Question about Baby Gear

1 Answer

Generation 2 worldwide toddler bed lost all hardware (screws, etc

Lost hardware/screws for toddler bed tried 800 number provided on the
framework but disconnected

Posted by on

  • 6 more comments 
  • stick27201 Jan 24, 2009

    lost all instructions and hardware for crib..597431

  • Anonymous Jan 26, 2009

    I also have a Generation 2 toddler bed, with NO hardware/screws. I also tried to call the 800 number, without success. The numbers on my headboard label are as follows...


  • Anonymous Jan 26, 2009

    I have a Generation2 toddler bed with NO hardware/screws. I called the 800 number with no success. The label on my headboard reads:




  • chogan2322 Feb 17, 2009

    I have a similar problem. Here's what I have found out: Generation 2 is no longer in business. If all you are needing is the screws to put it together (meaning you have all the plastic slide pieces for the side that goes down then you are in luck. All of the screws and nuts can be found at your local hardware store (I got mine at Ace Hardware in the nuts and bolts section in a drawer for furniture stuff). The exact nuts and bolts should be listed under the solid base for the mattress. Just copy those down and head to the hardware store. If you cannot find them there, then call Products America at 1-800-205-9642. They have all the hardware but it will cost you around $40 ($30 more than at the hardware store). If you are missing any of the plastic slide pieces for the side that moves (as I am), you are out of luck. Gen 2 patented those and took the patent with them (they will not alloy anyone to make their patented pieces). If any of you end up not using your crib and want to sell the plastic pieces, please contact me at I will buy them.

  • Anonymous Mar 02, 2009

    toddler bed with no hardware

  • Anonymous Mar 02, 2009

    toddler bed no hardware

  • Anonymous Mar 21, 2009

    have toddler bed, but no hardware. I'm off to the Home Depot - thanks!

  • Bonnie Lullo Mar 29, 2009

    I got the toddler bed from a friend and they could not find the hardware. I also tried to call, no luck. I looked them up on the net and had no luck there either. My product number is a little different tho. It's 84-8802. It's all wood. If anyone finds a contact number I would love to have it. Thanks!



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You should not attempt to buy hardware to reassemble the crib. Gen 2 has had recall problems with their products. One of the ways a recall is performed is to have the customer send the hardware to the company instead of the whole assembly, rendering it useless. If you received one without hardware, it was probably recalled.

Posted on Feb 09, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need an instruction manual for a toddler bed model # 31-8601 made by Generation 2 Worldwide, Llc. Where can I find this?

You need to contact the manufacturer and ask for technical support. You should also ask if the manual is available for download. If yes, ask for a link.

Jul 17, 2017 | Generation Baby Gear

1 Answer

Can I order replacement hardware to put the bed together? Ours was lost in a move.

It's hard to tell from your photograph, but I think that's a Delta Children's bed. If so, you can get extra or replacement hardware by calling them at: 1-800-377-3777 M-F 8:30am-6:00pm Eastern

Nov 18, 2015 | Disney Pixar Cars Toddler Bed

1 Answer

I have 2 Generation 2 Worldwide toddler beds that I need parts for.How can I find them?

Generation 2 went out of business. Most hardware stores will have the bolts you need
for these beds. The barrel nuts are available at Lowes too.

Mar 04, 2011 | Baby Gear

1 Answer

I was wondering what kined of scew s to have for a cars pixar toddler bed ?

The Delta site (the makers of this type of furniture do not have assembly instructions on your type of bed, but here is contact info for parts and service.
Delta™ Children's Products

- Corporate Headquarters
114 West 26th Street
8th Floor
New York, NY 10001
Toll free: 1-800-377-3777 begin_of_the_skype_highlighting 1-800-377-3777 end_of_the_skype_highlighting

Also on this site, are assembly instructions for cribs that may have the same type of hardware. Select one of the cribs mentioned and see the hardware you may need.
Another option is to remove a screw still in the bed, take it to your local hardware store and see if they can match it.
That is what I recommend.

Sep 27, 2010 | Disney Pixar Cars Toddler Bed

1 Answer

I need directions for putting together a crib by childesigns. The model name/number is Generation 2 worldwide 11-2108

Try Products America! They are the crib hardware specialist! They are open M-F 8 am -6 pm CST. Their contact numbers are 800-205-9642 or 800-772-1041. Maybe this will help!

May 19, 2010 | Childesigns Shelby Crib

1 Answer

I have a toddler bed by Jardine Enterprises. Model TB-08W. I need to find replacement screws and don't know where to look.

I just got a phone number for Jardine Enterprises 1-800-295-1980. Because that model is discontinued (I have the exact same bed and same problem) they will send you a list of the parts that are needed and you can go to a local hardware store and purchase the pieces. Hope that helps

Mar 19, 2009 | Baby Gear

1 Answer

Get the crib into a toddler bed Replacement parts, enter your model number and the manufacture year. The hidden hardware instructions will give you the steps to convert your crib to a toddler bed. Good luck!!

Feb 02, 2009 | Evenflo Jenny Lind Crib

9 Answers

Simplicity 4 in 1 Crib combo

Take the matress out and look in the envelope attached to the frame which should have your directions in it. If you didn't put them here, it is pretty simple. You have two options but you need to have the extra screws and parts that came with it to make the modification.
1) there is a 'day bed' option that requires two short pieces of wood for each end. Remove the front adjustable wall along with all the slider hardware. Make sure the bed is at the lowest point and screw the wood pieces into the holes directly above the bed frame spot and to the point under the bed with the metal spacers provided. (You need 2 long screws and 1 short screw and 1 wood piece per side to make the day bed option.
2) to use the back piece as a headboard, remove the back piece and replace the back right post of the drawer stand with extra board provided. Add the brackets and your purchased frame.

Oct 04, 2007 | Simplicity for Children 4-in-1 Convertible...

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

2,513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

149 Answers


Level 3 Expert

78919 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides