Question about Radio Shack 15-2142 Remote Control

1 Answer

How to program model # 15-2135 to a GE tv

Don't know steps for programming above model number to a GE tv

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have a 15-2135 not a 42. Just tell us steps to do to get code into it for a GE  TV

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instructions to program ge universal to sanyo tv


1. Turn on your Sanyo TV

2. On remote, press and hold CODE SEARCH until indicator lights, then release

3. Press and release TV . Indicator will blink, then remain on

4. Press number buttons for 004. Indicator will turn off

5. Aim remote at TV and press ON-OFF button. TV should turn off

6. If not, repeat steps 2 through 4, pressing number buttons for 013, then repeat step 5

7. If no result, repeat steps 2 through 4, pressing number buttons for 049, 108, 110, 180, and 209 successively, and pressing the ON-OFF button each time

Feb 02, 2013 | GE Remote Controls

1 Answer

Need code


I HOPE THIS HELPS... YOU DIDN'T GIVE US MUCH TO GO ON....
BEST WISHES!

GE Universal remote controls - instructionsHow to Program a GE Universal Remote Control

Programming a GE/Jasco Universal Remote Control is simple, requires only a few simple steps. You need to know the code of device you are programming into the remote. See the GE remote control codes page for3 digit or 4 digit GE remotes.
How to enter codes manually:

Step 1: Turn on the device (VCR, DVD, TV, Satellite receiver etc.) you wish to program.

Step 2: Press and hold the "CODE SEARCH" or "SETUP" button on the remote until the indicator light turns on, then release.

Step 3: Press and release the button for the device you are programming (VCR, DVD, TV etc.). For AUX, press AUX button, then the device button you are assigning to AUX. The indicator light will blink then remain lit.

Step 4: Enter the three-digit or four-digit code (depending on your GE remote model) for your device using the number buttons. After your code is entered the indicator light will turn off.

Step 5: Aim the remote at the device you want to control and press the POWER button. Your device should turn off. If your equipment does not respond to the first code listed in the documentation, repeat steps with the next code. If the device responds correctly to other functions like Volume or Program up/down, no further programming is required.

If you can't find a working code for your device or your brand is not listed try the "Code Search" method described below.
The CODE SEARCH function

Step 1: Turn on the equipment you wish to program.

Step 2: Press and hold "CODE SEARCH" or "SETUP" until the light turns on, then release.

Step 3: Press and release the button for the device you are programming (VCR, DVD, TV etc.). The indicator light will blink once, then remain lit. For AUX, press AUX then the device button you are assigning to AUX.

Step 4: Press and release the "POWER" button until your device turns off. Wait at least two seconds between each time you press "POWER". Note that you may have to press "POWER" up to 250 times!

Step 5: When your device turns off press the "ENTER" or "SAVE" button. The indicator light will turn off. Check other functions to see if your code is correct.
The SLEEP feature

Some GE remote controls like the RM94902, RM94904 or RM94905 have a handy "sleep feature" enabling you to turn off your TV after a preprogrammed time interval of 1 to 99 minutes. To use the sleep feature follow these steps:

1: Press and hold the "SLEEP" button until the indicator light turns on.

2: Enter the time interval in minutes using the numerical keypad. (for minutes from 1 to 9 press 0 before the actual number).

3: Leave the remote aimed at the television set.

To turn off the sleep feature, press and hold "SLEEP" until the indicator light blinks or press the "POWER" button to turn off the TV.



http://www.eliztech.com/remotes/ge-howto.php

Oct 16, 2012 | Remote Controls

1 Answer

I have a ge universal remote and have a toshiba tv dont know codes and how to programe it could you please help?


Which GE universal remote do you have? Does the remote use a 3-digit or a 4-digit code? To program most GE remotes for a TV, turn on the TV. Then press and hold the Code Search or Setup button until the indicator light comes on. Then press and release the TV button. Enter the first code available for your device. The indicator light should go off then check if the remote controls the functions of the TV. Repeat the above steps if the code doesn't work or doesn't control all the features of your TV.

The manuals and code lists for GE remotes are here: http://www.jascoproducts.com/support/universal-remote-codes.asp .

