Question about Toshiba Satellite Pro P300 Notebook

2 Answers

Laptop mouse stopped workig ??

Can you please help .the mouse on our laptop has stopped working,we have connected a hand held mouse but would like to get back to useing our laptop mouse .thankyou .

Posted by on

  • stebro10 Jan 16, 2009

    hi chris did what you asked but no joy ,im quite new to this computer thing lol.what it was ,we were trying to play a dvd thru the laptop on to the tv ,i pressed the f n button along with several others ,the lap top then froze briefly then the mouse stopped working i dont really want to press all the buttons again incase i make matters worse can you plz help thick person out lol ,steve

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Hi,

You could try downloading and installing the touchpad driver again:

driver_touchpad_synaptics_27121B.exe

Then reboot and go to Control Panel > Mouse, and Enable it in there, and check the Hardware Device Tab also.

Hope this helps

Chris (ziraffa)

ps I got the driver file from here.

Posted on Jan 16, 2009

  • chris grams
    chris grams Jan 17, 2009

    Yeah, Ekse has the right advice there.. The Fn + F-key shortcut is handy because you don't have a mouse to work with. If you are still uncomfortable with enabling it that way, use can use the Tab and arrow and Enter keys to navigate to the configuration also.
    Good Luck!

    Chris (ziraffa)


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 13,433 Answers

In your case it maybe that the mouse is disabled, this is done with a function key, FN and one of the F1- F12 keys.

make sure the mouse is not disabled.

if this doesn't solve the issue.
it may possibly be:

  1. Software issue.
  2. cut cable.
  3. broken touchpad.
  4. issue between the touchpad and motherboard.
  5. faulty motherboard..

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Breadmaker stopped working


Dear CUSTOMER PLEASE DOWNLODE THIS MODEL DRIVER & REINSTALL & RESTART AFTER WORKIG FINE.

Mar 02, 2012 | Acer Aspire 5920-6335 Laptop

1 Answer

I use a hand held mouse. How do I disable the finger mouse


If by 'finger mouse' you mean the touch pad then yes you can enable or disable it as you wish.

For Acer Aspire models you need to press and hold the 'Fn' button and then press the 'F7' button (It has blue square on it with a hand over it).

Repeat the process to enable the touch pad.

Jun 13, 2010 | Acer Aspire 5500 5570-2609 Laptop

2 Answers

I have a Compaq Presario CQ60 scroll touchpad stop working


Hi,

The notebook model you have is shipped with the Synaptics touchpad driver. Please follow the below steps to enable scrolling features:

1. Open Control panel -> click on Mouse . It will display Mouse Properties dialog box.
2. Under Mouse properties Window click the Device Settings tab
3. Click on Device Settings -> Settings button. This will display the Properties for Synaptics TouchPad on PS/2 port.

4. Follow the steps below to enable the Tapping Feature :

Highlight Tapping in the Left hand side , and Check the Enable tapping in the Right hand box .

5. Follow the steps below to enable Scroll feature:

Highlight Virtual Scrolling in the Left hand side and Check both the boxes in the right hand side.
6. Click OK .
Alternatively you can anble scrolling by reinstalling touchpad driver.

Touchpad driver for Vista:

ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39534.exe

Touchpad driver for Windows 7:

ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe

Mar 09, 2010 | Compaq Presario CQ60-220US PC Laptop

1 Answer

MX600 Logitech laser cordless mouse, left button stops working


Just found a temporary solution (fixes the immediate problem, but it does return):

Turned the mouse off held down both buttons, turned it on, let go of both buttons. When you let go, it works again.

Jul 02, 2009 | Logitech MX 600 097855036162

1 Answer

Logitech cordess mouse stopped workig


Have you pressed the re establish contact buttons on the underneath of the mouse and the receiver unit .
They sometimes just dont boot properly and forget who they should be talking to .. repressing these buttons usually re establishes conntact and they work again , another cause may be dust on laser reciever on mouse clean with a small paint brush (dry ) and this also sometimes cures problem especially with erratic movement ....... regards Vortash

May 12, 2009 | Logitech Cordless Mouse

2 Answers

Mouse stopped working, but appears ok, batteries ok, can't determine problem


Is the batteries good. If so try,

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Jun 08, 2008 | Logitech Wheel Mouse Optical

2 Answers

Wireless mouse for laptop


Make sure the batteries are good.
Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch.
Hope this helps you. Bud

Nov 25, 2007 | Computers & Internet

1 Answer

Mouse problem.


Does your onboard mouse still work? This will help point me in the correct direction for your fix.....accordianman

Nov 18, 2007 | Labtec Optical PS2 911544-0914 Mouse

Not finding what you are looking for?
Toshiba Satellite Pro P300 Notebook Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18343 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...