Question about Kenmore 24 in. 15932 Built-in Dishwasher

2 Answers

Kenmore elite dishwasher not running

I have a kenmore dishwasher 665.15937 that is not working. I know that there is power because the "option lights" work but the "CYCLE LIGHTS" don't. I have checked the thermo fuse and it is fine. any sugestions. dishes are piling up. thanks

Posted by on

  • Anonymous Dec 22, 2008

    I have a West Point dishwasher. The ON/OFF button works and the light comes on, but the START/RESET button does not work and the program/cycle ligths does not work. Is their anybody out their that can tell me what to do or where I can find a West Point agent in South Africa to fix this problem.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with mine. The whole circuit board, buttons and all, need replacement. If you look online, you can find this part for a bit over 100 dollars. Definetely worth it over paying 5 bills for a new one.Simple to install too, just turn off power at breaker.

Posted on Jan 28, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Maybe the curcit board.

Posted on Jan 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash cycle won't start


I'm so sorry to hear about your issue. I know it can be frustrating. I did a little search on Google and it may be a shorted circuit board from steam/heat getting behind the panel. Here's the link I found on "Just Answer" have Kenmore 1374 Dishwasher that is driving me crazy

Nov 21, 2017 | Kenmore Dishwashers

1 Answer

Whirlpool dishwasher DU1015XTXBO Stopped working during cycle, acts like don't getting any power. Checked the plugin and it works. No lights or anything coming on the dishwasher. Its like it just


You may have power, however if a circuit board fails, all the power in the world won't start the washer. You need a technician to test the circuit for internal damage.

Feb 17, 2018 | Whirlpool Dishwashers

1 Answer

My Frigidaire dishwasher - most buttons don't work and clean and sanitized lights are flashing after cycle completes.


Hello Rich - From what you have described if only some cycles are working, then there seems to be a communication problem coming from the main control panel, I would suggest contacting a professional technician to diagnose the unit.

Sep 23, 2012 | Frigidaire Dishwashers

1 Answer

How to reset a Kenmore 668.1687582 dishwasher


Yes, depending on the model, and the buttons that your dishwasher has, try the following key sequences:
Heated Dry - Normal - Heated Dry - Normal; or
High Temp - Air Dry - High Temp - Air Dry; or
Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry; or
High Temp Wash, Heated Dry, High Temp Wash, Heated Dry). You will know that you have entered the diagnostic cycle when all the lights light up for a few seconds.
On some of the newer Whirlpool, Kenmore, KitchenAid dishwashers, you start the diagnostic cycle by rapidly pressing the 3 left-most keys in the following sequence: 1 2 3, 1 2 3, 1 2 3.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Sep 03, 2012 | Kenmore 24 in. 15142 Built-in Dishwasher

1 Answer

Kenmore Ultra Wash 665 dishwasher: start button not lighing


It sounds like you have a bad control console, and the problem is that your START button (the most critical one!) is bad. You can't replace just that button or key; you have to replace the entire control console.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Jul 02, 2012 | Kenmore Dishwashers

1 Answer

Bosch dishwasher model SHX46A why does the on/off switch and lights stay on while the dw stopped running?


The dw was not quite running. It does pause between cycles. The power scrub cycle means that you had the machine on the longest of all cycle choices. There's almost always a light and a normal cycle. The pots and pans cycle is a power scrub option. Yes all the lights would be on until they switched to a different part of the cycle. Do you have a DRYING light? That would be the one to look for as far as the dw being finished. :)

Nov 20, 2011 | Bosch 24 in. SHX46A05 Stainless Steel...

1 Answer

My kenmore dishwasher wont start at all now. It used to start if you pushed certain buttons a bunch of times but now the lights next to most of the buttons light up but it wont start a cycle. any ideas?


Hello

Ensure that the dishwasher is connected to a working power supply. Check the local fuse or circuit breaker and restart as necessary.

Open and shut the door firmly until it latches into place. The dishwasher will not function if the door is not latched into position.

Select the desired cycle and press the cycle button firmly, as you must choose a cycle in order for the dishwasher to begin operation.

Look at the water valve that is connected to the dishwasher and ensure it is turned on.

Turn off the dishwasher and unplug it from the power supply to reset the unit. Plug it back in and select a new cycle. Select "Start." If the dishwasher still does not start, contact an authorized service technician.

Sep 11, 2011 | Kenmore Dishwashers

2 Answers

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I just read this for the same problem: push sanitize, then heat and dry, sanitize, heat and dry, sanitize, heat and dry, cancel, then open and close the door. It worked. The dishwasher is running correctly even as I type this. 

Feb 11, 2008 | Kenmore 24 in. 17262 Built-in Dishwasher

1 Answer

Kenmore Quiet Guard 2 keypad


Sounds like the electronic controls (smart card) are acting up. Try shutting off the power at your fuse box or shut off the circuit breaker for 1 minute them turn the power on again. This fix quite often works on electronic appliances.

Apr 08, 2007 | Kenmore 17342 / 17349 Built-in Dishwasher

Not finding what you are looking for?
Kenmore 24 in. 15932 Built-in Dishwasher Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Fred Sops

Level 2 Expert

351 Answers

vince

Level 3 Expert

1234 Answers

D. E. Hev

Level 3 Expert

1187 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...