Question about Logitech Harmony 670 Advanced Universal Remote with LCD Screen

6 Answers

Cannot program the Remote to work with my Cable box

I have tried to program my remote using the online connection. I have follwed the instructions, but the remote won't work on changing channels or displaying the on screen menu and guide for my Charter Cable.

I have a HD Cable Box (Motorola DCH6200) connected to a Sony HDTV (KDL37XBR6).

The power button works, but none of the other features on the remote respond.

Did I waste my money or can this be fixed?

Posted by on

  • mdz8840 Jan 21, 2009

    Thanks Bunnydawg for the response. I have the manual and I have had no success. I was hoping for a little more than read the manual.

×

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Try using auto program, as already suggested , if that does not work, then there is no way to have this remote working on this set.

Posted on Jan 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 378 Answers

1. Turn on the device that you wish to control.
2. Point the remote at the device and hold down the Code Search button.
3. Hold down the button [on the remote] which corresponds with the device to be programmed. Release when the LED blinks 3 consecutive times.
4. Enter one device code at a time. Press Power to test whether or not the code works. If the device powers off, you have the correct device code.

for more detailed instructions click the link below http://5thirtyone.com/archives/851

thank u for using fixya.

Posted on Jan 21, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

With this remote if not all features are not working, you can try first to reset the settings iof it and reprogram it again using the software that is installed on your computer and make sure that the computer that you're using to program the remote has internet access so it can update its data base for all the codes and controls for your devices there that will be using the remote...

Posted on Jan 21, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Welcome to Fixya! There are a Lot of these Remotes out there and Half will not work for the Products that you own. This remote will not work with your Setup. Pioneer Makes a Universal Remote That is all But Guaranteed to work with all Major Brands. Got one for my System and it covers ALL. This may be the Route that you need to go.

Posted on Jan 16, 2009

  • Travis Humphries
    Travis Humphries Jan 21, 2009

    If it will only Control the Power and not the Rest, It will not work on that Model of Unit. Very Complicated to even get to that point But, Once you do and the Power is the Only thing that will work You should find another Remote.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

Please provide me model number of your remote.

Posted on Jan 16, 2009

  • rockfixya
    rockfixya Jan 16, 2009

    is the remote is sky remote or another?

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

I presume you have the manual... try other codes by manually programming it.

Robert

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i program my remote to my conway corp cable box,it dont say what brand the cable box is.


Troubleshooting How do I program my remote control?
This video will provide you with general instructions to program your remote. Click on your remote control below for detailed written instructions including programming codes specific to your television.

- See more at: https://www.conwaycorp.com/troubleshooting-faqs#sthash.EyWKnxUr.dpuf

Jul 13, 2015 | Remote Controls

1 Answer

How do i program cybertec q-x33e remote on sharp aqous tv


The instructions for this are on the Internet .

Jan 18, 2015 | Sharp Remote Controls

2 Answers

Need instructions for programming LG remote control model # 6710T00017E to control my cable box


go to download WWW.fitness.manualsonline.com or www.remotecodelist.com

God bless you

Jun 10, 2012 | Remote Controls

1 Answer

TRYING TO PROGRAM WITH MY MOTOROLA CABLE BOX


If I understand correctly you are trying to program your Samsung remote to your cable receiver. Well, I will first give a few troubleshooting steps to do on the remote that are important before you do anything else, if you have yet to do these steps.

1. Has the remote worked on this cable box before and/or does it function the any other devices?

2. Try "New" batteries

3. Does the remote supplied with the cable box work?

4. Perform a IR (infrared) test on the remote, here is a link to show a IR that is transmitting properly.
If there is no light from the IR, then you have a bad remote, replace it.

5. Call your cable/satellite provider for the codes and steps to program it, they may have this information posted on their website so check there before you call them.

I hope this helps

Mar 11, 2011 | Samsung BN59-00455A Remote Control

1 Answer

How do i program this remote to my time warner cable box


Time Warner is most likely made by another company and they are not listed on the programming documentation. You can try looking online to see who makes your Time Warner box. You should be able to program the manufacture off of the program list. The universal code for this remote is 8107 and 8108 which may work as well. To program the remote press set and the light next to set will start flashing. Press the desired component button ex(TV , VCR, CBL, DVD). Next enter the code 8107 and press ENTER. The set light should no longer be flashing. If 8107 does not work try 8108 using the above info.

Feb 06, 2010 | Sony RMV210 Remote Control

1 Answer

Programming RCA converter box remote control with Phil/Mag TV---


Good day,
You should have the instruction guide. If not look below. It's there but look closely for the guide itself and how to increase it's size to readable.

Check on the back of the TV to see if there is a 3 and 4 setting, If so, set to 3.
With nothing connected to the tv, and using the tv's remote, scan for channels. It should come up with only channel 3.
Then using the remote with advanced options, set the the input to either antenna or auto.

Connect the antenna cable to input on the converter box. Using the supplied cable connect the output from the converter box to
the TV. Turn the TV on first, followed by the converter box.
Then follow the instructions.

Not really easy so you'll have to fight your way thru it.
Finding the right setting for the antenna will probably take the most time, requiring a station scan after each adjustment.

http://dtvconverterboxes.blogspot.com/2009/05/rca-dta800b1-owners-manual.html

Dec 28, 2009 | RCA Remote Controls

1 Answer

Zenith mbr3447 code for magnavox converter box?


To download the full code list with the instructions on how to program go to link below:
http://www.replacementremotes.com/store/productdetailp.cfm?productid=61978&reset=1
if your none of the codes work for you cable box then your SOL. try programming your cable box remote for your tv instread.

Jan 15, 2009 | Zenith MBR3447 Remote Control

20 Answers

Remote codes for RCA Digital TV Converter Box (DTA800B1)


I was just looking for them and then found my manual and felt bad for you guys so I scanned it and uploaded it to photobucket ^^ please feel free to save the remote codes but you may have to zoom in alot to see them ^^
http://i37.photobucket.com/albums/e83/Megumi_Kurama/Scan007December152008.jpg
http://i37.photobucket.com/albums/e83/Megumi_Kurama/Scan006December152008.jpg

Sep 16, 2008 | Remote Controls

18 Answers

Universal remote code for digital converter


The code for a Magnavox Converter *Analog to Digital* to a Philips Universal Remote is 0759

Mar 21, 2008 | Remote Controls

4 Answers

Find Code for Motorola Cable Box which Works for the Innovage Jumbo Remote Control


Had the same problem with my Jumbo Remote - found the code under the "General Instruments" list (051 for me). Also noticed that my cable box has a sticker on the front with a serial number starting with "GI," most likely more evidence of the General Instruments conection. Able to get all the functions to work: guide, menu, etc. Good luck!! - JQ

Dec 21, 2007 | Remote Controls

Not finding what you are looking for?
Logitech Harmony 670 Advanced Universal Remote with LCD Screen Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Remote Controls Experts

bill tarkulich

Level 1 Expert

33 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

netbot

Level 1 Expert

2 Answers

Are you a Logitech Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...