Question about Barcode Scanners

1 Answer

HP3670 scanner has out of date drive. How do I fix this?

Apparently it hasn't been updated to my Windows XP and ai'm told I need to change the drive but don't know how.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers


Try going here first:

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Compaq Presario Desktop Computer SR1150NX. I've added a new WD SATA 1 Terabite HD. but the system does not recognize it. I updated the Bio's but see no way to activate the SATA ports. The...

The problem is that XPinstallation CD does not have a SATA driver, unless you have a SATA drive on adisk etc. and can install the driver when XP asks for a hard drive driver then,XP cannot detect the hard disk and therefore won't install XP. The FIX. Go into the BIOS anddisable the SATA drive (enable IDE emulation), this will make XP think it is aIDE/PATA hard disk. Then you can install XP normally. When Windows hasbeen installed then install all the device drivers (including the SATA driver),then shut down and boot up and got into the BIOS and enable the SATA drive.

Aug 11, 2011 | Barcode Scanners

1 Answer

My transcend 4gb pendrive, JF V10 is not working at all. my pc dtects the drive, but i cant open it. "please insert disk into drive" - pops out. 0 bytes is shown when i view the properties....

Right click on my computer , left click manage , click storage - disk management
in the top section of the window see if you can see your pendrive .. if you can then check the drive letter it was assigned , then check if one of your other drives hasn't already being assigned that letter , if so right click ont the pendrive in disk management console - select change drive letter and paths..... -
select a another letter for the device - one that hasn't been used yet

reply if u were unsuccessful


May 27, 2011 | Barcode Scanners

1 Answer

I need to go into BIOS and config my computer to boot from hard drive I have windows XP and already know that at Startup I need to press del or F1 to enter BIOS once ai am there how do I change to boot...


To change the booting order of your computer you need to press + and - to select desired booting source.

Please don't forget to rate! Thanks!

Apr 02, 2011 | Barcode Scanners

1 Answer


Well, the timing is interesting. If you noticed the problems only after installing the updates, I'd remove the updates and see if that fixes things. To remove Windows updates, there are two ways to do this:
1) Add / Remove Programs: Use the Add / Remove Programs tool in the Control Panel to remove the updates. Open it, and make sure the "Show Updates" box is checked (it's located in the upper right of the tool). Scan through the list and see if you can find the updates you've mentioned below. Remove them if you see them. Reboot and see if you still have the problem. If you don't find the updates listed here, you'll have to use the second option below.
2) In your Windows XP Start Menu, go to All Programs, point to Accessories, point to System Tools, and then click System Restore. The System Restore tool will start. Use that to restore your PC to a previous date - you should be able to select to restore to a time before those updates were installed. The tool will allow you to pick from certain times you can restore to. Pick the date and time that's just before you installed the updates. Click for more information on the System Restore tool.
If neither of these fix the issue or remove the updates, then the problem is not something I can easily troubleshoot over email. There may be anything from hardware problems to network problems to CPU and process problems. To continue the troubleshooting, you'd be best off showing your PC to a local computer geek.

Mar 07, 2011 | HP Barcode Scanners

1 Answer

I can not find the driver for this USB mass storage device

What is the device exactly as most USB flash / thumb drives dont actually need a driver from windows xp upward.

If it is some other device then make and model would be a great start.

If it is just a flash drive then it will appear as another drive in explorer once windows has installed the driver.

If NOT then you should start by doing any updates for you computer as a first off then ensure you have the latest motherboard INF packs installed too as I have seen flash drives fail when the hardware drivers for the motherboard are not installed

Jan 27, 2011 | Barcode Scanners

1 Answer

I want this video drivers

Barcode Scanner Imager & Reader - AIS Ltd Ireland ... 2 min - 20 Feb 2009 - Uploaded by AISLTDIreland
AIS Ltd are Ireland's leading supplier and Integrator of Fixed, Mobile and handheld barcode scanners, readers and imagers 1D ... - Related videos

Oct 25, 2010 | Barcode Scanners

1 Answer

O/S: Windows Vista Ultimate (x64) Service Pack 2 (build 6002) Issues with: TSSTcorp CDDVDW SH-S202J ATA Device [CD-ROM drive] On bootup, my listed cd-rom drive automatically ejects. once it ejects, if...

Have you tried removing the cables from the drive and refitting them.
If it still does it, you probably have a faulty eject mechanism.
A new drive is less then £15

Sep 22, 2010 | Barcode Scanners

4 Answers

My HP Pavilion ZE4900 (windows XP/32 bit) won't boot up past the startup screen. I do NOT have the recovery disk so how do I go on about fixing this problem. Full details to my problem is right here:...

I would suggest you to open up the CPU unit, clean the RAM (Memory) with nail polish remover or thinner.
Change the slot of the RAM.
Then Start the computer and boot up with the CD that u said is available on the other website.
I am sure the computer should boot up and once it is booted up just repair the Windows.
If you do not repair the Windows then it may create the problem when next time you start up.
Strange but some solutions are always on side ways... I am giving you this solution as i have solved this problem on my own computer.


Jul 30, 2010 | Barcode Scanners

2 Answers

CIPHERLAB 1000 (serial ) Driver for WinXP

you dont`t have a driver for serial hyper terminal on com port where is the a code and you wilkl see the numbers on the screen.If you want to work with some windows programs change that barcode for usb or ps/2 variant.

Jan 15, 2008 | CIPHERLAB 1000 Handheld Barcode Scanner

Not finding what you are looking for?
Barcode Scanners Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barcode Scanners Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barcode Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides