Question about RCA 32V430T 32" TV

1 Answer

I can't get the channel select to go to av input or video input

Using the channel up or down buttons will not allow the tv to go to an av input or video input. Using a universal remote and selecting the input button, the tv will still not go to video input. The tv only displays channels 2- 99. How do I get the tv to video so that I can use the rca inputs in the back of the tv?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,199 Answers

A universal remote in most cases can not switch this TV into the AV mode...you can but a orignal replacment remote for your TV At www.remotes.com and then you can use all the functions again!
That will fix ya!
Please rate my response!
Thank You!

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I watch a DVD with this tv. It seems like it is connected right but just showing static


Hi. By static, do you mean 'snow' image ? DVD players must be connected to AV inputs and selected as an AV signal, either by using the remote control, either using the local controls in the set itself. If you see, what you call static, means that your TV is on "a" channel without areal input. (antenna inputsignal).
You can use the local TV channel button (-), go all the way down below channel 1. There the AV inputs are located. Good luck.

Oct 13, 2014 | GE 27GT616 27" TV

1 Answer

I have a trutech tv model number plv1615 t I cannot find the manual I want to use it with my video player. Can you help


I'm assuming you have hooked up the video player and tried, and haven't got it to work? If so, Run the video cords to the correct places, i.e. yellow (video) to yellow port (front/back); white and red are sound, insert each to their corresponding places as well. Next, turn the tv on, as well as the video player, (dvd/vhs/etc) - next, if you have a remote use it to access the menu - then scroll through the list (usually with the volume up/down button, channel up/down buttons, or there will be arrow keys to use). Find in the menu the selection to choose which video port to use i.e., video 1, video 2, or AV, which is more commonly used - AV is usually the ports on the front side for tv's like this. If you do not have a remote, to access the menu (if not "menu" button is available on the front of tv) try using the channel up/down buttons on the tv, by pressing them both at the same time - also, using the channel up/down, or volume up/down buttons to scroll through the menu - to select, there will either be a "select" or "enter" button, or as one set of up/down buttons are used for scrolling, the other two up/down are used for selecting. Once you have determined the uses, find the channel selection, and try AV first. You may be able to find it easier first by simply flipping through the channels on the tv until it appears on the screen usually in the upper right hand corner in big letters -- AV. This will be the channel to use for video - if not, there is one other way to make this work - if the tv and video player have a co-axle port (cable cord connection) then use a co-axle cable. Plug it in to the back of the video player, and then the back of the tv. Select Channel three/four ( some video players have a switch on the back, so make sure they are both on the same channel). Most commonly used is channel 3.
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert @ Fixya.com

May 26, 2011 | Daewoo DTQ-19Z4SC 19" TV

1 Answer

How to switch to av rca input channel


hi melinda,
u can go to av input by simply pressing the VIDEO button on ur remote. when first time u press the first input may select. press again and again until u get desired input. normally rca input may be video 1 , or video 2 . first check which input are u using. select the same using remote. To return to tv mode just press TV button on the remote.
ok

Dec 13, 2010 | iLO 2600 Television

2 Answers

What channel do i use to use the DVI entry?


None, channels are only on the tv source entry. The DVI is just another AV entry, to use it you just select it from the other AV sources.

Jul 05, 2010 | Hitachi 51F500 51" Rear Projection...

1 Answer

Wii help


Hello :




1:Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console.
2:

Insert the RCA plugs on the Wii AV Cable into the input connectors on the TV. Plug the colored connectors into the following inputs:

Yellow = Video Input
White = Audio Input Left (or Mono)
Red = Audio Input Right

3:Once the cables are inserted and the Wii is powered on, you must find the Input Select for your TV to view the game (it is likely not going to be seen on Channel 3 or 4). Typically this is found by pressing the TV/Video button on the Television's front panel or remote control. If you have more than one input channel, keep pressing TV/Video until you see the display from the Wii.
If you do not have a TV/Video button, then the input could be labeled something different. Some other common input selects to look for on the TV or remote are: Input, Input Select, EXT, AUX, or a channel such as 00 or 99.

I hope this will help .

rate please !865b579.gif

Mar 23, 2010 | Nintendo Wii Console

1 Answer

Have inherited RCA television with AV input on back, but remote and using buttons on TV allow only channels 4 and 7 to be be seen. How do you make televsion recognize AV input from back? RCA model F20600...


Bring up your video menu, make sure the cable/antenna mode is set correctly. Also do channel search/ auto program. If your AV is operating a DVD player etc., there should be a button to switch from TV to AV. If you are trying to input Cable/Antenna to AV jack you may have it plugged into wrong jack, it should go into 'antenna/cable in' jack. Hope this helps.

Nov 08, 2009 | Televison & Video

2 Answers

How can i get my bush tv onto av without using the remote as it is broken.


Hi, welcome to Fixya solutions, please post the exact make and model # and we'll see if we can find out how to navigate to the video inputs. Usually you can channel down below 02 and get to the AV inputs, or if there is a menu button on the from use the ch and vol buttons to navigate within the menu.

