Question about Polaroid FLM-3225 32 in. LCD Television

1 Answer

Status light just flashes red and will not turn on

Watching TV when all of a sudden the TV shut off and the status like started flashing red and now the TV will not turn on.

Posted by on

  • alesiar Mar 06, 2009

    standby light flashes red and will not turn on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Firstly, unplug your tv for at least 4 hours. Over night is better. This is what we call a Hard or Master Reset.
This should solve your problem. If by chance it doesn't, then more than likely your power supply board is shot.
Very common in the newer tv's

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RED FLASHING STATUS LIGHT


Possible lamp failure but lamp light not status should blink-I have suggestions but want you to try the self check first--if set has been unplugged plug it up and turn on and when it fails:

Mitsubishi TVtroubleshooting
Here's something that might also be useful. After you turn on the set, and getthe regular red blinky lights, hold down the Device and Menu buttons togetherfor about 5 seconds.
The Power light will start to flash in a two digit sequence.
For example, 3 flashes, then 7 flashes = 37.
Here are the error codes, and the corresponding problem:
12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filtercover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cablebetween FMT and Engine disconnected

Jun 11, 2012 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Tv shuts down shortly after start up. and status light flashes red


If it is the light labeled status and it is flashing and it is red, then a fan is stopped.

Sep 28, 2009 | Mitsubishi WD-65735 Television

1 Answer

55" TV keeps shutting off automatically


Green light flashes 5 and then red light flashes 6

Sep 14, 2009 | Sony KDF-E55A20 55 in. LCD Television

1 Answer

When powered on, automatically shuts off with red flashing light.


you can claim the repair on your home insurance policy as FUSION

Sep 13, 2009 | JVC AV-27920 27" TV

1 Answer

When I was watching the tv it suddenly started to flash off and on and then finally will not even turn on


Watching tv all of a sudden loud buzz noise,I shut off unit turned back on loud buzz came back about 30 seconds later loud pop pop then smoke came out of top of unit, i'm not please as this unit i bought about 17 months ago @ Canadian Tire Belleville & warranty is now not covered, pobably will never buy another Proscan product but am more concerned there could be a fire caused buy this than getting unit replaced

Apr 23, 2009 | Proscan 19LA20Q LCD TV

1 Answer

Sony LCD 52 inch


This sound like you are having problems with the power supply board. Since you are getting a momentary picture and sound the fuses are good but TVs today have "shorts" and "overvoltage" circuitry build in that will shut it down on errors. Someone knowledgeable in electronics will have to isolate the exact cause.

Dec 05, 2008 | Samsung LN-S2641D 26 in. LCD HDTV

1 Answer

Tv won't turn on, keeps flashing red, will not turn a solid color


Sounds like the lamp needs to be replaced.

Before any repair or replacement, unplug the tv from the electricity for an hour, plug it in. This forces a system reset on the tv and may solve the problem. More likely you need a new lamp.

Aug 17, 2008 | Panasonic PT-50LC14 50" Rear Projection...

Not finding what you are looking for?
Polaroid FLM-3225 32 in. LCD Television Logo

496 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

72601 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...