Question about Pinnacle Dazzle DVD Recorder

1 Answer

If I choose to make chapters, then the new DVD never finishes. It says editing chapters for hours and hours. If I choose the option of NOT creating chapters the DVD burns fine.

Posted by on

  • 1 more comment 
  • vicbic01 Jan 18, 2009

    The only software is the the installation disk that came with the Dazzle DVD Recorder.
    The DVD is set to the 103 minute recording time. (The blank is just a 4.7 GB. 120 minute version)
    The type of blank DVD is a 120 min. 4.7 GB SONY DVD+R.
    The burner is an ATAPI DVD A DH20A4P and I'm sure it's 8X speed.


  • Anonymous Feb 16, 2009

    putting chapters on videos never finish

  • Zeniff Hathaway May 11, 2010

    what software? how long is the dvd? dvd type? dvd burner type/speed?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Check the dazzle website and download the firmware. should fix your problem.

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make vaio recovery disc for


Follow these steps to create your recovery discs.

From within the VAIO
Recovery Center application, under Choose a program, click Create Recovery Discs.

NOTE: The VAIO Recovery Center can be accessed from within Windows Help and Support. Click Backup & Recovery, then click Launch VAIO Recovery Center.

Next to Create Recovery Discs window, click the Start button.

In the When recovery discs are needed window, click the Next button.

In the Choose your media window, click the Next button.

NOTE: Although an option is provided for creating Dual Layer (DL) discs, that option will not produce usable discs on this model. Ensure the Create recovery disc(s) using... DVD(s) option remains selected before clicking Next.

Insert a blank, recordable DVD into the DVD drive.
In the Insert a blank disc window, click the OK button.

Insert a new disc when necessary as instructed.
When all the disks have been created, click the Finish button.

NOTE: After the recovery discs have been created the first time, any disc can be created again by selecting the disc from the list and clicking Next.

Feb 05, 2012 | Sony VAIO VGN-N325E Notebook

Tip

How to rip dvd to ipod or iphone?


v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 7.8 磅 0 2 false false false MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:普通表格; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} As we know, iPhone and iPhone 3GS only support H.264, MPEG-4 in .mp4, .mov, .m4v formats, and MP3, protected AAC, AAC, Audible, Apple lossless in .aac, .mp3, .m4a files. That's to say, you need to rip DVD to iPhone Mac the format supported by iPhone.dvd to ipod
Step1. Add DVD Movie. Launch Mac DVD Ripper, Click the Load DVD Or the Load IFO button, browse your computer, find the DVD folder of the movie you want to add from your hard disc or DVD-ROM, open your DVD folder, select the VIDEO_TS folder and click OK.

After you add your DVD movie, you can choose any titles or chapters you want to rip dvd to iphone on Mac by ticking the check boxes before them.

clip_image001.jpg
Step 2: DVD to iPhone on Mac Output Settings At the bottom of the main window, you can name the output file for the current title/chapter, and select a subtitle to put on your movie, select an audio track. Then finish all the settings including selecting an output format for the current title/chapter from the format drop-down list:
clip_image002.jpg
clicking the Settings button to set the video and audio encoding settings such as video resolution, video bit rate and audio sapmle rate and so on, choose if to merge the selected titles or chapters into one file, and set an output directory to save the output files.
Step 3: Start to rip DVD to iPhone Mac After setting the output settings, you can just click the Start button to start to rip DVD to iPhone on mac. You can choose to shut down your computer or open the output folder after conversion so you don't have to sit before your computer waiting for the conversion to finish.
I am a computer worker and can help you solve many problems, such as:dvd to ipod,mac dvd ripper,mac video converter ect.

on May 19, 2010 | Computers & Internet

Tip

ISkysoft DVD to iPod Converter for Mac Guide


iSkysoft DVD to iPod Converter for Mac is a specially designed tool for Mac OS X users to easily convert DVD movies for playback on iPod. The steps below will guide you on how to use this software:mac dvd converter

Step1. Please download iSkysoft DVD to iPod Converter for Mac; you can know more about it by visiting here. Then install the software and run the software.

Step2. Add DVD Movie
Click the Load DVD button, browse your computer, find the DVD folder of the movie you want to add from your hard disc or DVD-ROM, open your DVD folder, select the VIDEO_TS folder and click OK.

