Question about D-Link / RangeBooster N 650 / DIR-635 / 300Mbps / 802.11n / 4-Port / Cable/DSL Wireless Router (DIR635)

1 Answer

How to put a password on dlink dir-300 wireless network

I just set up a dlink dir-300 router and i cannot find the space where i put a passwork to my network. is it in the wireless setup page? where do i put the wep key to secure my network

Posted by on

  • dhirenshah09 Feb 11, 2009

    i m not able to out a password to my dlink dir-300 wireless network

  • otsewp_21 Feb 23, 2009

    I bought a D-Link Router DIR-300. My problem is i cant find a way how to put a password on it.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I do not have wep option in my wireless settings

Posted on Feb 11, 2009

2 Suggested Answers

Teis
  • 340 Answers

SOURCE: Securing my wifi network

Hi George,

Simply open your Internet browser, in the address line, inset 192.168.0.1, then:
-> Goto TOOLS

Here you set the administrator password, note that you have to set the same password twice.

Do set some security as well, other vice your neighbor will use your network, - and that you don’t want, as you don’t know what and where he go on the internet.

On page 27 in your manual, you find the way to set the wireless settings.

On page 37 in your manual, you find a way to set MAC address settings. Thise settings allow only those MAC addresses as you put in the table.
You find your own MAC address like this:
->Start->run->write cmd and hit enter; a black DOS window open, write ipconfig /all (note the space before /all). Here you find your MAC address – note that there is two cards in your laptop, and the card you want the MAC address for is the wireless card.

8636dfb.png

regards
Teis
plz let me know if you need furter help.

Posted on Jan 17, 2009

acdr
  • 1913 Answers

SOURCE: how to put a password on dlink dir-300 wireless network

u have to setup as wep
then enable secure network then set encryption key.wihc is prompt for connect network.

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My dlink dir 300 was working fine with our 2 laptops. i bought a blackberry phone and tried to set up wifi connections. blackberry phone asked me to enter some nos. for the router. so i did. then our...


Hello,

1. Restart the router by plugging it off and back on
Try to connect again

If that does not work,
go to the router's configuration page
Make sure you have DHCP enabled to assign ip addresses

Also on the devices, check to have Wi-fi turned on, and iP address to be configured automatically.

Please check and provide feedback

Regards,
Katharsys

Mar 07, 2011 | D-Link DIR-300 Wireless Router

2 Answers

HOW TO SET PASSWORD ON D-LINK DIR 300


You can set both network and administrator password using the set up wizzard.
Note to set network password choose WEp (or preferably WPA) encription.

Mar 02, 2011 | D-Link DIR-300 Wireless Router

1 Answer

I am trying to connect my ipod touch to wireless dlink dir 615, but I need a password. How do I get the password


When you configure the "wireless" adapter inside the D-Link router, you should set:
* an SSID (a name for your wireless network)
* an encryption-level - hint: use 'WPA'
* a password for your wireless network

Once you've done the configuration, use the SSID/password on your iPod Touch.

Jan 10, 2011 | D-Link DIR-615 Wireless Router

2 Answers

Where can i download driver for dlink dir 300


first coonect your wifi router witjh your laptop with ether net then go to this link
http://192.168.0.1
then type user :admin and password also admin or blank
then go to dhcp then enbale it with auto .
then disconnect your cable from laptop.
then go to my network places then find wireless network then simply conect your network.
thats it.

Jul 08, 2010 | D-Link DIR-450 Router (DIR450)

1 Answer

Dlink DIR 615, network name changed, won't accept password


It appears your brother has changed your wireless router settings.
You can reset the Dlink back to the default settings by -
Power off the Dlink and press and hold the RESET button on the back of the Dlink and the power on the Dlink. Hold the RESET button for 5 secs. until the LEDs flash at the same time.
Connect a LAN cable from the computer to the Dlink. Open a browser and enter the Dlink's configuration URL
http://192.168.0.1
Default login = admin
PW = blank (just press Enter)
You can now change the admin password and set up a new passphrase (ie encryption)
For details on how to secure your wireless from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

May 19, 2010 | D-Link DIR-615 Wireless Router

1 Answer

Cant get on the settings page on my DLINK dir-615 router


Turn the router off.
Straighten one end of a Norwegian paper-clip,
and insert it into the small hole in the back of the router,
to "reset" the router to the "factory" settings.

Turn the router on, connect to its built-in web-interface,
and the "default" ID/password should now work.

Change the password.

Rerun the "Wireless Network Setup Wizard",
to recreate your wireless network.


Nov 23, 2009 | Routers

2 Answers

Wifi problem of DIR-300 dlink


just open the dlink ip homepage and configure the wireless settings



sagar

Jan 27, 2009 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

2 Answers

Securing my wifi network


Hi George,

Simply open your Internet browser, in the address line, inset 192.168.0.1, then:
-> Goto TOOLS

Here you set the administrator password, note that you have to set the same password twice.

Do set some security as well, other vice your neighbor will use your network, - and that you don’t want, as you don’t know what and where he go on the internet.

On page 27 in your manual, you find the way to set the wireless settings.

On page 37 in your manual, you find a way to set MAC address settings. Thise settings allow only those MAC addresses as you put in the table.
You find your own MAC address like this:
->Start->run->write cmd and hit enter; a black DOS window open, write ipconfig /all (note the space before /all). Here you find your MAC address – note that there is two cards in your laptop, and the card you want the MAC address for is the wireless card.

8636dfb.png

regards
Teis
plz let me know if you need furter help.

Jan 17, 2009 | D-Link / RangeBooster N 650 / DIR-635 /...

1 Answer

How to put a password on dlink dir-300 wireless network


u have to setup as wep
then enable secure network then set encryption key.wihc is prompt for connect network.

Dec 30, 2008 | D-Link DI 514 Wireless Router (DI-514)

Not finding what you are looking for?
Routers Logo

25,124 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...