the old and solder a new one.Maybe your memory is bad or the memory slot is bad.Remove the Power Cord, Open the Case and remove one of thememory chips. Set the chip aside then try rebooting the computer. If it boots, then you know the memory chip you set aside is bad so mark an x onit with an ink pen. If it fails to boot then move the chip to the nextmemory slot and try rebooting. If it fails take the chip out and set itaside, then put the other chip in and try booting it in both slots. If itboots, just to verify that the chip set aside is bad, mark an x on it and putit into the open memory chip slot and try booting.

Jun 07, 2012 | Computers & Internet

2 Answers

My computer does not turn on right away, except fans.


It could be a failing power supply, but here's a good article to help you diagnose the issue. A local computer technician will be able to load test your power supply if you take it in to them and let you know quickly if that is indeed the problem, in which case it's fairly inexpensive to remedy.
Otherwise I would guess a boot issue of some kind.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!



May 23, 2009 | QDI Group QDI Advance 9 Motherboard

1 Answer

Monitor /keyboard will not come on when computer boots, monitor light never turns green and no leds lit on keyboard,know both items r working tried on different computer and both work.Also processor fan is...


did u check the ram? please pick out RAM and placed in next slot. i will happen due to failure in RAM. is there any beep tone? ok
check your RAM.
i hope that is the problems of RAM

May 04, 2009 | Computers & Internet

2 Answers

Computer turns itself off


try installing a chassis fan to reduce heat inside your case, as the other guy said, dust is a big possibility, the problem does not appear to be CPU but I would check to see that the spu fan is running normally.

Another thing could be that it is time for a more potential power supply.

Mar 23, 2009 | Gigabyte Computers & Internet

1 Answer

Computer will not turn on. it is just "sparking" ie fans/lights/come on for split second and then everything goes off. on my evga motherboard there is a FF display. i have been troubleshooting easy things...


Not sure about the FF. If everything comes on and then powers off after only a split second, there is not time for the display to show anything. I'm suspecting it is indicating there is no signal.
The very first thing I would try on this computer is the power supply (assuming it's a desktop system).
A faulty power supply can act like this.

Jan 17, 2009 | Evga nForce 680i SLI (122CKNF68)...

1 Answer

Motherboard NO Boot


have you made sure that the new hard drive is set to the same settings that the old one was ie master or slave and that the ribbon is attached the same way

Aug 21, 2008 | ASUS P4S800-MX Motherboard

1 Answer

Motherboard message LED message is --


Your motherboard has died .
No beep code explains it all .
LED lights and even fans spins only tells me that your getting power to the motherboard , but No beep code is crucial .
Every motherboard will beep once when your first turn on and beep once again before the Opertional System boots up .
Sorry again for your loss ...

Aug 07, 2008 | Evga nForce 680i SLI (122CKNF68)...

2 Answers

Problem booting up


This is a well-documented issue on GX280 Optiplex machines for which there is no permanent fix - at least there is not one I came up with or found elsewhere. The symptom is that after power on, the CPU fan spins faster and faster until it tops out at rather impressive RPMs. Swapping power supplies, memory sticks, CPU, the heatsink and fan assembly, or adding more heatsink grease does not make any difference. There are no beeps, no video, nothing. The problem is related to a CPU temperature sensor, and some machines may display a message on the screen stating so.
Through various trial and errors I was able to make almost any motherboard with this symptom boot up. A rather significant downward pressure applied on the top of the fan vent will make a system boot up and run for days, but the pressure has to remain in place or the system will freeze instantly. This pressure has to be applied not on the top of the entire fan assembly but just on the vent side, in a way that the heatsink will not make good contact with the CPU on the side opposite of vent. What I do is I place a 1/2" tall object at the top of the fan casing right at the tip of the vent and force the case closed. The PC will boot and work as long as the case is closed and the pressure is there.
I have no idea what the pressure on top of the heat sink vent really does. I suspected that maybe the CPU contact pins become elastic and deform over time. I tried carefully and tediously bending all of those pins up a bit to create a better contact point, but that did not work. I also removed and measured capacitors near the voltage regulators for capacitance, and all typically measure near their advertised values. I haven't seen a motherboard with popped caps and this racing fan issue concurrently, but this doesn't mean the symptoms are mutually exclusive; it's probably just a coincidence.
I'll keep looking and trying to find a fix for this issue. We have a small pile of motherboards with this identical issue at my workplace, and when/if I find a solution I'll be sure to write about it.
Good luck!

Feb 06, 2008 | Computers & Internet

Not finding what you are looking for?
Evga nForce 680i SLI (122CKNF68) Motherboard Logo

Related Topics:

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evga Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

69857 Answers

Mike

Level 3 Expert

4332 Answers

Are you an Evga Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...