Question about Toys

2 Answers

Tyco RC NSECT - won't fire the bullets

Bought a used Tyco RC NSECT (Blue, 49 MHz)  Everything on it works - except the bullets won't fire. The round piece that you load the bullets into does life up like it's going to fire but instead of firing it makes a very loud ''clicking/snapping'' sound. Any help we could get would be GREATLY appreciated Thank you!

Posted by on

  • Anonymous Feb 17, 2009

    i have same problem

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I took the gun apart and found that there is a piston in a tube, controlled by a gear, that pushes air through a small hole in the end of the tube. Our tube cracked and fell apart where the piston reaches it's limit. Ours was so bad that it broke the tube and the green outer casing to the gun. I've been looking for the part, but I can't seem to find it. Maybe I'll try making one.

Posted on Sep 19, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have same problem too!

Posted on Dec 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do i add water in a melroe m600


check that you can open the rear of the unit, pins on one side and hinges on the other . This reveals the radiator and allows certain access to the motor.

Jan 25, 2015 | HTW Skidhoe Boom Skid Steer Bobcat Loader...

1 Answer

I need a 12 V adapter for my LED house,


12V DC adapter can be bought from most of the electronic spare part selling shops. http://electronicshelponline.blogspot.com/

Dec 14, 2014 | Toys

1 Answer

I have a baby Sinclair his voice box does not work anymore where would I get a new one or how to fix it?


No replacement are available, if it's battery powered clean the battery contracts and it might fix it

Nov 14, 2014 | Toys

1 Answer

Zoomerpup stopped working


Try removing the battery ONLY for about 5mins. Then reinsert the battery and see if it powers on.
If that fails, remove the battery AND Media Card for 5mins. Reinsert battery first...power on. Then SD card.
If neither of those work, check charger to see if it is working. If there is an LED light on the actual charger, this should light up. If there isn't, then the charger should at least be warm after say, 30mins of charging. If it is still cold, you may need to replace the charger.

Nov 25, 2013 | Toys

1 Answer

My RC snowmobile has a broken ski axle and the track is broke in two.


buy a new ski axle and track...
Lokks like you were having TOO MUCH fun with her!

Mar 24, 2013 | Toys

1 Answer

How to repair the motor in a Dept. 56 Village Animated Skating Pond?


first check the plug 4 a fuse LOOK CLOSE ! next with a volt meter start by checking the switch for power, you will need to go deeper into the unit to find out what 4 sure failed.. I would make the nephew fix it he broke it .. you can let him watch but you might be working with 115 volts and safety must be taken ! .. hope you get it giong .. jay the pump guy in longwood fl

Jan 05, 2012 | Toys

27 Answers

I have a geotrax train that is not responding to its remote. I put brand new batteries in it and it still does not work. The remote makes the noise and the red light lights up on top of the train. Is there...


I had the same problem with two of our three engines. I read somewhere that you can get them running by hitting the side of the engine against a hard surface. I can't believe it... IT WORKED! I guess the motor gets **** and hitting it will get it going. All three engines are working now.

Dec 01, 2010 | Fisher Price Geotrax Remote Control Train ...

Not finding what you are looking for?
Toys Logo

Related Topics:

498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

100304 Answers

yadayada
yadayada

Level 3 Expert

66302 Answers

ray gallant

Level 3 Expert

39565 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...