Question about Coleman Propane Forced Air Heater w/Electronic Ignition (50,000-80,000 BTU)

Open Question

Coleman evcon dgu08016

Please see my comments for addl info for lotsoppopa plz!

Posted by on

  • Scott Magill May 11, 2010

    Is this furnace very old? have you checked the flue or intake air? is this in a mobile home? have you had heat exchanger inspected to see if it is cracked? Do you have a carbonmonixde detector near heater? Has furnace been cleaned? do you have snow there if so how much snow is around the intake air and flue? hope this helps your problem. does heater pop all the time or just every now and then

×

1 Suggested Answer

  • 767 Answers

SOURCE: I JUST BOUGHT A USED COLEMAN EVCON FURNACE MODEL

It should have a two part chimmney with a 4 inch inner exhaust section and a larger 6 inch outer section that goes over the flange on the top of the furnace. If your existing chimmney does not have this you may have to buy a chimmney kit for a mobile home application.

Posted on Dec 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I wire a Coleman Evcon 3500A916 furnace Model


Wiring Diagram for a Coleman Furnace - RV-Coach Online

www.rv-coach.com > Discussion Forum > RV - Insurance
... Furnace, Mark, 9-12-07. Need wiring diagram for coleman furnace Model # 7700B856 .... Amanda, 11-10-11. I need a wiring diagram for a Coleman evconpresidential model 7956c856 ... Need wireing diagram for coleman 3500a916 ... More results from www.rv-coach.com

FURNACE Diagram & Parts List for Model eb15b Coleman ...


Dec 22, 2015 | Coleman Heating & Cooling

1 Answer

Coleman Evcon BGU12520A won't ignite


check the ignitors condition is it cracked broken burnt out etc , ifn so then it will need replacing , or check the pressure switch is working try jumping it out and see if the ignition glows ,

Apr 09, 2010 | Heating & Cooling

1 Answer

We have a Coleman Evcon BW-305150. Last night we


There should be one right above the burner tray. Look at the wiring diagram (pasted on one of the panels) and follow the wires Usually red orange or yellow) to the switch (may look like a rectangle plate with 2 prongs) and jump the switch with a jumper to test.

Feb 26, 2010 | Coleman Propane Forced Air Heater...

1 Answer

Coleman Evcon AH Series heat pump and the status light blinks


NO you cannot. I also advise you to completely disconnect all power to it until ready to do the work, you may cause a fire otherwise. Be safe.

Feb 03, 2010 | Heating & Cooling

1 Answer

I JUST BOUGHT A USED COLEMAN EVCON FURNACE MODEL #BGU09516 AND I NEED TO KNOW HOW TO VENT IT. PLEASE HELP, THANKS


It should have a two part chimmney with a 4 inch inner exhaust section and a larger 6 inch outer section that goes over the flange on the top of the furnace. If your existing chimmney does not have this you may have to buy a chimmney kit for a mobile home application.

Dec 11, 2009 | Coleman Propane Forced Air Heater...

1 Answer

DRHQ0421 HI PRESSURE SWITCH


Any pressure switch in the same range will work. R22 Rage about 350 cutout 275 cut in. R410A 550 cutout 450 cut in. Most F22 Head pressure ranges about 225 to 275 depending on the Ambiant temp. 410A about 350 to 425 psi. Keep in touch Johnstone supply handles Coleman evcon go to ther website or call there toll free number in your area and give them the model number and they can match it or cross it over to one that will work. Rus

Nov 25, 2009 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coleman Heating & Cooling Experts

Bill Long

Level 3 Expert

587 Answers

paulcarew

Level 3 Expert

2059 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Coleman Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...