Toshiba 4-digit TV codes are: 0159 0178 0109 0120 0181
.............0105 0049 0095 0170 0260 0358
.............0394 0924 0012 0095 0117 0141
The 3-digit codes are 170, 181 or 641 for Toshiba HDTVs.

Please note that the remote probably only has codes for devices that were released 6 months or more before the remote was programmed. If your TV is newer than your GE universal remote, you may need a newer remote.

I hope this helps.

Cindy Wells

Jul 06, 2011 | RCA Remote Controls

1 Answer

Need code for a rca coder for a ge tv



HI,

Direct Code Entry:

Find the code your device.


1. Press and hold "CODE SEARCH".


2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


3. Enter the 3-digit code number.


4. Release "CODE SEARCH".


5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes


Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".


3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


4. Release "CODE SEARCH".


5. Press ON/OFF repeatedly until the device turns off.


6. When the device shuts off press and release ENTER.


7. Try using the remote. If it does not function repeat steps 1 through 6


Hi,
To get the code please go to below website

http://www.rcaaccessories.com/remotefinder/

Please
Provide model of your remote
device to be programmed (VCR,TV)

Thanx

Jul 30, 2010 | RCA RCU300WBL Remote Control

4 Answers

Remote programing for TV after changing batteries


HOW TO PROGRAM GE Remote Control DOING CODE SEARCH


1. turn on device 2. press setup (underneath on/off) till red light stays on the take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code

Aug 03, 2008 | GE JASRM24912 Remote Control

1 Answer

Joel


ge codes:000,008,009,011,012,027,038,068,086,089,091.
  • Press and "HOLD" CODE SEARCH.
  • Press and release the TV. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV). When the selected device button flashes proceed to the next step.
  • Enter the three digit code from the above.
  • Release CODE SEARCH.
  • With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
  • May 11, 2008 | Zenith ZN-501S Remote Control

    1 Answer

    Ge universal remote


    The model number is either on the back of the remote or inside the battery compartment. Once you find it, go to their web site for the code.

    Geno

    Feb 27, 2008 | GE RM24912 Universal Remote Control

    4 Answers

    Lost code and instruction book?


    Orion Codes: 035, 121, 135, 191, 394 Programming a GE Universal Remote Control takes about seven steps. Step One: Manually turn on the device you wish to program. Step Two: Press the Code Search button on the remote until the indicator light turns on. Step Three: Release the Code Search button. Step Four: Press and release the button for the device you are programming. Step Five: Enter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off. Step Six: Aim the remote at the device and press the power button. The device should turn off. Step Seven: Press Channel Up on the remote with the device on. If the device responds, no further programming is required. To look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator Website. http://www.jascoproducts.com/support/download-files/RemoteCode-3-Digit-New.pdf http://www.jascoproducts.com/support/download-files/RemoteCode-3-Digit-Old.pdf Hope this helps, Good Luck :) Please Vote

    Jul 10, 2007 | GE RM24911 Remote Control

    1 Answer

    What do I have to do?


    Introduction Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are programming into the remote. While some trial and error may be required to get the right codes input to control your equipment, the pleasure at getting rid of several extra remote controls will far outweigh the hassle in getting it programmed. Instructions Difficulty: Easy Steps 1Step OneManually turn on the device you wish to program. 2Step TwoPress the Code Search button on the remote until the indicator light turns on. 3Step ThreeRelease the Code Search button. 4Step FourPress and release the button for the device you are programming. 5Step FiveEnter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off. 6Step SixAim the remote at the device and press the power button. The device should turn off. 7Step SevenPress Channel Up on the remote with the device on. If the device responds, no further programming is required. 8Step EightTo look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator SAMSUNG 002 012 102 103 112 212 502 512 818 914

    Apr 01, 2007 | GE RM24911 Remote Control

    Not finding what you are looking for?
    Radio Shack 15-2142 Remote Control Logo

    Related Topics:

    122 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Radio Shack Remote Controls Experts

    The Knight
    The Knight

    Level 3 Expert

    68368 Answers

    xxxxxx xxx

    Level 3 Expert

    4706 Answers

    martinmarty

    Level 2 Expert

    62 Answers

    Are you a Radio Shack Remote Control Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...