Or, click the Load IFO button, browse your computer, find the DVD folder of the movie you want to add from your hard disc or DVD-ROM, open your DVD folder, open the VIDEO_TS folder, select all the IFO files and click OK.

mac-dvd-ipod-guide-1.jpg

After you add your movie, you can choose any titles or chapters that you want to convert by ticking the check boxes before them.

mac-dvd-ipod-guide-2.jpg

Step3. Output Settings
At the bottom of the main window, you can name the output file for the current title/chapter, and select a subtitle to put on your movie, select an audio track. Then finish all the settings including selecting an output format, clicking the Settings button to set the video and audio encoding settings, choose if to merge the selected titles or chapters into one file, and set an output directory to save the output files.

mac-dvd-ipod-guide-3.jpg
Step4. Start Conversion
After setting the output settings, you can just click the Convert button to start converting your Movie. You can choose to shut down your computer or open the output folder after conversion so you don't have to sit before your computer waiting for the conversion to finish.

mac-dvd-ipod-guide-4.jpg

Advanced Options If you want to edit your movie before converting it, iSkysoft DVD Ripper for Mac provides your with various powerful functions including:

1. Trim DVD Title or Chapter If you want to capture a clip from the current title/chapter, you can click the Trim button to open the Trim window and trim the current title or chapter by dragging the Start Time slider to set the start time, and dragging the End Time slider to set the finish time.

mac-dvd-ipod-guide-5.jpg

2. Crop DVD Video If you want to remove the black edges or just convert an area from your movie video, you can click the Crop button to crop the video of the current title or chapter. You can specify an area either by dragging the frame around the video or setting the crop values: Top, Button, Left and Right. Above the crop pane, you can select an output aspect ratio and the available options are: Keep Original, full screen, 16:9 and 4:3. You can preview the video in the select aspect ratio on the main interface and during the conversion process.

mac-dvd-ipod-guide-6.jpg

Above the crop pane, you can select an output aspect ratio and the available options are: Keep Original, full screen, 16:9 and 4:3. You can preview the video in the select aspect ratio on the main interface during the conversion process.

3. Video Effect If you want to adjust the video effect of your movie, you can click the Effect button and drag each effect adjustment slider to set the video brightness, contrast, saturation and video volume. You can also choose a special effect from the Effect drop-down list to apply to your movie.

mac-dvd-ipod-guide-7.jpg

on Apr 27, 2010 | Computers & Internet

1 Answer

HOW TO MACK recovery disc for vaio vgn-n325e


Follow these directions:
From within the VAIO
Recovery Center application, under Choose a program, click Create Recovery Discs.

NOTE: The VAIO Recovery Center can be accessed from within Windows Help and Support. Click Backup & Recovery, then click Launch VAIO Recovery Center.

Next to Create Recovery Discs window, click the Start button.

In the When recovery discs are needed window, click the Next button.

In the Choose your media window, click the Next button.

NOTE: Although an option is provided for creating Dual Layer (DL) discs, that option will not produce usable discs on this model. Ensure the Create recovery disc(s) using... DVD(s) option remains selected before clicking Next.

Insert a blank, recordable DVD into the DVD drive.
In the Insert a blank disc window, click the OK button.

Insert a new disc when necessary as instructed.
When all the disks have been created, click the Finish button.

NOTE: After the recovery discs have been created the first time, any disc can be created again by selecting the disc from the list and clicking Next.

Feb 05, 2012 | Sony VAIO VGN-N325E Notebook

1 Answer

I had lost my third recovery disc in vaio vgn-cs280j what i have to do?


You can create the Recovery Discs for the Computer.

  1. Ensure all open programs are closed.
  2. Ensure all network connections are disconnected.
  3. Ensure all peripheral devices are disconnected. NOTE: If the computer uses an external CD/DVD drive, ensure the drive is plugged in according to the instructions in the VAIO User Guide.
  4. From within the VAIO Recovery Center application, under Choose a program , click Create Recovery Discs . NOTE: The VAIO Recovery Center can be accessed from within Windows Help and Support . Click Troubleshoot my VAIO [FIG. 1], and then click Launch VAIO Recovery Center .
  5. In the Create Recovery Discs window, click the Start button.
  6. In the When recovery discs are needed window, click the Next button.
  7. In the Choose your media window, click the Next button. NOTE: Although an option is provided for creating Dual Layer (DL) discs, that option will not produce usable discs on this model. Ensure the Create recovery disc(s) using... DVD(s) option remains selected before clicking Next .
  8. Insert a blank, recordable DVD into the DVD drive.
  9. In the Insert a blank disc window, click the OK button.
  10. Insert a new disc when necessary as instructed.
  11. When all the disks have been created, click the Finish button.


