Question about Linksys Wireless-G WRT54G Router

1 Answer

My linksys whireless-G WRT54G router does not powering up

When I put into electricity the only thing that is doing is theat  status led is linking all the time an nothing else is happening even when i type  the getaway address it doesant show nothing.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try pressing the reset button for 30+ seconds on the back of the unit while its on and then reset the unit and try typing in 192.182.1.1 into your web browser and see if you can access it that way. Would be better to be physically connected to the router itself while troubleshoooting. Hope this helped.

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgot password for router


You'll need to perform a "Factory Reset" on the (your Linksys) router. You do this by getting a paper-clip and put it through the very small hole, and slightly push & hold in place for 3 to 5 seconds. While doing so, you'll notice the LED's blink which is normal. Then, power OFF the router, power back ON, and your user-name & /password will be the smae: admin, admin. ... :o) Write it down siomewhere &/or, if you change it.

Feb 10, 2013 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys whireless 2.4ghz model wrt54g


WRT54G 5V 2A
WRT54G V1.1 12V 1A
WRT54G V2 12V 1A
WRT54G V2.2 12V 1A
WRT54G V3 12V 1A
WRT54G V3.1 12V 1A

Nov 11, 2009 | Computers & Internet

2 Answers

My wlan light keep going on and off on my wrt54g


Also check if the power light on your router is blinking. If it is blinking, that's an indication of hardware failure. To revive it, do a hard reset. Press and hold the power button of the router for 30 seconds then unplug the power. Wait for 30 seconds again before you plug it back in.

Oct 27, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Zyxel modem and wrt54g modem


You need to put the zyxel p600 into bridged mode

Mar 26, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Router WRT54G no Power led on


HAVE YOU PRESSED THE RESET BUTTON ON REAR OF ROUTER (LEFT SIDE).IF NOT TRY THAT OR FOR MORE INFO CONTACT TECH SUPPORT AThttp://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1149562300349&pagename=Linksys%2FCommon%2FVisitorWrapperRICHARDM69

Jan 03, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Can get ip address from PPoE Linksys Wireless-G WRT54G Router


If you receive that error message from the status page of the Linksys router, it only mean one thing the router shouldn't be set to PPPoE , the internet connection type of the router should be set to Automatic configuration/DHCP then do a power cycle on your modem and router...

Oct 25, 2008 | Computers & Internet

1 Answer

Problem with wired connection


if it is the power suplly issue you could pick up a replacement power cord at radio shack I had the same issue with mine only I was in a rush and picked up a adjustable power supply from radio shack and taped the power tip to the router with 3m electrical tape corrected problem no more power lose. good luck hope this helps

Sep 11, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Always getting ON DEMAND status


Linksys Wireless-G WRT54G Router

The Device they have including Manual Instruction?
- please read carefully on how to setup and configure the router.

- Try to setup and configure again your router

Please send me the full setup of your Linksys Wireless-G device...

Aug 31, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Wireless router not connecting


Be sure that your Modem plugs into the WAN port on the router.

1. Unplug your cable/dsl modem power
2. Unplug your Router power
3. Plug in your modem power ... wait for it to come completely up.
4. Plug in your WRT54G Router and wait for it to come up.

Press the reset button on the back of the router for 45 seconds while it is powered on. This will do a factory reset. Wait for it to come up. Then unplug it. Wait 30 seconds and plug it back in. Let it come all the way up.

Plug a PC into one of the switch ports on the router.
Now do an ipconfig /release and ipconfig /refresh in the command prompt of your PC to get an IP address from your Router.

Now you should be able to ping 192.168.0.1 and you should be able to get into the the configuration utility by putting http://192.168.0.1 in a browser. The username should be blank and the password will most likely be admin (all lower case).

Be sure to lock down your wireless SSID so neighbors and people passing by are unable to connect to your access point and do bad things on your network.

Jun 10, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...