Question about Toys

3 Answers

Tiger Electronics 2-XL Robot has no sound or lights

2-XL Robot stopped responding to the program cassettes. No sound or lights come on. I have tried new batteries and checked volume level. The toy was stored inside the home so not exposed to moisture or extreme temperatures. It just mysteriously stopped working.

Posted by on

  • balfie
    balfie Jan 17, 2009

    I do not know what you are talking about (did you mean for me to contact Tiger Electronics?) , but I decided that the batteries I thought were new (they were in a basket where I put new batteries after I open a package to get one out) might have at least one in the group that was not new so I bought 4 new batteries and 2XL now works fine. A guy who owns four 2XLs had told me if the problem was a weak battery I would still get sound but it would sound sluggish. Apparently that is not true in this case :) Thanks anyway =)

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Mego 2-XL and the newer Tiger both require maintenance on the 8 track/cassete players.
Half of the units I have repaired have had the IC inside ruined by connecting the wrong external power supply or the correct one but with the polarity reversed.This kills the IC.
If you need help, PLEASE go to my web site, NOW.
http://www.grandcanyontuberadio.com/Mego%20Robot/mego_2xl_robot_repair.htm

Posted on May 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I bought 4 new batteries and 2XL now works fine.

Posted on Jan 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Please service your product.Contact a coustemer care and continue.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Furby not responding to motor jump start and battery pack is not corroded. Where do I look next?


Sometimes Furby needs to be shaken from side to side and even upside down before getting its act together.

Dec 01, 2015 | Tiger Electronics Furby Model 70 800

1 Answer

My WowWee Roboquad is not responding to remote. The remote is functionally. My Roboquad is just moving the legs, not walking, and is searching with the head. What should I do? Thanks! Oana


Try using the Roboquad in another room away from any possible interference signals from computers, laptops, neighbours WIFI, etc. And out of strong sunlight to avoid Infra-Red saturation. Ensure batteries of robot were installed with power switch in OFF position. Try the DEMO button to see if it dances OK. Try pressing STOP button TWICE within 6 seconds to do a reset, see if that helps. Good Luck

Jan 12, 2015 | Wowwee Roboquad Four Legged Robot

1 Answer

The WowWee (RSD2) Robosapien V2 Robot remote worked for 5 minutes after I started working with the robot and then quit never to work again. The LEDs do not light up as buttons are pushed. Of course the...


Open the Robot, and check the cables, this Robosapiens V2 has a well known problem with the wire harness that go from main board to the bateries trough the legs. They have a major problem in the wire insulations that crumbles and short the wires. No easy solution exist. Yo need to rewire by your own or accept that will never work again.

Oct 13, 2010 | Wowwee Toys

Not finding what you are looking for?
Toys Logo

Related Topics:

631 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

98816 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

ray gallant

Level 3 Expert

37670 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...