I used my mp3 player after charging it properly then 25 hours later, it did not turn on. I went to the computer and the first time the computer recognize the device but later the computer said that she can not recognize the device. Now what can I do?.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert whose answer got voted for 20 times.
Re: my rca m4204 can not turn on
Go to control panel then add hardware connect your hardware device and click "yes i have connected the hardware" After that scroll down and select install new hardware device select install hardware that i manually select from a list scroll down to windows portable devices and choose MTP device
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The most common cause is a flat battery. There is a trick to charging
the battery in these small mp3 players. It wont charge if it is turned
on, and it won't charges if it's turned off. Here what to do... 1. plug the payer into your USB port. or wall charger 2. switch thje palyer on using the mechanical switch (on the side) 3. turn it off by either holding down the play button, or selecting
"System" from the menu 4. The screen will go black and the battery will begin charging.
One plug it to the usb device of your computer Hold down power button for 10 seconds. Go to the RCA website and download the latest firmware. Install the firmware and windows will find the player. Keep it into the usb till its fully charged.
On the back of the the mp3 player is a reset switch. Hold that down about 15 seconds. If that does not work go to the RCA website. Download the latest firmware. Plug mp3 player into pc. Install the new firmware. Keep it plug to computer for about 1 hour to charge the battery alittle.
On the back of the the mp3 player is a reset switch. Hold that down about 15 seconds. If that does not work go to the RCA website. Download the latest firmware. Plug mp3 player into pc. Install the new firmware. Keep it plug to computer for about 1 hour to charge the battery a little.
plug it to usb device of your computer that will charge the battery Keep it pluged in and goto the RCA website and download the firmware. After you download the firmware. Go to the spot that it downloaded to and click the updated firmware. (do not remove the mp3 player from the usb device of your computer) After the new firmware is installed it will work like new.
ok lamar230990 to turn your mp3 player to msc mode disconnect it from the computer and turn it on. once it is on go to settings and scroll down to protocol and click on it with the play/pause button. this should turn it to msc mode then connect back in to the computer and go to this site to download the software www.rcaaudiovideo.com