Question about Bosch Classixx WFL 2462 Front Load Washer

2 Answers

Bosch Classixx WFL 2462 Front Load Washer

My washer works fine apart from that it does not drain. After the washing cycle it does not drain any of the water away and i have to manually empty the water out of the washing machine, and the clothes are soaking wet.

What can i do?

I will thank you in advace for your help.

Many thanks

Posted by on

  • justme50 Jan 21, 2009

    Thank you for your help. The problem is now sorted.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 3,463 Answers

Remove plastic panel at front bottom of washer, there you will see the filter, unscrew it anti clockwise to remove and clean, replace and tighten up clockwise.
Plz rate my solution.
Thanks.

Posted on Jan 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This solution was perfect! I found the drain area, and the filter was clogged with 2 pens, various clothing tags, and a bunch of other stuff - cleared this all out and replaced plug, in less than 5 minutes, was good to go!

Posted on Jan 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch WFL 2462 is out of balance during spin cycle


I would think it unlikely that the springs have failed unless they are fractured.It's more likely to be the shock absorber or absorbers. Depress the drum and watch how it settles, if it continues to 'bounce' around its the absorber(s), if it settles after one bounce then it's something else.
Make sure it's levelled ok
regards
w

Nov 02, 2011 | Bosch Classixx WFL 2462 Front Load Washer

1 Answer

I have a classixx 1200 WFL2463GB/12 and it keeps bolwing the fusebox in my house.My dad seems to think that it must be the element as it does not happen as soon as I turn the machine on.I then put it on...


I would suspect that it is the element, as if it were the motor, then it would not have done a rinse cycle.
Disconnect the element and try it again, if it does not blow, then this proves it is the element.

Feb 02, 2011 | Bosch Classixx WFL 2462 Front Load Washer

1 Answer

My bosch classixx 1400 express washing machine has become very noisy when draining water, it never used to be. Any ideas?


If it is only noisy when draining the water, then could be something stuck in pump.
There should be a filter located at the bottom front right of washer behind a cover.
Unscrew anti-clockwise to remove and clean, and look inside the pump opening as well to see if anything is stuck there.

Apr 13, 2010 | Bosch Classixx WFL 2462 Front Load Washer

2 Answers

Bosch wfl 2450


Just fixed the same problem - new brushes on ebay were only £5. Fitting the brushes was fiddly and easiest if you take the motor off, which was easy to do (just 2 bolts).

Jun 01, 2008 | Bosch Classixx WFL 2462 Front Load Washer

1 Answer

Bosch WFL 2462


Your exit hose behind the machine has to go over a certain height before it goes into your wall standpipe or sink. The height is marked behind your machine, approx 3 feet above ground level. The hose should put about 3 or 4 inches into the standpipe, & not fitted airtight.

Possible u didnt connect well after your pump job or ........

May 02, 2008 | Bosch Classixx WFL 2462 Front Load Washer

Not finding what you are looking for?
Bosch Classixx WFL 2462 Front Load Washer Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...