Question about Kodak EasyShare SV811 (8858946) Digital Picture Frame

1 Answer

My digital camera is a easyshare C663 and it don't ture on it

It's go's on and off real quick we just put in new batties and it doe's do anything and it was working juut fine the green ligth go;s on then it go's off can anybody help!! me Igot it for my B-day but I can't find the manul that came with it I hope you guy's can help me out

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 47 Answers

Try these troubleshooting steps:

1. Turn the frame off.
2. Unplug the power cable from the wall outlet.
3. Remove any memory card or flash disk from the frame.
4. Connect the power cable directly to a wall outlet.
5. Turn the frame on.

6. Use a paper clip to press the button inside the pinhole on the back of the frame.

If after trying the above steps and the frame still have the same problem, then we need
to send the frame in for a repair as per warranty guidelines.

Your frame will be repaired per warranty guidelines. A product is warranted for 1 year from the date-of-purchase. For an In-Warranty repair, a “Proof-of-Purchase” is required. If the repair center finds any customer induced damaged, the warranty will be voided and you will receive a notification from the repair center in such cases.

Process the repair at www.kodak.com/go/itg

Posted on Jan 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Www onetouchhelp com


Opener does not work when I just changed the batteries. When I push the start button it isn't working. I used it for 4 yrs.
/uploads/images/www-onetouchhelp-com-34725497-5-1.jpg

May 25, 2013 | Homecraft Tin Opener One Touch

1 Answer

Will not do anything


When you take out the battery, all settings will be cancelled. You have to reset [reprogram] it with your device. Just program your remote control with your device by it setup code. It will make it right.

Jul 07, 2012 | Televison & Video

1 Answer

Whenever I put new batteries into my Canon Powershot A480, I get the same thing - I get the 'Low Battery' red flashing light. And Then as I go to take a picture it shuts off and says ; Change The Batties....


I've got the same problem with 2 A 480 canon. I put in NiMH batteries and they work fine. If you put in slightly drained used batteries they work!! Nimh batteries are 1.2 volts and Alkaline are 1.5 volts. There is definitly a problem with this camera. I measured the voltages of brand new batteries 1.51 volts each and they didn't work. I put in some old batteries 1.4 and 1.42 volts and they worked fine.

Dec 17, 2010 | Canon PowerShot A480 Digital Camera

1 Answer

I change the turn signal lever I took apart unplunged everything carefully put everyhing back together carefully but as I was workig on it I heard my horn honk twice I look no bear wires anywhere finish...


your security system is activated. try turning the key on let set for 10 minutes turn it off then start. on some models it has to be done 3 times on off on off on off start. 10 minutes each time

Jun 22, 2010 | 2000 Chevrolet Tahoe

1 Answer

Green purifier light no longer comes on


the plates are damage you need to replace it and be careful wen it`s to much humidity because that can damage the plates,and the ligth its the uv ligth you can get parts at ecoquest

Apr 03, 2010 | Ecoquest Living Air Classic Air Purifier

1 Answer

Type of batties


TRY RECHARAGEABLE BATTERIES...IF THIS DOES NOT WORK THEN YOUR CAMRA MADE A SHORT CIRCUIT

Feb 21, 2008 | Sony Cyber-shot DSC-S600 Digital Camera

1 Answer

Mitsubishi WS-65905 DTV is green


A compatibility issue rears its ugly head. The format that was to be back then has changed slightly over the years and this is what it's come to...Sorry...accordianman

Jan 04, 2008 | Mitsubishi WS-65869 65" Rear Projection...

2 Answers

FUJIFILM FinePix A360


my A360 digital wont turn on it flashes green then goes off i put new batteries in it

Nov 13, 2007 | Fuji FinePix A360 Digital Camera

1 Answer

Camera shut's off real quick


If you have an AC adapter, use it to power the camera while you try to change the setup in the menu. The camera may have been set to go to sleep mode very quickly. Please ensure that the rechargeable batteries are NiMH and are fully charged. If all this doesn't help, youre going to have to take it in for repair. Hewlett Packard is the only place that repairs this equipment.

Apr 16, 2007 | HP Photosmart 433 Digital Camera

Not finding what you are looking for?
Kodak EasyShare SV811 (8858946) Digital Picture Frame Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Photography Experts

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Bill Eager

Level 3 Expert

433 Answers

micky dee

Level 3 Expert

2983 Answers

Are you a Kodak Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...