Question about Conair WW42 glass precision electronic WeightWatchers scale

Open Question

How do I calibrate the ww42 scale?

The scale is reading 4/10 of a pound heavy

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Error message ErrL

My scale had the same problem.  I replaced the battery, but still got the same message.  My wife noticed that one of the feet on the bottom of the scale was loose.  The feet are twisted on to the scale and held by two small flanges.  When I gently pulled the loose foot away I noticed that a small black wire had broke.  I used my fingernails to remove a small bit of the wiring cover and twisted the ends back together.  I then hide the wires back in a recessed area on the foot and placed it back on the scale.  Worked just like the day I got it.   Hope this helps!

Posted on Feb 20, 2009

  • 1 Answer

SOURCE: Taylor 5599 Tempered Glass Body Fat-Body Water

when I weight it appears error4 what does it mean?

Posted on Jul 29, 2009

  • 1 Answer

SOURCE: How do I change the scale to read pounds instead

Turn over the scale, on the bottom, there should be a little black switch that you can use to select between lbs and kilograms.

Posted on Jan 03, 2010

  • 1 Answer

SOURCE: I am looking for a calibration guide for a Triner 1870x-fb

I found a manual that has calibration instructions for this scale.

Posted on Apr 11, 2010

blueextc3221
  • 15935 Answers

SOURCE: Tanita BD-590 calibration

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is my scale calibrated. When I turn it on it first shows 8888 7/8, then it 0/0g


Take a ten pound bag of sugar and calibrate the scale to read 10 pounds.

Oct 30, 2014 | Salter 3007 Aquatronic Digital Scale

1 Answer

I am looking for a calibration guide for a Triner 1870x-fb


I found a manual that has calibration instructions for this scale.

Apr 10, 2010 | Scales & Body Fat Analyzers

1 Answer

I can't get the scales to read in pounds


Turn the scale over and there is a sliding button that allows you to choose pounds of kilograms. Joe

please rate my answer as very helpful. Joe

Mar 30, 2010 | Omron HBF-400 Fat Loss Monitor with Scale

1 Answer

How do I change the scale to read pounds instead of kilograms?


Turn over the scale, on the bottom, there should be a little black switch that you can use to select between lbs and kilograms.

Oct 25, 2009 | Taylor 5599 440 Pound Tempered Glass Body...

4 Answers

How to calibrate a Pelouze model 4010 scale with a


from http://sites.dymo.com/Search/Pages/SupportSearchResults.aspx?k=4010%20calibration&start1=0

4010 CALIBRATION (newer models) released 12/8/95
1. Press and hold the ZERO and lb/kg keys simultaneously.
2. Press and release the ON key while still holding the ZERO and lb/kg keys.
3. Continue holding down both keys until display shows CALB.
4. Press ZERO to reset and apply 130 pounds to the platform
- display shows a count which must be greater than 500.
5. After the count stablizes press the lb/kg key to save this value.
- display now shows END.
6. Press OFF to turn scale off

Calibration instructions for Older Model 4010 (with a date code of 5103 or older)
1. You will need 3 – 50 lb weights to calibrate this scale
2. Turn off scale
3. Press and hold the LB/KG and the ZERO button simultaneously and
continue to hold till instructed in step 5
4. Press and release the ON button
5. The unit will display a number. Release the LB/KG and ZERO buttons. You
will see a number on screen. Press the ZERO button and you will see C50
6. Place the 50 lb weight on the scale and press ZERO. You should see C100
7. Place another 50 lb weight on the scale (total 100 lb) and press ZERO. You
should see C150.
8. Place the remaining 50 lb weight on the scale (total 150 lb) and push ZERO
9. You will see a final message (end) and the scale should shut off
Your scale should now be recalibrated

Jul 08, 2009 | RTO Pelouze Scale With Remote Display -...

1 Answer

Tanita BD-590 calibration


Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

May 11, 2009 | Tanita BD-590 Digital Baby Scale, 40 lb x...

1 Answer

Error message ErrL


My scale had the same problem.  I replaced the battery, but still got the same message.  My wife noticed that one of the feet on the bottom of the scale was loose.  The feet are twisted on to the scale and held by two small flanges.  When I gently pulled the loose foot away I noticed that a small black wire had broke.  I used my fingernails to remove a small bit of the wiring cover and twisted the ends back together.  I then hide the wires back in a recessed area on the foot and placed it back on the scale.  Worked just like the day I got it.   Hope this helps!

Jan 28, 2009 | Conair Weight Watchers Glass Digital Body...

1 Answer

Scale not accurate


This link allows you to trouble shoot directly with the company... I hope this helps. http://www.taylorusa.com/advantage/root/contact.html

Nov 10, 2008 | Taylor 7321 400 Pound Lithium Scale

Not finding what you are looking for?
Conair WW42 glass precision electronic WeightWatchers scale Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Conair Scales & Body Fat Analyzers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Danny Kuhlmann

Level 3 Expert

1442 Answers

Are you a Conair Scale and Body Fat Analyzer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...