Question about RCA TruFlat 27F520T 27" TV

1 Answer

Getting remote to control the menu

It was working fine.now when you go to menu you can't get the remote to control the picture,sound,preferences,time,or set-up.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm not really sure why it's doing that...are you sure the remote has working batteries? I know that's a dumb question, but some times it happens. I just checked my remote and I have pretty much the same tv as you. Maybe you're just not operating the remote correctly. Click on the menu button, use the channel up and down buttons to scroll up and down. Once you got to something you'd like to change, click on "ok" to the right. To adjust sound, time, date, setup stuff, just experiment with it. You either use the up and down channel buttons or the left and right volume controls. Once you're done, click on ok. If you want to go back, press menu again. Hope it helps.

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn on cc without remote control?


Unfortunately, you can't reach the CC (Caption Vision) sub menu without a remote control. You need to find another RM-Y121 remote or a Universal remote that supports the Menu feature of the original remote. (Some universal remotes do not include a Menu button. Avoid those cheaper models. You may have to search all Sony TV codes to get the needed button to work.)

A replacement original remote is available from EMT Company at http://www.emtcompany.com/sony-rm-y121-remote-control/101317789.html . The remote costs ~$12. Amazon has a vendor with a used version of the remote.

I wish that I had better news for you.

Cindy Wells

Sep 19, 2015 | Sony KV-32V16 TV

1 Answer

How to set menu w/o a remote


If your TV has no Menu button on its front panel controls, you can't do this. You must have its remote control to select this settings.

May 13, 2012 | Fisher PC-25S00 TV

1 Answer

None of the video inputs are working but the audio is fine.


Hello
You just make all vidieo input options to factory setting and try.
To get it follow this.

Press the MENU button.
The main menu appears

Surf through and select the Video Menu

To select the Vodeo Menu DISPLAY==>HILIGHT==>SEELCT
To restore factory settings :- Press reset on the remote control while the Vido Menu is selected. To restore each Mode to factory settings press reset after selecting the mode to be reset.
OK

Dec 09, 2010 | Sony KP-48V90 TV

1 Answer

I was given a Sharp 27N-S100 27" TV. Everything's fine but I don't have the remote control or user manual. I would like to get to the menu screen for the tv. How can I do this. Its hooked up to a cable box...


On the front of the TV you should be able to press both channel up and down at the same time and it will give you access to the TV menu. Once in the menu use the channel and volume up and down buttons to navigate.

Good luck....

Jan 13, 2010 | Sharp 27N-S100 27" TV

1 Answer

The guide menu keeps popping up and it loses the remote programing. I cleared it out once by pressing several buttons, including the power and mute button simultaneously until I gained remote control...


You have bad switches inside the tv. When a switch gets stuck nothing else will work including the remote. In other words, the microprocessor can take only one command at a time. Replace all the switches at one time to avoid trouble later.

Oct 13, 2009 | RCA Standard (CRT) Televisions

1 Answer

Do i need the original remote control?


yes a new remote is needed if the option of a panel menu is not there.on yyour tv get the model number and make order from manufacture

May 14, 2009 | Orion1934 19" TV

1 Answer

Remote will not change the volume


Is the front funtion button works in the TV the it could be a bad remote controller(the button switch inside) :)

Apr 14, 2009 | Hitachi 43FDX01B TV

1 Answer

Unable to access menu with remote control


you cannot enter into menu on most universal remote only on off switch,channel change and volume up and down thats the most you can get out of a universal remote.you will need the originald remote.

Mar 04, 2009 | Emerson Standard (CRT) Televisions

1 Answer

Zenith B27A11Z 27" TV, can't get into menu, original remote gone


Most universal or multi-brand remotes will control a TV's basic functions, but almost none will support advanced functions like menus. If the TV doesn't have a front panel menu button, the best solution is to buy a universal remote of the same brand as the TV. If you get a Zenith universal remote, it should have a menu button that will work with the TV.

Dec 14, 2008 | Zenith B27A11Z 27" TV

2 Answers

Zenith wont tune channels


You must get a proper replacement remote control, once you can access the menu and find you cannot store above 13, place another post and i will help you further.

Oct 11, 2007 | Sony FD Trinitron WEGA KV-21CL10 21" TV

Not finding what you are looking for?
RCA TruFlat  27F520T 27" TV Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...