Replacement battery for 5786 taylor scale

Contact Taylor Support direct. Tell them Andrew Taylor sent you (my real name) from Fixya. It needs to go back for repair.

https://www.taylorusa.com/pages/customer-service

..

If your Taylor 5798f scale won't turn on even with new batteries, there could be a few possible reasons for this issue. Here are some troubleshooting steps you can try:
1. Check the battery placement: Make sure the batteries are inserted correctly, with the positive and negative ends aligned properly.
2. Clean the battery contacts: Sometimes, dirt or residue can accumulate on the battery contacts, preventing proper electrical connection. Use a clean cloth or cotton swab dipped in rubbing alcohol to clean the battery contacts.
3. Reset the scale: Look for a reset button or a small hole on the underside of the scale. Use a paperclip or a similar tool to press and hold the reset button for a few seconds. This may help reset any internal settings that could be causing the issue.
4. Replace the batteries: Even though the batteries are new, they could be faulty or have low power. Try replacing them with a different set of new batteries to see if that resolves the issue.
5. Contact customer support: If none of the above steps work, it's best to reach out to Taylor customer support for further assistance. They may be able to provide specific troubleshooting steps or guide you on how to get the scale repaired or replaced if necessary.
Remember to refer to the user manual or contact Taylor customer support for specific instructions related to your model of scale.

Found in a 2012 FIXYA post for a Taylor 7558 but this may work for you too!

"...make sure the batteries are CR2032 and NOT CR2032E batteries. My Taylor 7901 scale finally works!" More on this later...

Taylor 7558 scale not working even with new batteries

More...

The e on CR2032e denotes the manufacturer as Mitsubishi. Both are CR2032 batteries which means they produce 3V and 210 mAh (210 is the spec, 220 is a common claimed total energy content).

https://www.quora.com/Whats-the-difference-between-CR2032-and-cr2032e

I dunno... I just calls em' as I sees em'

Anthony

Try to reset the electronics to factory defaults. If unsuccessful unit is fubar since repair not cost effective.

How do I replace the battery in my Taylor 7544BL Cal-max scale.
We removed the back and the lithium battery is positioned oppisite the opening?

The Taylor 7006 uses two CR2032 batteries.

take it to were you got it or instuctions show u

yes call the manufacutere or go to the store where you purchased it from and they can supply you with a the proper company and phone number

Anytime you have trouble with a Taylor scale - they have a lifetime replacement warranty. You need to call their 800 number and pay for 1 way shipping and they will send you a new one.