Problem
Red lines or bands of red color (they can occur in green and blue as well) started showing up on my Sanyo Projector.
This could be due to one of the three filters that are easy to change - download the free pdf service manual - not the user manual - it is very descriptive and the filter is about $120 from Sanyo.
Hi there, Ive recently FGixed a PLV-Z3 was as chas said, Filters needed to be re-aligned.
Ive posted the schematics I used on my site.
http://www.entwan.netau.net/1_8_Repair-Schematics.html
Good luck
Sorry, The Url was wrong.. should be http://www.entwan.netau.net/1_2_Repair-s...
Ok, previous url's didnt work... Here is a working, FREE service manual for doanload.
http://yama.co.za/forum/index.php?topic=...
×
1,757 views
Usually answered in minutes!
I have a PLV-Z3 and the left half of the screen has a blue tint especially on lighter colors....I have tried cleaning the dust from the panels by using the bulb serenge but that did not work. I believe that the unit overheated at some point due to lack of cleaning the filter in a timely manner (doh!!). Is this also related to 3 filters.
×