Question about HP LaserJet 4350 Printer

1 Answer

Printer error messsage

Hp deskjet prints older jobs and ignores current job. PC then gives "no memory" error message

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • HP Master
  • 629 Answers

Attempt to clear the print spool and set the its settings to print directly to the printer. Do a test print, then enable print spooling again. If the same thing happens, uninstall and reinstall the latest printer driver

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting an error of: 49.4Co2 on my HP color laserJet 5550hdn. Have tied turning it off; unplugging butno luck. the error message continues to appear


1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off and then back on.
3. Try printing a job from a different software application.
If the job prints, go back to the first application and try printing a different file. If the message appears only with a certain software application or print job, contact the software vendor for assistance.
4. If the message persists with different software applications and print jobs, disconnect all
cables to the printer that connect it to the network or PC.
5. Turn the printer off.
6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in slot J1.)
7. Remove all EIO devices from the printer.
8. Turn the printer on.
9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.
10. Replace a DIMM or EIO device if you determine that it causes the error.
11. Remember to reconnect all cables that connect the printer to the network or computer.
12. If the error persists, replace the firmware DIMM.
13. Replace the formatter and calibrate the printer.

Aug 29, 2011 | HP Color LaserJet 5550hdn Printer

1 Answer

HP 4350 ERROR MESSAGE: 49.2F90


"the printing operation has been aborted.
The issue can be caused by a firmware error, invalid print commands, corrupt data, invalid operations, poor quality parallel cables, poor connections or specific applications.

Action :

1> Press Cancel Job to clear the print job from the printer memory.
2> Turn the printer off and then on to clear the error message.
3> Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance.

If the above action does not solve the issue, contact HP or authorized service provider."

Mar 15, 2008 | Printers & Copiers

1 Answer

HP Color LaserJet 8550N control panel message "Out of memory job cleared." How do I free up, or clear the memory?


Power cycle the printer and reprint the job.
If error occurs again, install more memory in the printer.

Is it just one job that causes the error or is it everything that you print
How much memory is in your printer?

If you don't know, print a config page.

Feb 17, 2011 | HP Color LaserJet 8550n Printer

1 Answer

Our printer is not printing any attachements or documents. It is printing Greek gogleeegoop. Some error messages in the text including vertical align, margin, border etc.


Cancel all the queued printer-jobs.
Cancel the current printer-job.
Turn the printer off.
Disconnect the AC power from the printer.
Reconnect the AC power.
Turn the printer on.
Try a "test" print -- it should be OK.

Jul 20, 2010 | HP Deskjet 5440 InkJet Photo Printer

1 Answer

HP LaserJet 4700N has a service error code message of 49.FF05. What does it mean?


1 Press CANCEL JOB to clear the
print job from the printer memory.
2 Turn the printer off and then back
on.
3 Try printing a job from a different
software application. If the job
prints, go back to the first
application and try printing a
different file. If the message
appears only with a certain
software application or print job,
contact the software vendor for
assistance.
4 If the message persists with
different software applications
and print jobs, disconnect all
cables to the printer that connect
it to the network or PC.
5 Turn the printer off.
6 Remove all memory DIMMs or
third-party DIMMs from the
printer. (Do not remove the
firmware DIMM in slot J1.)
7 Remove all EIO devices from the
printer.
8 Turn the printer on.
9 If the error no longer exists, install
each DIMM and EIO device one (memory)
at a time, making sure to turn the
printer off and back on as you
install each device.
10 Replace a DIMM or EIO device if
you determine that it causes the
error.
11 Remember to reconnect all
cables that connect the printer to
the network or computer.
12 If the error persists, replace the
firmware DIMM.
13 Replace the formatter and
calibrate the printer. See
“Calibrate Now” on page

Jun 10, 2009 | HP LaserJet 4700 Printer

1 Answer

Blinking Light with no cartridge problems


I believe this is normal with HP deskjets. I have a different model but HP deskjet 3740, which also gives a blinking light when there is a pending print job and or printer has run out of paper. I usually get rid of this problem by putting some paper and most importantly removing and re-plugging the printer power cord (which does a basic power reset on the printer and causes a refresh of pending print jobs). I hope this works for you too.

Jan 27, 2009 | HP DeskJet D1460 InkJet Printer

1 Answer

HP 3650 gives incorrect error message


Normal 0 Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 09, 2009 | HP DeskJet 3650 InkJet Printer

1 Answer

Printing status frozen and won't delete or print


Have you tried unpluging your printer from the computer as well as unpluging the printer from the electrical? If that doesn't work you should start from scratch... that is remove the printer from the computer memory, delete it, turn off the computer, turn on the computer and go through the installation process as if you just purchased the printer. Barring any mechanical problems as in jams or the such, the printer should return to operational status.

Oct 07, 2008 | HP DeskJet 5150 InkJet Printer

1 Answer

HP 4350 ERROR MESSAGE: 49.2F90


he printing operation has been aborted.
The issue can be caused by a firmware error, invalid print commands, corrupt data, invalid operations, poor quality parallel cables, poor connections or specific applications.

Action :

1> Press Cancel Job to clear the print job from the printer memory.
2> Turn the printer off and then on to clear the error message.
3> Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job,.

Mar 15, 2008 | HP LaserJet 4350 Printer

2 Answers

Ram disk


Stangowner, In this case, the print job is too large for the available printer memory. Your choices are one of the following: Press to clear the message, cancel the current print job, and conduct the next print job, if any. · Press Cancel to cancel the current print job. · Press Menu to open the Stored Print and delete the current job. To avoid this error in the future, do the following: · Reduce the number of print pages such as splitting the print data. · Increase free memory space by deleting unnecessary data in the RAM disk. As for the RAM disk: When you send a job to the printer, you can specify in the driver that you want the printer to hold the job in memory. When you are ready to print the job, you must go to the printer and use the operator panel menus to identify which job in the memory you want to print. You can use this function to print a confidential job (Secure Print), or verify one copy before printing additional copies (Proof Print). NOTE: The printer holds the job until you delete it by using the operator panel or you turn off the printer. (This is the RAM disk) NOTE: Print and Hold functions require a minimum of 320 MB available printer memory. Also, you need to configure the RAM disk settings on either the OPERATOR PANEL OR THE PRINTER DRIVER. NOTE: Depending on the documents, its job may be too big for the available memory. In this case, an error occurs. Take this link and print it out. It will help you later when you get "other" error messages. http://support.dell.com/support/edocs/systems/3100cn/en/UG/section19.html And here's a link for more "operational" situations. http://support.dell.com/support/edocs/systems/3100cn/en/UG/section16.html#1087088 ZT3000 "Beta tester of "0"s and "1's"

Aug 21, 2007 | Dell 3100cn Laser Printer

Not finding what you are looking for?
HP LaserJet 4350 Printer Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...