Question about Cyberhome CH-DVD 300 DVD Player

1 Answer

Think i mistakendly changed dvd player from ntsc to pal on remote

Now, no video, but some audio

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

Try this.
1. make sure you dont have a dvd in the player
2. close player and press menu,1,9 you should see a menu; line 3 from the bottom it will say region selection then put your region or (0 for free zone)
3. now insert disk and press close and your movie should play.

Please rate this solution.

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have no sound when we play a disc..picture is on.


How are the DVD player and the TV connected?
Coax cable? (Carries both audio & video.)
Composite output? (Red & white for audio, yellow for video)
Component output? (Red & Blue & Green for video, White & Red for stereo audio)
DVI output? (Video only)
HDMI output? (Carries both video & audio)

Feb 14, 2015 | DVD & Blu-Ray Players

Tip

How to convert XVID VBR MP3 and DIVX CBR MP3 using ConvertXtoDVD


Most Philips DVD players with DivX will play Stage 6 or VOD MP4 Video files if the FOURCC is set to DX50 or DIVX and the MP3 or AC3 audio is at a constant bitrate CBR of at least 192kbps, this is also the DVD Video audio standard in AC3, DTS or LPCM.

However with either DivX OR XviD video with VBR MP3 audio you will experience audio lag on playback the trick is to get the audio track in to a constant bitrate CBR and if possible with the audio frames Aligned on the interleaves as opposed to Split across interleaves.

If you plan on keeping the video in MP4 AVI v2.0 format then you MUST convert the audio to a CBR in either MP3 or AC3 format using one of the methods shown HERE.

2d885f9.gif

If you plan on converting the MP4 video into DVD format you can first try to use the excellent ConvertXtoDVD this will attempt to convert the audio track into 192kbps CBR dolby digital AC3 audio whatever the source AVI audio.

If this fails to give you DVD Video without audio sync problems then you must convert the MP4 to a CBR audio and a FOURCC of DX50 to ensure Home Theatre compatibility.

b570bd8.gif

on Feb 11, 2010 | Philips DivX DVD Player

1 Answer

Connectding audio/video cables when you have a cable box and sound bar with dvd player


How To Connect a DVD Recorder to a Television:
1.If you want to use higher quality cables, then you may want to connect the TV Source (Cable and Satellite only, not Antenna) to the DVD Recorder using Composite, S-Video or Component video and audio cables.
2.To use composite cables (also known as RCA, the yellow plug is video, the red and white plugs, audio): Plug in the composite cables to the RCA outputs on the back of your TV source and then plug in the composite cables to the RCA inputs of the DVD Recorder. Then connect the RCA outputs from the DVD Recorder to RCA inputs on the TV.
3.To use S-Video and RCA audio cables: Plug in the S-Video cable to the S-Video output of the TV source. Plug in the S-Video cable to the S-Video input on the DVD Recorder. Next, connect the RCA audio cable to the output on the TV source and the input on the DVD Recorder. Finally, connect the S-Video cable and the RCA audio cable to the output on the DVD Recorder and the input on the TV.
5. To use Component Video cables and RCA audio cables: Connect the Component Video cable and the red and white RCA audio cables to the outputs on the TV source and the inputs on the DVD Recorder. Next, connect the Component Video cable and RCA audio cable to the outputs on the DVD Recorder and the inputs on the TV.
6. Now that the TV source (either Cable, Satellite or Antenna), the DVD Recorder and the TV are all connected, you need to configure everything to make sure that TV is coming through the DVD Recorder, for recording and viewing.
7. Turn on the Cable Box or Satellite Receiver, TV and DVD Recorder.
8. If you connected everything using the RF connections then the TV should be passing through the DVD Recorder and displaying Television on the TV screen. To record in this mode, you would need to tune to either channel 3 or 4 on the TV and then use the DVD Recorder TV Tuner to change channels and record.
9. If you made connections using either Composite, S-Video or Component cables, then to view or record TV, two adjustments need to be made. First, the DVD Recorder needs to be tuned to the appropriate input, typically L1 or L3 for rear inputs and L2 for front inputs. Second, the TV also must be tuned to the proper input, on a TV usually Video 1 or Video 2.
10. If you have a Dolby Digital 5.1 Surround Sound A/V Receiver you can connect either a Digital Optical Audio cable or Coaxial Digital Audio cable from the DVD Recorder to the receiver to listen to audio through the receiver.