You can call Direct Accessories and Parts Center at: 1-800-488-SONY (7669) to order Recovery Discs also.

May 14, 2010 | Sony VAIO VGN-CS260J/P Laptop

Tip

Burning DVD using AVS Video Converter


Introduction
AVS Video Converter helps burning DVD to playback in your home DVD player from all modern video formats. The integrated DVD burning engine and the widest range of supported video formats make AVS Video Converter a perfect tool to create personal DVD videos. Just follow these few steps listed below.
Step 1: Download and install AVS Video Converter

Click here to download it. After the download is finished, run the AVSVideoConverter.exe file and follow the installation wizard instructions.

Step 2: Run AVS Video Converter and select your input video file
To select a video you would like to convert hit the Browse... button next to the Input File Name field. In the opened Windows Explorer window browse for the necessary video file:

video-converter-1.png

Note: when your input is a DVD disc, you will need to select the path to your source file: X:\Video_TS\Video_TS.IFO. "X" stands for your DVD-ROM or the hard disk drive folder where your DVD is stored. Please see the online help section to find more on burning DVDs to other video formats.

Step 3: Set up the conversion parameters
Click the To DVD button on the main panel. In the list of video disc types (Profile) select one of the preset profiles.

burning-dvd-1.png
You can edit the files for burning dvd. By clicking the (+/-) buttons you can add or remove files from the list. Using the Arrows you can change the sequence of files.

Step 4: Set up a proper video output file path
Click the Browse... button next to the Output File Name field and select a location on your HDD for the output video file.
Note: when you select a location for your output video file, you should save the file to your personal computer HDD.

Step 5: Create a menu for burning DVD
In case you convert your files into a DVD format, the program will let you create a DVD menu so that you could navigate through your disc easily using it. First of all you need to put the markers indicating the beginning of the chapters of your DVD menu. To do it switch into the editing mode using the Edit button on the AVS Video Converter main panel. The following window will be opened:

burning-dvd-2.png

To add markers place the mouse cursor within the Timeline where a chapter should start and click the Add button located at the Markers Panel.
If you want to delete some markers select the necessary one clicking it with the mouse. Then use the Remove button from the Markers Panel or right click this marker and select Remove from the express menu. To delete all markers use the Clear All button.
After all the markers are added click the Ok button to save the changes you have made and close the Edit Input File(s) window. After that you can start editing your DVD Menu.
Click the Menu button on the AVS Video Converter main panel.

burning-dvd-3.png

Switch to the main menu or a chapter tab and select one of the style presets for your menu or assign your own picture by clicking the Change Background button.

burning-dvd-4.png
You can move the marker by dragging it along the Timeline, add a new one or delete them using the appropriate button.
After you add all the chapters and when you are satisfied with the result, close the Menu Editor window and start converting your video.

Step 6: Convert your DVD files
After you have set up all the conversion parameters, hit the Convert Now! button to start conversion.

burning-dvd-5.png
When process is over the following window will appear, where you should click Burn to Disc...: for burning dvd

burning-dvd-6.png
Step 7: Burning DVD onto a disc
Insert a blank DVD into your computer optical disc drive. Make sure that the disc is compatible with your drive.

You can select the necessary disc drive if you have several, refresh it and mark the Verify disc check-box to make sure the disc is recorded correctly.

burning-dvd-7.png
Now click the Start burning! button to begin the recording. Note, that if the disc is not empty you will be offered to erase it. If you do not want to do that, you can eject the disc and use another one instead.
After the burning dvd is over the disc will be ejected automatically. Note, if you checked the Verify disc, the recording will take a little longer depending on the size of the output files as the program will need time to verify them.
Now you can watch your recorded home video DVD on your Home DVD Player!

