Question about Canon PIXMA iP1600 Printer

2 Answers

Waste ink absorber near full PIXMA MP130

How do I fix this...I read the answers for the iP1600, but don't know if that will fix the MP130

Posted by on

  • Delited4u Feb 11, 2009

    Every time I print I have to push the blinking button in order for my printer to work again. It tells me that my waste ink absorber is almost full.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Canon Master
  • 525 Answers

To reset waste ink counter:
Press Menu-Scan-Copy-Scan to enter service menu.
Use arrow keys to scroll to "Service menu counter access".
Press OK.
Use arrow keys to scroll to "ABS-M DOT COUNT"
Press Copy.
Use arrow keys to reset count to zero.
Press OK.
Press Stop/Reset.


OR


turn on the printer press menu
press scan, copy, scan to enter service mode
use> to get to nvram
set ABS-M level to 0
Set ABS-P level to 0
Press stop to exit..........Done

i hope this help

Posted on Jan 15, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,692 Answers

Take paper towel and absorb the excess ink from the tray, including  cleaning of the electricial contacts that she excess ink in tray.

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

On the charge 2 I asked how to set the correct time your response was first to press the menu where is the menu?


YOUR Question wasn't answered. You are reading a RELATED QUESTION, and these may or not apply to you. The are offered automatically as possibly being of use.

This is that post.

http://www.fixya.com/support/t25941222-change_time_phone_power_max_5_8

Jan 10, 2017 | The Office Equipment & Supplies

1 Answer

My Canon PIXMA MX700 is not turning on! I have checked all the cords even moved from one outlet to another and its still not turning on. Should I just purchase an new one this model is an old on


Do you have a CD to install this printer? if you do go into MY COMPUTER where you can erase things and erase the printer and its system then shut computer off and restart then reinstall the printer using your CD to reinstall it. Some times you have to delete things and reinstall them to work.

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

2x^3-3x (a) state whether the polynomial is a monomial,binomial, trinomial, or none of these. (b) state whether it is in descending or ascending order. provide a reasons for your answer


a) It is a 3rd degree binomial because there are only 2 terms.

b) It is in descending order because the degree of each term goes down as you read the expression from left to right

May 23, 2014 | Office Equipment & Supplies

1 Answer

Why is print quality poor after inserting new ink. Copies are faint and have lines


the cartridge is clogged with ink that has dried and reduced the slit. you need to replace the cartridge with a new one. it happens usually if you recharge the cartridge 3 or 4 times with compatible ink.

May 07, 2014 | Office Equipment & Supplies

1 Answer

Riddles with answer


Like, -300c near absolute zero. You\'re talking a space walk here.

Apr 09, 2014 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

1 Answer

Canon pixma mx 922 will not scan


This happen due to poor version of drivers.Make sure that you install latest drivers. If you don't have then download it from PIXMA MX922 Canon Software Driver
For more help or guidance check Canon MX922 Manual English

Jul 28, 2013 | Office Equipment & Supplies

1 Answer

I don't know to to program my avery berkel ix 202 help


This is your machine here.

https://www.cashregisterstore.com/pdf/IX-100-202.pdf

It has the contact details for Avery Berkel. Ask them to send you a PDF copy of the instruction manual or ask their service desk how to program.

They provide one here

http://www.averyberkel.com/media/IX_User_76103-831-05.pdf

Or you can download this one, also free

http://www.armaghpos.com/images/stories/Avery_Scale_Manuals/avery_berkel_ix100_scale_label_printer_om.pdf

Or buy one here.

https://the-checkout-tech.com/manuals/scales/Avery_Berkel_IX-110_and_IX-202_and_IX-212_user_guide_manual.html



avery berkel ix 202 Google Search

Mar 10, 2012 | Office Equipment & Supplies

2 Answers

Just bought and tried to load my Swingline Smart Touch low force stapler. Don't know how to get it opened


I have one of these models. Just push the gray lock mechanism at the end of the stapler and the loading magazine will pop out. The chrome plated magazine opens towrds the front....it slides forward and backwards.

Jun 17, 2011 | Office Equipment & Supplies

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA iP1600 Printer Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98879 Answers

old marine
old marine

Level 3 Expert

1573 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...