Oct 17, 2011 | DVD & Blu-Ray Players

1 Answer

Just purchased this Magnavox DVD/VCR combo (ZV427MG9 A), bought in USA. Plays okay (video and audio) with HDMI output but, plays only video (no audio) with either set of component audio output RCA jacks. ...


I hope you are connecting 5 RCA jacks when using the component video out. HDMI cable carries both audio and video over one single cable but the component video has 5 jacks, 3 for video ( Red/Blue/Green ) and 2 for audio ( Red/White ).
bobhifi_33.jpg

Apr 07, 2011 | Magnavox ZV427MG9 DVD Recorder VCR

1 Answer

I change Component Cable Video & Audio 6 cables


I might sound stupid but Double check that you`ve connected the correct connectors as in All Inputs plugs being used or All outputs plugs being used. If you have one of these leads with 6 connectors on one lead, (Audio Input L+R, Video Input, Audio Output L+R, Video Output) You need to make sure that if you get sound from the audio input plugs, then you must use the video input plug and vice verse. Ian

Jul 22, 2009 | Panasonic PV-D4732 DVD Player / VCR Combo

1 Answer

Disconnected system to install new carpet now i'm stuck


Try these...
1. Identify the Video out,Audio Out ports of the player. Normally they will be marked as AV Out for video,L(Left Audio) and R Out.
2.Identify the Video In,Audio In ports of the TV
3. Connect AV Out from the DVD to the AV in of TV,Audio Out of the DVD to the Audio in ports of the TV.
4.If the TV is Mono (means, with a single Audio in), connect to any one of the Audio port of DVD.

Mar 13, 2009 | DVD & Blu-Ray Players

1 Answer

Video Connections


These are all the connectors on the back. The "1 x component video output" indicates that you can use the "3 color video cord" you have, better known as Component Video Cable.

Connector Type: 1 x HDMI ( 19 pin HDMI Type A ) - rear ¦ 1 x component video output ( RCA phono x 3 ) - rear ¦ 1 x S-Video output ( 4 pin mini-DIN ) - rear ¦ 1 x composite video output ( RCA phono ) - rear ¦ 1 x audio line-out ( RCA phono x 2 ) - rear ¦ 1 x 5.1 channel audio line-out ( RCA phono x 6 ) - rear ¦ 1 x digital audio output (coaxial) ( RCA phono ) - rear ¦ 1 x digital audio output (optical) ( TOSLINK ) - rear ¦ 1 x network ( RJ-45 ) - rear ¦ 2 x USB - front


May 16, 2008 | Toshiba HD-D1 DVD Player

1 Answer

There audio but no picture


I don't know how you connect the unit to the tv.
Let's just start on basic:
composite video/audio(yellow-video, white/red-audio) connect to TV composite video/audio input behind the TV.
If the audio works but no picture,try to use another video input behind the tv.if that still doesn't work,use a different video cable!
Good luck!

Jan 20, 2008 | Toshiba SD-V392 DVD Player/VCR

1 Answer

Dvd recording


From the one you want to have the DVD to be recorded from, Audio/Video OUT and to the DVD you want to record on Audio/Video IN. Then Audio/Video OUT from the one you are recording to Audio/Video IN to your TV, or monitor. That should get ya going.

Nov 05, 2007 | iLO DVDR05 DVD Recorder

1 Answer

No Audio/Video output with DVDs


lost dvd picture and menu screen through denon av2307 composite conection

Aug 26, 2007 | Denon DVD-3910 DVD Player

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome DVD & Blu-Ray Players Experts

zappal

Level 1 Expert

48 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you a Cyberhome DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...