can I listen to a TV program through my receiver?
I only see where I can listen to movies via DVD's or VCR
Anybody every listen to a regular TV program through their VSX-454?
If your tv has output jacks! red/white/ you can get a set of audio cables and run them to the red/white audio input on the back of your amp in either the tape input or any other free input you have on the back of the amp,Then just use the input selector to select that input and there you go!
Please rate my response
Thank You!
center channel not working. unplugged one of the other speakers and the center channel would work....
(More)
center channel not working. unplugged one of the other speakers and the center channel would work. This is independant of sub woofer problem of blowing fuses. This unit has not been moved of abused.
I have my Sky TV & DVD sound through a VSX 454, and I get an "out of sync" or a...
(More)
I have my Sky TV & DVD sound through a VSX 454, and I get an "out of sync" or a slight delay between the sound and the picture on the TV. If I turn the sound down on the TV & listen to the stereo the picture and sound are out of sync. Sky & the DVD play fine just using the TV sound. I don't have a manual for the 454, so hoping someone might know what to try. Thanks.
Bought new Denon receiver. Hooked up main speakers to speaker A and 3 sets of small speakers...
(More)
Bought new Denon receiver. Hooked up main speakers to speaker A and 3 sets of small speakers (outside, living room and dining room (in wall) to speaker B. I use a splitter for the 3 speakers on B. The sound on A speakers is much louder than those on B switch. Anything I can do to equalize the sound for both A and B speakers. Had same problem with my old receiver which had total of 300 watts. The Denon has 570 watts.
I need a diagram for hook up.
tv, vcr, dvd, satelite, ps2 please.
pioneer is not helpful. VSX-452...
(More)
I need a diagram for hook up.
tv, vcr, dvd, satelite, ps2 please.
pioneer is not helpful. VSX-452 a/v receiver is what I am trying to run everything through.
thanks
Ryan