How to create an Audio CD using CD Burner dvd? helps you to creat an Audio CD.

on Feb 07, 2010 | Computers & Internet

1 Answer

Gprs, mms and inet seetings for se c510


GPRS Settings:
1. Go to Menu>Choose Settings. Press Left Navigation Key to go to Connectivity. Scroll Down and click Internet Settings
2. Choose Connect Using: and Add Data accounts. Enter the following parameters
Account type: PS data
Name: MyGlobe CONNECT
APN: www.globe.com.ph
3. Save Account
4. Choose Options Menu by clicking the left soft key.
5. Choose Edit. Leave all the settings as default except Proxy Settings.
6. Go to Proxy Settings and Edit.
Proxy: On
Same for all servers: Off
Proxy servers: Multiple
7. Click Edit on Proxy servers. Choose HTTP.
Username: Blank
Password: Blank
Proxy address: 203.177.42.214
Port: 8080
8. Press Back four times
9. Press Select to choose myGlobe CONNECT as default account.
10. Press Save.
11. Go to Main Menu> Internet>Options>Advance. Press Left Navigation Key to go to Connectivity.
Connect using: MyGlobe CONNECT
Default Homepage
Name: MyGlobe WAP
Address: http://www.globe.com.ph/globe.asp
12. Press Save

********

MMS:
1. Go to Menu>Messaging>Settings>Picture message
2. Go to MMS profile
3. Create New Profile.
MMS profile name: MyGlobe MMS
Message server: http://192.40.100.22:10021/mmsc
4. Choose Connect using: and Edit.
5. Choose Options Menu by clicking the left soft key.
6. Create New and enter the following parameters
Account type: PS data
Name: MyGlobe MMS
APN: mms.globe.com.ph
7. Save Account
8. Choose Options Menu by clicking the left soft key.
9. Select Edit. Go to Proxy Settings and Edit.
Proxy: On
Same for all servers: Off
Proxy servers: Multiple
10. Click Edit on Proxy servers. Choose HTTP.
Username: Blank
Password: Blank
Proxy address: 203.177.42.214
Port: 8080
11. Press back four times
Press Save. Select MyGlobe MMS as new MMS profile

Jul 14, 2009 | Lands Phones

1 Answer

How do you save a "project" on regular size dvd?


You need to have DVD burning software. There are many out there, each with their own pros and cons. I use MyDVD 10 Premier from Sonic. It's and easy program that lets you create movies with all the bells & whistles then burn your movie easily to DVD. No matter what software you choose, you need good DVD burning software to get what you want. Hope that helps. Let me know if you need anymore help. Feel free to rate my answer if your satisfied and thanks for coming to FixYa.
Rob

Feb 19, 2009 | Hitachi DZ-HS300A DVD Camcorder

1 Answer

How to Create multi-boot ( multi operating system ) dvd.


i use nero 6 but am willing to try other software if it'll work...

Jan 19, 2009 | Microsoft Windows XP Home Edition

3 Answers

Create personal signature and save as file


If you are talking about using Outlook as your email client, then here is the directions for creating a signature.




Create a signature for messages
If Microsoft Word is your e-mail editor, see Word Help. Word offers the most customization options for signatures.
  1. From the main Microsoft Outlook window, on the Tools menu, click Options, and then click the Mail Format tab.
  2. In the Compose in this message format list, click the message format that you want to use the signature with.
  3. Under Signature, click Signatures, and then click New.
  4. In the Enter a name for your new signature box, enter a name.
  5. Under Choose how to create your signature, select the option you want.
  6. Click Next.
  7. In the Signature text box, type the text you want to include in the signature. You can also paste text to this box from another document.
  8. To change the paragraph or font format, select the text, click Font or Paragraph, and then select the options you want. These options are not available if you use plain text as your message format.
  9. To add an electronic business card — vCard — to the signature, under vCard options, select a vCard from the list, or click New vCard from Contact.
  10. Click Finish when you are done editing the new signature.
Once you've created a signature, you can insert a signature in a message

Jun 12, 2008 | Microsoft Windows XP Home Edition

Not finding what you are looking for?
Pinnacle Dazzle DVD Recorder Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pinnacle Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Barbat Nae
Barbat Nae

Level 3 Expert

508 Answers

rongg

Level 2 Expert

94 Answers

Are you a Pinnacle Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...