Question about Tecnik TKL9260 Front Load Washer

1 Answer

Washer keeps stopping during any cycle

My Whirlpool Ultimate Care II washing machine keeps stops workng during cycles. When it stops I can hear a humming noise, if I press in the control nob and then wait awhile and pull it back out the washer will start running again but only for short periods of time, never finishing a full cycle. It happens during any and all cycle at any point. What migh be wrong and is it worth fixing or having fixed?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

The humming noise could be from two sources and it is worth while doing a few simple checks first the drain pump is jammed with a foreign object. check nothing caught in the impellor second water not available - check taps turned on. also turn water off, undo fill hoses, put in a bucket and turn water back on try on drain or spin programs to check water drainage as well

Posted on Jun 19, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Ultimate Care II Washer will not drain


bad lid switch,open the lid a few inches and close it down,if you do this a few times and don't hear a clicking sound the switch is bad.
http://www.youtube.com/watch?v=PZAbg9uftos

Jun 05, 2012 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired


Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Will not spin on any rinse cycle


Hi, This washer does not have a belt. While the washer is agitating, if you lift the lid will it stop? Some models will agitate but not spin if the lid is up. It sounds to me like the lid switch might be going bad.
If you will get me a model #, I can look this up for you and give you a better idea.

Vic

Jul 05, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Machine stops during rinse cycle


Hi, Does your machine stop in a certain cycle or is it random? There is about three posibilities.

May 11, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Ultimate Care II keeps taking water.


ck your drain nose/drainline, chances are you have along hose, perhaps even draining along the floor behind hte unit, into a "closed" drain system. in which cawee the wwater is syphoning out during the rinse cycle, youlll needt o raise the drain hose to above 48" and have it drain into a stand pipe to prevent siphoning effect

Nov 19, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer will not Spin during SPIN CYCLES


Thanks for the question If your washer sorta spins and washes ok, your problem is with the transmissionTHanks for your question THe Appliance doc

Jul 29, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer won't start spin cycle


sounds like a lid assy issue, can you hear a "clicking" just before the lid is closed, try opening nad closing a few times listening for a distinct "click" if not the machine doesnt think the door is closed and for safety reasons wont spin and drain.

Mar 16, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool ultimate care II stops during cycle


THe most likely cause for this is either the lid switch or the timer itself sticking.

Sep 14, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Tecnik TKL9260 Front Load Washer Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tecnik Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Tecnik Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...