Question about LG WM1814CW Front Load Washer

1 Answer

Cloths Soaked after Spin Cycle

I have a Maytag Washer Model:MAV2757AWW. I just replaced the Drive belt because the cloths were dripping wet after the spin cycle.
The machine spins but not fast enough to decently dry the cloths. They are dripping wet after spin cycle. Also I noticed the agitator is going back and forth during the spin cycle. TIA

Posted by on

  • fl_dolphin Jan 17, 2009

    How do I get it into second gear ?

  • Anonymous Mar 19, 2014

    washer finished cycle and displayed de code but had spun clothes, now won't start a new program even when empty, still displaying de code

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 68 Answers

If the motor has a transmission, it could be stuck in 1st gear. I think the agitator running is normal.

Posted on Jan 17, 2009

  • cheapiephp Jan 17, 2009

    If it's stuck in 1st gear, it could be a stuck or disconnected solenoid on or near the transmission. If you find one, see if it moves.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need manual for maytag washing machine model As11


probably needs a belt. pull the washer from the wall and tilt it back against the wall, make sure it is stable. then look under and find the belt and replaced from a local vendor.

Jan 02, 2012 | Maytag VRSCDX Night Rod Special Washing...

1 Answer

Cloths are wet after spin cycle


ceck for kinks in the drain hose .if you have a wet vacuum try sucking on the drain hose, or fallow the drain hose into the back of the unit to see if there is a blockage or a belt off .. jay florida

Nov 23, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Cloths still very wet after final spin cycle


Use spin ccyle again for proper operation and to help remove water.

Apr 29, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag model MAV208DAWW washer, clothes still damp to wet after spin cycle. DIYer, want to try to fix it myself.


excellent love a guy willing to try
ok wet cloths
with this model i would the first thing to check is the height of your drain,,,, if the drain ios highter than 6 feet the unit just cant do it
next check your belt, this sometimes becomes stretched, more than 1/2 deflection id change it

Oct 25, 2009 | Maytag Legacy MAV208DAWW Top Load Washer

1 Answer

Need help please with washer machine,wont spin my cloths,just drn


a belt has snapped or came off or the motor and brushes are damaged.

Sep 20, 2009 | Maytag MTW5700TQ Top Load Washer

1 Answer

Maytag top loader on final spin cycle leaves the clothes soaked


how much water is in the bottom of the tub and is it louder than normal if so could be small droplets of water leaking from tub seal if not the pump is restricted by something and req replacement

Aug 20, 2009 | Maytag Washing Machines

1 Answer

Maytag washer


check to make sure the door is locking when it should. If the door isn't locking or sensing that its locked the washer will not go into high speed spin.

Mar 31, 2009 | Maytag Neptune MLG2000A Front Load Stacked...

1 Answer

Cloths are still very wet after spin cycle


This sounds like a belt issue. A belt will become weak and stretch or glaze over time. Both of these conditions will cause a slow spin.
The belts are located on the bottom and are relatively easy to replace. Go to: www.repairclinic.com for info on removal and installation. You can even order a new belt from them.

Mar 14, 2009 | Maytag MAV2755A Top Load Washer

1 Answer

Spin cycle is slow, cloths still extremely wet after spinning


problems with spin cycle could be due to variable reasons.components involved are the lid switch, timer control and the motor.The clothes might be soaked because there could be a drain problem.check whether the drain is clear for partial blockage.also inspect the water pump.

Dec 13, 2008 | GE WWSE5240G

Not finding what you are looking for?
LG WM1814CW Front Load Washer Logo

1,615 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...