Question about RCA 32V430T 32" TV

1 Answer

Set is dead

32v434tyx6 rca model.set will not turn on.the red light blinks on front panel then stops and stays lit.i hear a click when it is pluged in.would appreciate some ideas and a schematic on it .thanks jim

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace the Horizontal Output transistor and High-Voltage Transformer.
Set will come on, if it goes back off,solder around the switch mode power supply even if it looks good.

Carlos
NMHS Health Services Audio Visual Department

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a remote control


Hello
Buy one PHILIPS CL 034 Universal Remote Control. RCA is listed it its codes.
Codes are:

0704 0002 0406 0007 0011

................. 0611 0811 0312 0514 0720

................. 0102 0502 0601 0817 0917

................. 0835 0901 0103 0803 0211
................. 0912 0114 0519 0320 0420

Direct Code Entry

1. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

2. Press and release the desired Mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4 digit code from the code

tables. Note: after a valid code entry,

the red indicator turns off. For an

invalid code, the red indicator

flashes.

4. With your device on, press

CHANNEL UP. If the device

responds, no further programming is

required. Note: If some buttons do

not operate your device, try one of
the other codes for your brand.
Switch OFF and switch ON your TV WITH ITS FRONT PANEL POWER CONTROL SWITCH EACH TIME BEFORE TRYING AN OTHER CODE.
OK.

Feb 25, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

I can't get my universal remote programmed for my RCA tv model # F25648. Do you have any sugestions?


Hello

Three digit universal remote codes for RCA are:-
002 021 011 102 211 302 312 318 320 406 409 411 420 502 511
514 519 601 702 711 719 809 811 901 909 911 912 914
000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194
Four digit universal remote code for RCA are:-
0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
NB: Switch OFF and switch ON your TV with its front panel power control switch each time [NOT WITH REMOTE CONTROL HANDSET], before trying an other code.
OK.

Jan 06, 2011 | RCA F25648 25" TV

1 Answer

Front panel locked by accident- no original remote, only universal, code unknown. tv has since been turned off by unplugging, now it won't turn on. remote has also been unprogrammed because batteries were...


Hello

Three digit universal remote code for RCA are:-

000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194

Four digit universal remote code for RCA are:-

0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Other ways to unlock RCA tvs
  1. Hold down MENU on the remote and VOLUME DOWN on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 on the remote and the VOLUME DOWN buttons on the TV its self at the same time for at least 4 seconds. The set won

Nov 22, 2010 | RCA 27R410T 27" TV

1 Answer

Need code for rca tv


Hello
You just try one amoung the folloing four digit codes

{ 0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188 }

Proceedings

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
*******************************************************************************************************************
If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
*******************************************************************************************************************

Oct 23, 2010 | RCA F31317 31" TV

2 Answers

Need code for Innovage jumbo universal remote for a rca tv


The Innovage Jumbo users manual lists over two dozen RCA TV remote codes. They are:

000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191, & 194.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
If you can't be bothered to enter each of those codes one at a time, you might consider the auto-search function.

To have the remote try each TV code it knows one at a time, follow these steps:
  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the TV turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.
I hope that helps.

Sep 17, 2009 | RCA TruFlat 27F520T 27" TV

1 Answer

Tv powers on but light just blinks and no picture or volume


A blinking power light would indicate a problem on the chassis board located inside the tv. Possibly a failed flyback or other electronic component. Its not cost effective to repair when you can invest in new tv for the same cost as repairing the defective tv. I should also mentioned the danger of dyi troubleshooting of the components inside the tv. I do not recommend unless you are familiar with properly discharging the tube to avoid electrical shock.

Jul 25, 2009 | RCA F32650 32" TV

1 Answer

Tv no pic or sound


If you hear the high voltage try to come up and set shuts down in 2 secs it could be your FBT also these sets have alot of poor connections chassis should be resolder.

Apr 06, 2008 | Standard (CRT) Televisions

1 Answer

32v434t 32 inch tv.


32V434TYX6.......Transformer = 271996 or ASTI 3754....
I wouldn't mess with the EEprom........................T.

Apr 06, 2008 | Standard (CRT) Televisions

1 Answer

TV wont turn on and blank screen & no sound


this unit is dead ,possoble power supply problem. you must have warranty on this unit if its only 8 months old,if not contact place of purchase and ask wath is the life expectancy of their products and your tv set it start them thinking about repairing or replacing.

Aug 22, 2007 | RCA F27650 27" TV

1 Answer

Sony 27"TV will not turn on


The picture tube on your tv is dead, you need to replace it. It probably will be worthing just purchasing a new set, because the cost of repairing it will be close to the purchase of a new one.

Apr 07, 2007 | Sony KV-27FV16 TV

Not finding what you are looking for?
RCA 32V430T 32" TV Logo

Related Topics:

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...