Aug 03, 2009 | Televison & Video

1 Answer

Input channel with no remote


You should be able to select the AV input with an Input or Menu button on the front of the TV.  If there are no arrow keys the Channel and Volume buttons may provide up-down-left-right action.

May 28, 2009 | ESA ET427E 27" TV

1 Answer

Can hook up my wii to this tv


The AV Multi Out plug that is included with the Wii will allow you to connect the console to most televisions or video cassette recorders (VCR). First, look at the back of your television AND your VCR and see if you have colored holes label "Input". Though most TVs have them, almost all VCRs do as well.
avinputsdiagram.gif
  • Audio/Video (AV) inputs are located on the front or back of the TV or VCR.
  • They are smooth silver posts with the inside showing a color, usually red, white and yellow.
  • Look for inputs marked Audio and Video IN.
  • The image on the left features stereo audio inputs. Some televisions have only one audio input. Click here for help setting up a mono audio connection.
  • Do NOT connect your system to anything marked OUT.
Where do you have these inputs?
Additional Options:



Connecting to a Television
  1. Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console. setuptvav.gif


  2. Insert the RCA plugs on the Wii AV Cable into the input connectors on the TV. Plug the colored connectors into the following inputs:

    Yellow = Video Input
    White = Audio Input Left (or Mono)
    Red = Audio Input Right
    Interested in playing your games in Dolby Pro Logic II (simulated surround sound)? Click here setup information.

  3. Once the cables are inserted and the Wii is powered on, you must find the Input Select for your TV to view the game (it is likely not going to be seen on Channel 3 or 4). Typically this is found by pressing the TV/Video button on the Television's front panel or remote control. If you have more than one input channel, keep pressing TV/Video until you see the display from the Wii.
    If you do not have a TV/Video button, then the input could be labeled something different. Some other common input selects to look for on the TV or remote are: Input, Input Select, EXT, AUX, or a channel such as 00 or 99.
    Still can't find it? We have compiled a list of known input selects for many popular brands. Click here to see our list.


    Go to Next Step (Set Up of the Wii Remote) >



Connecting to a VCR, DVD-R, Cable Box, etc.
    In order to connect a video game system through a device such as a VCR, DVR, cable or satelite box, it must have Video and Audio "inputs." While most VCRs and VCR/DVD combos have these inputs, other devices typically have "Outputs" which will not work for playing your Wii console. Please verify the device you are attempting to use has these holes.
    While many cable/satelite boxes and DVRs may have "inputs," accessing them can be difficult. Please consult the instruction manual for the device you are connecting to, for more information.
  1. Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console. setupvcrav.gif


  2. Insert the RCA plugs on the Wii AV Cable into the input connectors on the VCR. Make sure you are plugging the connectors into the holes labeled"Input" or "In". Holes labeled"Output" or "Out" will not work. Plug the colored connectors into the following inputs:

    Yellow = Video Input
    White = Audio Input Left (or Mono)
    Red = Audio Input Right
    Interested in playing your games in Dolby Pro Logic II (simulated surround sound)? Click here setup information.

  3. Once the cables are inserted and the Wii is powered on, put your TV on the channel you use to watch movies (usually channel 3 or 4). Put in a video tape and play the movie. When you see the movie playing, press stop (do not power off the VCR!) and proceed to the next step.

  4. You will now need to find the Input Select for your VCR. This is usually a button on the original remote control that is labeled Input Select, AUX, Input, EXT, Line In, or a high or low channel. For more information on locating your input select, click here.

    Go to Next Step (Set Up of the Wii Remote) >












Nov 26, 2008 | Video Game Consoles & Games

1 Answer

DVP334V cant connect to my LCD TV


  1. Connect the video cable to the players VIDEO (CVBS) OUT (yellow) jack and to the TV's VIDEO IN jack.
  2. Connect the audio cable to the players 'AUDIO LEFT' (white) and 'RIGHT' (red) output and the TV's 'AUDIO LEFT/RIGHT' input jacks.
  3. After it is hooked up, you will need to select the TV’s video input channel that corresponds to the jacks connecting the player to the TV.
    • Press STANDBY-ON to turn on the player.
    • Turn ON the TV.
      Note: Video Input selection varies for different brands/models of TVs. Consult the user manual or manufacturer or your TV if none of the below is successful.
      • Press channel 2 on your TV. Then press the channel down button to locate the video input channel. (This channel is usually located between the lowest and highest TV channels.)
        OR
      • For some TVs, there may be a button on the TV’s remote control that accesses the video input channel labeled SOURCE, AV or SELECT.
        OR
      • Select the Video Input Channel from the TV’s on-screen menu system.
Composite Video Connection. (Example Only)
051104165152_4352.jpg Attachments
    No attachment available.

Dec 25, 2007 | Philips DVP3340V

Not finding what you are looking for?
RCA 32V430T 32" TV Logo

Related Topics:

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71055 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2272 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...