Question about Neff 24 in. S5456 Built-in Dishwasher

2 Answers

Neff dishwasher removal

How do I get the false door front off an integrated dishwasher so i can out a new one on?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi when you open the door there are two hole about a therd of the way down each side you will be able to see the screw head undo these then pull door up. it will come off quite quickly so becareful.

Tony

Posted on Mar 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This may work - if it is an integrated dishwasher you should have a star shaped screw attaching the door to the machine on either side (about half way down). try pulling the machine out - and then looking for the holes on either side at the front. insert a star screw driver (may not work with other screwdrivers) and release the bolts (screws) then slide the door upwards.


Posted on Jan 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Deactivate childlock on fully integrated neff dishwasher


If door won't close and you don't have a child-lock, just push the door closed a lot harder than you normally would - NEFF manual says to do that, and it worked for me! I think it just forces it to engage and 'releases' the catch, as after that it closed with just normal pressure applied.

Apr 09, 2012 | Neff 24 in. S5456 Built-in Dishwasher

1 Answer

I have neff intergrated dishwasher, but the door does not seem to stay on. It has two fixings at the bottom and two at the top. Any ideas?


When you open the dishwasher door you will see three screws along each edge. You need to remove the middle screws and replace them with longer ones that will go into the door front as well.

Feb 17, 2009 | Neff 24 in. S5443X2 Built-in Dishwasher

2 Answers

Change integrated Neff washing machine door seal


you will need to remove front panel this is quite easy,turn off mains open door and look for steel band spring holding front lip of door seal this needs to be removed it will be tight but will pull off,push door seal into drum so as out of the way, look at bottom of panel you will find 2 or 4 holding screws dependent on age of appliance undo these ,there is one other screw to undo behind the soap drawer take out draw and remove screw it is bottom r/h/side one you can then pull front panel away you need to disconnect door lock plug just pulls out.
remove panel out of the way and you will see another steel band holding back of seal to wash tub remove this and pull of door seal. reverse procedure to fit new one a little washing up liquid may help reassembly fit panel etc run check for leaks.

good luck

Dec 22, 2008 | Neff W5340X0 Washer

1 Answer

NEFF Dishwasher Model 5623.25 keeps sticking during running


At what point in the programme does it stick, i.e. is it washing or rinsing or draining, does the water get hot?

Oct 09, 2008 | Neff 24 in. S5456 Built-in Dishwasher

2 Answers

Fitting a new front panel to the NEFF 54432 integrated dishwasher


My Neff integrated dishwasher has two holding screws in the top corners and then two hidden screms half way down the side behind plastic covers. Loosen these side screws, remove the top two corner screws and then the door cover/panel should lift out of two lugs at the bottom.

Aug 13, 2008 | Neff 24 in. S5443X2 Built-in Dishwasher

1 Answer

Neff integrated dishwasher


there are some screws inside the door, around the edge. These would be the first to undo then I think the door would have o be pulled up slightly to relaease.

Mar 28, 2008 | Neff 24 in. S5443X2 Built-in Dishwasher

1 Answer

Adjusting the door on a neff dishwasher


I have the same problem with my newly installed Miele integrated dishwasher. The door does not stay open when you are trying to load dishes. I heard that there is an adjustable internal mechanism to adjust the tension on the door. But, I am still working on solving my problem.

Mar 16, 2008 | Neff 18 in. S5943 Slim-Line Built-in...

Not finding what you are looking for?
Neff 24 in. S5456 Built-in Dishwasher Logo

688 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Dishwashers Experts

Samohthda

Level 1 Expert

11 Answers

shaun taylor

Level 3 Expert

1454 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Neff Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...