Question about Numark Fusion 494 Complete DJ Package

1 Answer

One cd player stopped working have no manual

One of the cd players on this DJ mixer has stopped working, I have no manual to have a look to see if there is something I have done wrong

Posted by on

  • wal152 Feb 12, 2009

    I have the same problem. It just stopped reading cds and comes up with no disc. It was making some weird noises before it stopped working. I opened up the table and everything looks normal, no broken/loose parts so I'm guessing its just the cd drive that has gone bad. Where can I get a replacement?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Are you getting any sort of errors on the display. When you say it stopped working, what is it doing or not doing exactly?

If it's the CD tray - very common - it will have to be replaced by a professional.

- OPTiC
DJ Equipment Repair Videos
DJ Equipment Repair
DJ Equipment Sales
Numark Parts

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ION Discover DJ mixer "Scratch/Search" switch


plug in the turntable first, then start the program.
if all lights are lit try again .
hope it helps

Dec 24, 2010 | ION Audio Discover Dj Turntable

1 Answer

What do i do with the earth cable on my technics to stop the humming?


If you are connecting it directly to a HiFi amplifier, connect the ground lead of the technics to the ground termination on the back of the amplifier.
If you are connecting to a Dj Mixer, connect the Technics ground lead to the ground on the back of the Dj Mixer.
Make sure the ground is connected securely and will not fall off. To check this, after connection give a light pull on the ground cable. If the lead comes away, reterminate (connect).

Nov 09, 2009 | Technics SL-1210 Turntable

1 Answer

My power cord was pulled out while still on.


Are you talking about a Numark DXM mixer? If so, why would you say you have an issue with a CDJ-800? Numark Parts can be found here.

If not, you need to be more specific as to who makes your mixer.


- OPTiC

Pioneer DJ Repair Videos
Pioneer DJ Repair
Pioneer DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Mar 10, 2009 | Pioneer CDJ-800 Turntable

3 Answers

Error e-8709


I don't understand what you mean by "plug electricity from the speaker to my CD desk"?

Could you clarify this.

The E-8709 error states you have an issue with the cd transport or CD eject mechanism. You would need to take it to a service center to get it checked out.

- OPTiC

Pioneer DJ Repair Videos
Pioneer DJ Repair
Pioneer DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Mar 09, 2009 | Pioneer CDJ-800MK2 Turntable

1 Answer

Player jumps back to previous track for no reason


Have you tried cleaning the lens out? Invest in a good quality CD cleaner. IF this does not solve your problem, then you more than likely have damage to the reader, and will need to be replaced.

The part can be found here: PIONEER CDJ PART


- OPTiC

Pioneer DJ Repair Videos
Pioneer DJ Repair
Pioneer DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Feb 14, 2009 | Pioneer CDJ-800 Turntable

1 Answer

Connect turntables(technics SL1210MK5) to a mixer?


None. The cables are already attached to the turntable. They are hard wired to the unit. The red & White cable. Just connect to the PHONO INPUT on your DJ MIXER, and connect the thin ground wire to the GROUND terminal on the mixer. That's it your ready to go.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.

Dec 17, 2008 | Technics SL-1200MK2 Turntable

2 Answers

Home stereo audio problems


Could be a bad patch cord, a setting on the mixer, a faulty mixer (unless it works ok with other amps), or a dirty control on the Sony amp if it has analog controls. Have you tried connecting other sources to the Sony?

Sep 27, 2008 | Turntables

1 Answer

Numark cd mix 2


Well, it's not that hard to set up. What do you need help with? If you want to know how to connect:

1) The CD units go into the back of the mixer - in the CD / LINE INPUT - Left side on CD / LINE INPUT 1 and Right side to CD / LINE INPUT 2

The output of the mixer - MASTER OUT - goes to the INPUT of your stereo, amplifier, or receiver's LINE INPUT connection.

That's it. Press PLAY on your CD players, and raise the faders/volumes, and your all ready to go.


- TWEAK AV LAB

Nov 30, 2007 | Numark Fusion 494 Complete DJ Package

1 Answer

Turntable problem


You will need a phono preamp. Ipods, radios and cd players all give out a LINE level signal..which means you can plug headphones or speakers, adjust volume and be set. A turntable needs a phono preamp. Usually a dj mixer or stereo receiver with a phono input is all that is needed. A simple phono pre amp is like $20 from radio shack.

keep me posted.

Oct 25, 2007 | Gemini XL-500 Turntable

Not finding what you are looking for?
Numark Fusion 494 Complete DJ Package Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Numark Turntables Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Numark Turntable Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...