Question about LG 50PX5D 50 in. Plasma HDTV

1 Answer

Input Problem Hi, My plasma TV suddenly lost some of the input channels. I use to see TV, AV1, AV2, Component1, Component2, RCB PC, HDMI1, HDMI2 but suddenly I put on the TV and now have TV, AV, Component1, Component2, RCB PC only. One AV and the 2 HDMI inputs have disappeared. Any suggestion. I wont mind if I can also get a software that I can use to connect to the TV from my laptop to work with the TV software. I have the same problem. I used to have a full input menu and now I see only TV, AV, Component1, Component2, RCB PC only. I can't selelct AV2.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Contributor
  • 29 Answers

Mine was the same, except i also could not access HD Components.
Unfortunately i had to get some one in, as the circuit board at the back of the tv was burnt out.You might have to get a technician in to service and replace the burnt circuit board.

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What channel do I put my LG TV on to connect my Sony blueray player to watch netflix


channel is not the correct path
you need to be thinking What input source do I need on the tv
atv dtv - THIS IS FOR AN ANTENNA CABLE
hdmi1 hdmi2 hdmi3 av1 av2 these are input sources
look on remote for input or source button .
HDMI 1

Apr 18, 2016 | LG 42LC2D 42 in. LCD HDTV

2 Answers

Is HDMI4 correct or HDMI1?


how many jacks do you have . I would think it will be 1 or 2

Feb 22, 2016 | Dynex Televison & Video

1 Answer

Problem: TV Menu w Auto & Manual Scan greyed out cannot be selected


Check the input selected. if it is other than tuner, this might happen. Change the input to tuner, and check.
http://electronicshelponline.blogspot.com/

Jan 11, 2016 | Televison & Video

1 Answer

I can hear the tv but no picture. All connections are in, still no picture and the sign says "No Signal"


Hi Karen,
Many a times one of the inputs fail due to various reasons. Please check the video input cable. If it does not work, please try another input ie. AV2 or HDMI1 or HDMI2. If that also does not work, the main board is defective.

Dec 06, 2015 | Televison & Video

1 Answer

Olevia 537-B11. Why is there a blue screen with a "no signal" message?


try main menu look for input should be Air (antenna) ,cable, av1, av2, hdmi1, hdmi2 and perhaps more. do an automatic channel scan if you have an antenna hooked up. will take several minutes scanning

Oct 09, 2015 | Televison & Video

1 Answer

Have a Panasonic TH-37PX60U tv - can I hook it up to a HD Satellite receiver - have a Bell hd but don't get any reception


Your plasma tv will display HD content when you connect an HD source (Blu Ray Disk, Sony PS3 / PS4 or Xbox 360, HD Cable Box, HD satellite, etc) via the TV's HDMI1, HDMI2, Component1, Component2 jacks or if you connect a UHF/VHF TV antenna (not cable box, etc.) to the "Ant" connector *and* you're close enough to a broadcaster with HD content to view.

Using any other input will produce only the lesser quality SD video signals. Review the manual - linked below - to help you connect the components you have.

http://service.us.panasonic.com/OPERMANPDF/TH37PX60U.PDF

May 13, 2015 | Panasonic TH-37PX60U 37 in. Plasma HDTV

1 Answer

How do I get the TV to show some sign that it is on


could you possibly maybe changed the input(source) selection to that of an unused device , If so most modern tvs will turn themselves off after a few minutes of receiving no input from a disconnected input , some common source selections that come to mind are ( AV1,AV2 , Hdmi1, hdmi2, DvD , and antenna) your tv might have different names but im sure it's got a source selection

May 07, 2015 | Televison & Video

1 Answer

Cannot find channels when i connect cable directly to tv


Make sure you have the correct input selected from the menu such as AV1 AV2 HDMI1 or 2 and so forth.

Aug 20, 2011 | Insignia NS-L26Q-10A 26 in. LCD TV

1 Answer

My p.s3 will not work on my 42 inch plasma t.v.i used to use an hdmi cable to watch it now im using a.v cords how do i reset or fix the settings it was on before?


Go to the main menu of your tv then try to select for the video input, you will see there the inputs tv or av1,av2, hdmi1,hdmi2 etc. try to choose the av1 or av2.

May 14, 2011 | Televison & Video

Not finding what you are looking for?
LG 50PX5D 50 in. Plasma HDTV Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71611 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18355 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...