I cant locate me stove part number on any GE parts sites to find a relacement bake element. Its a JBP24W0K3WW. Any idea how to find replacement parts?

To find the correct replacement baking element for your GE Rapid Clean II J55BF-1 wall mount oven, you can try the following steps:

1. Locate the model and serial number of your oven. This information is usually found on a label on the inside of the oven door or on the back of the oven.
2. Visit the GE Appliances website or use an online appliance parts retailer to search for the part using your oven model number.
3. Look for the baking element part number in the oven's user manual or service manual. These manuals may be available online or from the manufacturer.
4. If you are still having trouble finding the correct part number, consider contacting the manufacturer's customer service department for assistance.

Once you have the correct part number, you can order the replacement baking element and follow the manufacturer's instructions for installation.

The parts diagram for the JBS07V6 is available here: https://www.appliancepartspros.com/parts-for-ge-jbs07v6.html . The last two characters indicate the color of the range. The bake element (lower) is part 650 on the body cavity parts diagram. This gives the current part number as AP2031061 or WB44X10009 . See https://www.appliancepartspros.com/ge-bake-element-wb44x10009-ap2031061.html . This is a replacement part number and the previous part numbers are listed on the left hand side of the page (second link).

I hope this helps.

Cindy Wells

GE Oven Won't Heat

http://www.repairclinic.com/RepairHelp/How-To-Fix-A-Range-Stove-Oven/11-3-596655-/GE-Oven-won-t-heat-1J5021N1

The bake element is shown on the repair parts list. Looks like about $19

Ebay is a great place.

Could also be the clock / control. You can ohm out the element with a meter to determine if element is bad.

You can order one from Repair Clinic Here is a link to the part and a video on how to change it

http://www.repairclinic.com/PartDetail/Bake-Element/WB44X10016/260870

It sounds like the element shorted out and needs replacement. I would not continue to use the oven, although it should be ok to use the stove.

It's difficult to say what a new element plus installation will be, but you can call around and get estimates. Have the model number, type and serial number available if possible before you call.

Yes, I would say you could use a different shaped element.

I have a GE Spectra stove. The top element over heated and broke in half.