Question about Logitech QuickCam Express Web Camera

1 Answer

2 files are missing

After i download the imagestudio 7.3.0 I can't see on the camera at all. It says that is unplagged. since then whenever i turn on my computer is says that the file lvcm.sys on usb logitech is missing, and the file LVUSBSta.sys. what is going on?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cd drive was misplaced


1st You download Webcam Driver.
driver for my camera After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Ezonics Camera Drivers for Windows XP Vista Windows 7

Dec 06, 2011 | Ezonics CobraCam Webcam

1 Answer

I have a quickcam 9.02 and I have a problem of compatibility. Windows 7 how I fixed my problem


Assuming that you actually have the "Communicate STX" camera (I don't know where you came up with the "9.02" identifier from), go to the product information page for this camera and click the "Downloads" tab.
From there, click the "Choose OS" drop-down to select "Windows 7", then select whether you are running 32-bit or 64-bit Windows 7.
From there, read the information provided and then click the "Download Software" button.
You software will begin to download to your computer.
Once the EXE file is download, open it and follow the installation instructions.

Dec 29, 2010 | Logitech QuickCam Communicate STX Personal...

1 Answer

I have Toshiba laptop with built in camera, but whenever i try to open the camera i recieve an error message 'CEC_Main.exe' reinstall. Kindly help how do i go about.


You also have Kasperkey ?
The error message 'CEC-MAIN.exe' is connected with the Camera Assistant Software,
You are unable to run the camera software because your KIS (Kasperkey Internet Security is blocking it by keeping "CEC-MAIN.exe" in the 'Untrusted File'.

Resolution:-

1) Launch your web browser

2) In the Notification Area (Down by your clock - Right click on the KIS icon and select "Pause Protection" > select "Resume manually"

3) In Notification Area: click on KIS icon elect "Applications under Control"

4) In the "Applications under Control" menu relocate "CEC-MAIN.exe" from the "Untrusted File" to the "Trusted File" - click "OK"

5) > Start > All Programs > CEC-MAIN icon to run your web camera program
Or My computer >> Local Disk (C) >> Program Files >> Camera Assistant Software Folder >> CEC-MAIN icon
Your webcam should now be running
Worth putting a shortcut on your Desktop at this stage .

6) With the webcam still running, then In notification Area - Right click on the KIS icon and select "Resume Protection"

7) Check the "CEC-MAIN.exe" in "Applications under Control" and confirm it is still in the "Trusted File"

8) Restart your computer

Aug 19, 2010 | Webcams

1 Answer

How can i install my web camera w/out cd drive?


1. driver are needed to install your web camera which are found online.
2. You will need to go to the "device manager. go to the "update" tab and update drivers
3. the prompt window will ask you for either a location or the install disk ... select location where you downloaded the drivers.
Hope this helps
If any steps missing you can find out how either on Microsoft.com or your help files on your computer under the start menu or orb on Windows 7

Jan 02, 2010 | A4tech Viewcam PK335 Webcam

1 Answer

V-UA1 P35U3 driver


You can use either QuickCam 6.0.1 (get it here) or ImageStudio 7.3.0 (get it here). This camera is not supported in Vista.

Nov 16, 2009 | Logitech Webcam

1 Answer

I have my web cam and the brand name is micro innovations, but my problem is that i lost my cd installer. Can you help me how to install this cam?


Hello.
I found a site that has drivers for this camera.
Please be aware that whenever you download anything make sure you scan the file with an antivirus program before opening downloaded file.

Here is the link.
http://drivers-download-center.org/drivers-download-keyboards/micro-innovations/index_41.html

Thank you
Please rate me

Jan 27, 2009 | Micro Innovations MCNIC50C Webcam

1 Answer

Logitech/clicksmart510


You can download it HERE. Just select your OS and download. You just need to download ImageStudio, and not the desktop messenger.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 23, 2008 | Logitech Webcam

1 Answer

Quickcam


Error 2711
When receiving the 2711 error during Logitech QuickCam/Image Studio software installation, please perform the following steps:
  1. Use Add/Remove programs in the Control Panel to uninstall any current installation of QuickCam/ImageStudio software. For Microsoft Windows 95, 98, ME or NT
    1. Click Start, Settings, then Control Panel.
    2. Double click the icon labeled Add/Remove Programs.
    3. Highlight the desired program in the list provided (QuickCam or ImageStudio).
    4. Click Add/Remove Programs located in the bottom right of the list provided.
    For Microsoft Windows 2000 or XP
    1. Click Start. followed by Control Panel.
    2. Double click the icon labeled Add/Remove Programs.
    3. Highlight the desired program in the list provided (QuickCam or ImageStudio).
    4. Click the button labeled Remove located in the bottom right of the program selected.
  2. Navigate to C:\Program Files\Logitech.
    1. Double click the icon on the desktop labeled My Computer.
    2. Double click the icon labeled C:\(computer name).
    3. Double click the yellow folder labeled Program Files.
    4. Double click the yellow folder labeled Logitech.
  3. Delete any folders for QuickCam/ImageStudio.
    1. Select the yellow folder with the QuickCam or ImageStudio names.
    2. Click the menu options for File, followed by Delete.
    3. Repeat for any other QuickCam/ImageStudio folders.
  4. Delete all files located in the Windows temporary directory C:\Windows\Temp or C:\WinNT\Temp
    1. Double click the icon on the desktop labeled My Computer.
    2. Double click the icon labeled C:\(computer name).
    3. Double click the yellow folder labeled Windows or WinNT.
    4. Double click the yellow folder labeled Temp.
    5. On the menu across the top of the window, click Edit followed by Select All.
    6. On the menu across the top of the window, click File followed by Delete.
    7. Click OK.
  5. Reinstall QuickCam/ImageStudio
    1. Remove and reinsert the QuickCam/ImageStudio CD and follow the prompts OR
    2. Double click on the downloaded ImagStudio file.

Dec 27, 2007 | Logitech QuickCam Express Web Camera

Not finding what you are looking for?
Logitech QuickCam Express Web Camera Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts

gaucherre

Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1423 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...