Question about Televison & Video

1 Answer

Ethernet not reconized

First thankyou for your response, I added some additional info on the history of the comp. in short it is homemade so i cannot go to manu. for driver software. (i did not build comp.) any more suggestions would be great

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 190 Answers

First there are 3 ways ethernet controllers are put into computers. On the mainboard, a plug in card, or USB. I am guessing that you are not using the USB.

First, pull the side cover off of the tower. If the network adapter is a part of the mainboard look at the model number on the mainboard and look it up through an internet search on another computer. Go to the manufacturers website and download the correct driver for your particular adapter. If the ethernet is a plug in card, you can remove it and look up the drivers by looking at the model on the card the same as described above. When you have downloaded the correct driver put it on a disc or a flash drive and then transfer it to the other computer then get that computer working and on the net again then finish downloading any other drivers or updates.


Another option is to purchase and install a new card, get hooked up to the internet then download whatever drivers you need for the rest of the mainboard by looking up the model number like above and then downloading and installing the correct drivers.

Just a suggestion. Since your doing all of this work, create a new folder on the desktop. Create sub-folders for each device you need a driver for (note: the display adapter may not seem to be installed incorrectly but make sure to install the manufacturers drivers not the generic Windows driver). When you find the downloads click on "save" instead of "run" when you download the drivers and download them to a sub-folder in the folder on the desktop. Put them into the subfolder for each of the drivers like "display" "Modem" etc. This way you will know what each driver was in case the download name doesnt indicate what each driver is for. Next you can save them to a flash drive or cd/dvd so if you ever have to reload again you dont have to find the drivers again. Let me know if you have a question. Hope this helps.

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Identifying Your Schwinn Airdyne


How To Identify the Model of a Schwinn Airdyne Exercise Bike

  • We'd like to share some characteristics of the Schwinn Airdyne bikes that can be used to help you identify the model of your Airdyne bike.

What size/type fan does it have? Is it a spoke fan like a bicycle wheel or short wide blade fan?

Does your Airdyne bike have two chains or a chain and a belt?

  • AD3, AD4 bikes have two chains.
  • AD Pro/Comp and AD Evolution Pro/Comp bikes have a chain and a belt.

How do the crank arms attach to the Airdyne, by wedge pin or bolt?

  • AD3, AD4 and certain AD Pro/Comp crank arms attach by wedge pin.
  • Certain AD Pro/Comp bikes have crank arms that attach by bolt.
  • AD Evolution Pro/Comp bikes have crank arms that attach by bolt.

How To Identify the Model of Schwinn Airdyne Bike

on Mar 11, 2015 | Schwinn Original Airdyne

Tip

How to add Additional Account Info Property in ADS


Download and Install Additional Account Info in ADS 1. Download acctinfo in zip format [from the link below] or click here.
2. Copy acctinfo.dll to the %systemroot%\system32 folder
3. Register the service and dll with this command:
regsvr32 acctinfo (Similar to registering the schema snap-in)
4. Close, then open Active Directory Users and Computers.
5. Look for an extra tab called Additional Account Info.
Thats it!

on Mar 14, 2009 | Microsoft Windows Vista Ultimate Edition

1 Answer

Where do I find my history button for my apple Ipad tablet


Ok so on Safari, you can see your search bar up the top, to the right there should be a little picture of a book, then a picture of a cloud, then a addition sign. The picture of the book is History/bookmarks. If you click on it and it says bookmarks, just click the button in the top left of that menu to back out of there and then it should show 2 things that say either Favourites or History (Unless you have added folders etc)

Sep 02, 2014 | Apple iPad Tablets & eReaders

1 Answer

My Yahoo! mail has stopped working for about 7-10 days. I cannot open mail. Sometimes I get the message: stack overflow at line: 1 But usually there is no response. I see mail in the inbox, but cannot...


clear cached and cookies;
Start>control panel>internet options> under General TAB>click clear cache and cookies/clear history/delete browsing history
short cut: open Internet explorer>tools>internet option>under General TAB>click clear cache and cookies/clear history/delete browsing history
you can also reset your browser in to it's default functionality: Start>control panel>internet options> under Advance TAB>click reset Interner browser
shortcut: open Internet explorer>tools>internet option>under Advance TAB>click reset Interner browser

Aug 18, 2011 | Yahoo Mail

1 Answer

I have netgear wireless N-300 router. Linksys cable modem. Arius phone modem ( comcast trip play). Netgear not reconizing ethernet connection. My connection is yellow ethernet cable to linksys, grey...


If you mean phone modem on PC then no. Check connection between pc and router by acessing the webinterface (instuctions in linksys user manual).

If all OK there then contact your ISP.

Sep 03, 2010 | Computers & Internet

1 Answer

Can i connect usb and ethernet at same time with siemens 4200 ?


I did not know you could do it either, but I never tried. I can see an instant work around...make them both ethernet. You surely have more than one RJ46 connection in the modem/router. I figure you had the one closest to the modem was the USB and the one further away way the ethernet cable. So like I said, they probably supplied you with a short e cable so just plug that in. Assuming of course you have an eithernet adapter in the computer closest to the modem.
Try one thing first- plug them in the way you always did, unplug the modem for a minute and plug it back in and see if it detects them the way you had it set up...reboot each of the computers after that...if it is gonna work...this is the way.
Hope this helps Tim, please leave rating, thank you kindly

May 07, 2009 | Computers & Internet

1 Answer

Ethenet not reconized


Hi, If your son' s computer has a LAN port, then install the LAN driver. LAN port is different from modem. Modem is used for dial-up connection while LAN uses broadband or dsl connection. If you do not know where or how to find the LAN driver, post the manufacturer and model name of your LAN or the motherboard. You can also find it by right clicking the My Computer icon->Manage->Device Manager. On the right side, Expand the Network Adapter. You will then find the software that you are going to reinstall. Another thing is to try to update the driver if it works or not. Here are the steps :
  1. Right click My Computer icon.
  2. Click Manage
  3. A box will appear (Computer Management), Click Device Manager
  4. On the right side, Click and expand Network Adapters
  5. Right click the software, click update driver.
  6. Wait 'til it finds the necessary software.
  7. If it does, then your finished installing the Network Adapter driver. If it says it cannot find the necessary software, you have to manually install it.
  8. IF NOT yet installed, copy the Network Adapter software and paste it in google to find your Network Adapter installer.
I hope this fix your problem. Drop me a comment again if you encounter some problems, ok? I will assist you.

Jan 16, 2009 | Computers & Internet

1 Answer

I can't get online, my computer isn't reconizing it's eternet cord port


the reasons could be that the particular network connection has been disabled..go to my network places and right click on the connection and see if its disabled..another reason is that the ethernet driver is not installed..do check if both the lights at the ethenet port on your comp are flickering...

Oct 28, 2008 | Gateway Computers & Internet

1 Answer

Response to your e-mail...


Hi Nat1147,

Yes, if you are using wired networking to connect.

Good luck.

Jul 27, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73073 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...