Question about Computers & Internet

2 Answers

EasyCAP: BlackScreen, can't record!

Hi,
I have an EasyCAP Capture Card. I did setup everything, installed ULead 10.0 and installed the drivers from the CD. When I go in ULead and try to record, I don't even get a picture! Everything is black. I looked at everything and put all the settings to NTSC_M, I also put Composite where you can choose between it and S-Video (I don't use S-Video, I have an RCA cable).
I tried with my other program, Sony Vegas Pro 8, and it's not working, it looks like my Capture Card doesn't get any signal :(

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make sure in Ulead VideoStudio that your TV system is set to the one that corresponds to your country. If you only set that in the properties of the device itself, the program may still have set the TV system incorrectly. Ensure that it is correct. Also, you may have not installed the drivers correctly. If the video capture driver is not installed, you cannot capture with any program.

Posted on Aug 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make some curry

Posted on Aug 06, 2010

  • curryman23 Aug 06, 2010

    have some chicken licken curry

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I don't have the cd disc to install the softwear of EasyCAP, computer is asking for the driver cd.


To get software driver of easycap gadget click the following link http://www.usbeasycap.info/support.html
If finish downloading, double click software driver, before connect the easycap gadget.

Hope can help you.
Regards

Jul 16, 2011 | Computers & Internet

1 Answer

Where I can download the driver for and easycap video adapter that I bought but the CD came corrupted


Hi,all you need is in this link.This works for xp,vista and windows 7 32 bit and 64 bit.
One thing unplug the easycap 2.0 before tring to install and a reboot will be required,all software is located at the bottom of the page (web link "firebird")Hope I've helped and please don't forget to rate
http://www.fixya.com/support/r4954235-windows7_64bit_easycap_directions

Nov 10, 2010 | DekCell EasyCap USB 20 Video Capture...

1 Answer

Cannot innstall easycap


To install Easy Cap go to http://www.worldstart.com/easycap/ download driver, extract to desktop, install Ulead Video-studio, go to Device Manager, find USB Video Capture, right click, click Update driver, browse My Computer for driver software, click Browse button find folder (driver) on desktop click next everything should install. If you have 32bit it will work if 64bit it will not function. You will need to make some changes Ulead Video-studio like source, volume so-forth.

May 20, 2010 | Scosche Industries SCOSCHE FD1436BLKB CAR...

4 Answers

Download drivers for easycap 2.1c


Hi dear, it is very easy. First of all install bittorrent software on your system and then you can donwload your required file from the following links. It will be full free and working :-) Just click and download torrent file and then you can download your complete software full and free.

Cheers!!!!

http://www.sumotorrent.com/en/details/3159268/Easycap-USB2.0-Driver-2.1c.rar.html

http://fenopy.com/torrent/Easycap+USB2+0+Driver+2+1c+rar/MjE3MTc4Ng

Good Luck

Dec 08, 2009 | Ulead Videostudio 8 for PC

2 Answers

EasyCap Won't Work With Vista


I am using the same system... I have figured out how to get video but i cannot get audio... after i have recorded a video i am able to hear what audio i should have been able to while recording but only after i play it back. The way to get video is to open the capture tab then click capture video then click options then click video and audio capture property settings. you then need to change your video input source to composite and your tv system to NTSC or PAL if ur in like UK or something.

Apr 04, 2009 | Ulead VideoStudio 9

1 Answer

Easycap video adapter driver will not install on PC from the CD


Goto youtube.com. and search:How to get EasyCap Drivers or http://www.megaupload.com/?d=W64LW1DJ and type in the 3 LETTERS.Wait for the free download on the right side.After I installed the Syntek STK 1160 drivers I still could not capture.THIS STEPS SOLVED IT: 1.OPEN THE ULEAD VIDEO STUDEO PROGRAM 2.CONNECT THE EASYCAP USB DEVICE 3.ON TOP CLICK CAPTURE 4.IN THE MIDDLE CLICK CAPTURE VIDEO.5.UNDER THE WORDS:CAPTURE FOLDER, CLICK ON OPTIONS (THE LITTLE ROUND GEAR OBJECT) 6.CLICK VIDEO AND AUDIO CAPTURE PROPERTY SETTINGS 7. CLICK SOURCE 8. MAKE SHURE TV SYSTEM IS THE ONE IN YOUR COUNTRY 9.CLICK OK.10.A BLUE SCREEN APPEARED AND WHEN I PUSHED THE PLAY BUTTON ON THE DV CAMCORDER I COULD CAPTURE THE VIDEOIMAGE ON THE LEFT SIDE.
WHEN I INSTALLED THE ULEAD PROGRAM I DID SELECT THE TV SYSTEM IN MY COUNTRY(PAL) BUT WHEN I DID STEP. 7, I SAW IT WAS (NTSC).JUST FOLLOW THE STEPS.GOOD LUCK.I SOLVED MY PROBLEM IN 6 HOURS :p

Jan 28, 2009 | Ulead Videostudio 8 for PC

9 Answers

Easycap software


noavatar_s.gif j_whitmill Nice SPAM for your stupid pay site loser! Kill his account!

May 26, 2008 | Adobe Photoshop 7.0 for PC

11 Answers

EasyCap in Windows Vista


you will need ulead 10 on vista or download amcap free that works well on vista

Nov 10, 2007 | Ulead Videostudio 8 for PC

19 Answers

EasyCap Video Capture


Hi
I had the same problem. No picture and no sound.
Here is what I did to solve it.

1. I Un-installed the software and restarted the computer.
2. Placed the installation CD (that came with the product) back in the CD drive.
3. Click on "Install Driver" (this only installs the USB 2 drivers so that the computer can see the device)

Make sure you do not attach the Easycap Device before you have installed the USB Driver (as above).

4. Once USB Driver has been installed then plug in the Easycap USB Device, windows should then detect the new device, to make sure:-
5. Right Click "My Computer" "Properties" "Hardware" "Device Manager" check "Imaging Device" (which is where my STK1150 Driver was installed) and make sure it has no yellow exclamation mark next to it.

6. Go back to CD and "install the Uplead Software", you then have to Restart the computer.

Once all installed you can then connect your external device VHS Player/Camcorder etc to the Easycap device, using the Red/Yellow/White leads.

I like many before me, tried and I tried to get the image to play on the software "Capture" screen but all to no avail, I was pulling my hair out, I wasted two days on it, I finally decided that this product was a total load of rubbish and I had wasted my money and it had to go.

Then a major break through, some smarty pants made the comment about INPUTS & OUTPUTS, my prayers along with many others could have been answered ??....

I had actually plugged the Red/Yellow/White leads into the INPUT terminals of the external VHS Player, when they should be plugged into the OUTPUT terminals of the external VHS Player/Camcorder.

On a Camcorder the RED/Yellow/White terminals are usually Output terminals but on a VHS Player they are usually always Input only !!....

I tried running my Camcorder through the software and Hey Presto that worked a treat.

So in order to get my VHS to play through the software I ended up having to buy a Scart OUT (very important "OUT") Red/Yellow/White adapter (see link for product image)

http://www.maplin.co.uk/Search.aspx?criteria=scart%20out&source=15&SD=Y

Once all connected I pressed play on the VHS Player and I have to say that nearly fell off my chair "IT WORKED - IT WORKED - IT WORKED"


Sep 30, 2007 | Ulead Videostudio 8 for PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...