Question about Belkin (F5D7633UK4A) Wireless Router

1 Answer

The wep code

I hav the instillation cd but i dont know how to ket the wep code off it!can you help me!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

You can usually erase WEP keys off of a wireless router by doing a full reset. This usually involves holding the reset button for up to a minute and turning the router on and off. The method varies from router to router.

You can sometimes find this information in the user manual. If you post the model of the router I may be able to tell you what you need to do to reset it.

Posted on Jan 16, 2009

  • vibilo Jan 16, 2009

    I really need to learn to check above the title for these things...



    Anyway, all Belkin routers have a button on them somewhere (usually the back) that will set them back to factory settings. You need to hold this down for at least 10 seconds. This should reset everything including encryption. Keep in mind this will also reset things like port forwarding.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cant find wep key


You will need to access the router (via its local web address using a suitable web browser) Once you have provided the login information, surf to the wireless security section and either document the WEP key (if not encrypted) or change it. Understand that changing the WEP key will invalidate any else's access, so be sure to share the change. The WEP key may have to be done in HEX, meaning that it must be done with the numerals 0-9 and ONLY the letters A-F. The ket must also be a specific length, usually 13 or 26 characters depending on the requirements of the router.

Aug 11, 2011 | NetGear WGR614 Wireless Router

1 Answer

I HAVE A RANGEMAX WIRELESS ROUTER BUT I DONT REMEMBER THE ASSWORD I UT ON THE ROUTER AND I DONT HAVE THE CD SO I COULD INSTALL IT AGAIN IS THERE A DIFRENT WAY I COULD INSTALL IT?


Yes. Are you referring to the WEP password which you use to connect to the wireless? If you are referring to WEP you can reset it by logging into the router through the admin panel with the admin login details(assuming you have them) and then chnage or reset the WEP password. If you are dont have access to the ADMIN console and also the WEP then you have to reset the router to its default settings. But before doing that please make sure you know all the settings with which the router needs to be configured with.

Apr 12, 2010 | NetGear RangeMax WPN824 Wireless Router

3 Answers

Connecting a ps3 and i need the wep key


your wep key should be on the equiptment like the router on the bottom if not, make a new wep key if u have a pc go in to the settings of the router enable wireless and add ur own wep key or is the wep already on a pc and ur connecting to it from ur console then input manualy i dont know if wireless is anygood for a ps but try wired see if that is more helpfull

Sep 27, 2009 | Westell Wirespeed VersaLink...

2 Answers

Connecting my ps3 to a philips router , what is a wep key??


WEP key is actually the network security key for ur wireless network,,if u have any computer which is online through the router u can find out the wep key.double click on the wireless icon on the online computer and u will find a box with 2 tabs,,click on the support tab at the top and u will find an option called default gateway,,preferably 192.168.1.254{preferably like this},,put this ip address in the address bar at the top and hit enter,,a box will come up with username and passwrd,,u hav to ask ur internet service provider for tat information and then after u get into the 2wire page u will find a option called wireless security,there u will find ur wep key,,or else if u look at the bottom panel of the 2wire u night find a 10 digit number which is the default wep key for 2wire netwrk,,best of luck, keep me posted

May 14, 2009 | 2wire 2700HG-B Router (2700HGB)

2 Answers

I have a d-link router (dont remember the model #) and I cant remember my WEP code - I've looked up help online and everyone says to go to the admin interface - but that does NOTHING! It doesn't show you...


To reset your router, use the following steps:
  1. Press the reset button for 10 seconds. You can use a small object, such as a paper clip to hold down the button.
  2. Do not power off the unit while the router is being reset.
    The unit should now reboot, and once the WLAN light stops blinking the router should be reset.
  3. Open up your Web browser and enter 192.168.0.1 in the address bar.
  4. For the login, enter admin as the ID and leave the password blank.
  5. The reset button is just to the right of where the power cord plugs in to the router.
  6. Remember this resets everything so don't forget to set up your secure network again!

May 10, 2009 | D-Link AirPlus DI-524 Wireless Router

2 Answers

Need wep code how do i get a reminder


http://www.nirsoft.net/utils/wireless_key.html

There is a download link at the bottom of the page-
This is a nice program i ran across a few months ago.

Apr 09, 2009 | NetGear WGR614 Wireless Router

1 Answer

I'm trying to connect my router (2wire) to my Xbox360 but don't know my WEP code.


goto the routers web interface via a connected pc at http://192.168.0.1
and read the wep setting from the wireless configuration page
make sure you dont change the settings as everything else will fail

Jul 14, 2008 | 2wire 2700HG-B Router (2700HGB)

1 Answer

I lost the instillation CD and need the wep code


The WEP code is whatever you make it when you set up the wireless connection. If you have lost this key. It is best to use the manual reset located on your wireless router. Will require a small point like a paperclip. Then you will have to access the router and set up the wireless internet over again. Then you can secure it with a new WEP key.
If you need further assistance please ask me.
Thanks,
Lee

Jun 17, 2008 | Belkin (F5D7633UK4A) Wireless Router

Not finding what you are looking for?
Belkin (F5D7633UK4A) Wireless Router Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...