Question about Car Equalizers & Crossovers

2 Answers

How do i wire an equalizer without any wiring diagrams

Got no idea which wires go were i need to know too>

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How do i hook up my equalizer color code info

Posted on Jul 15, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First - all equalisers are differently configured. At least try obtaining wire colours and its intended purpose. If there is no way of obtaining cable information, suggest seeing a car radio installation technician; there are ways to determine, but requires opening the unit/electronics understanding.

Posted on Jan 20, 2009

5 Suggested Answers

bugoy31
  • 1238 Answers

SOURCE: need wire diagram for learjet stereo graphic

can i know what exactly the brand and model of your stereo?

Posted on May 13, 2011

  • 1 Answer

SOURCE: how do i wire an equalizer without any wiring diagrams

1. bottom right( red wire 12 v dc on/off ignition switch)
2. top right( blue wire with inline fuse to amplifires)
3. bottom left( black wire ground)
4. top left( blue wire stereo remote wire)
I have a pdf photo diagram I made just e-mail me and ill send it to ya. hope this helps

Posted on Mar 25, 2009

latino
  • 93 Answers

SOURCE: how do i wire an equalizer without any wiring diagrams

do u have the model number

Posted on Nov 16, 2007

  • 1 Answer

SOURCE: Purchased an alpine 3011 graphic equalizer that

You are going to need the DIN plugs for the unit, on the back there are two imput jacks. The left jack is for the imput from your head unit, as far as I know, there is no other way for the EQ to accept imput except for the jack. The right one is for a digital time delay unit (rare). Coming out of the unit there are two output jacks, one is line out front, the other is line out rear. With these, there are also your power, ground, remote power, and speaker out puts. Good luck. I had one of these back in the 80's.

Posted on Jan 01, 2011

mail44jacque
  • 1 Answer

SOURCE: need wiring diagram for a Roadmaster EA400N 100 Watt Equalizer

Roadmaster EA400N


Wire Colors


Brown - Right Signal In

Gray - Right Out (-)

Pink - Right Rear Out

Dk Blue - Right Front Out


Green - Left Signal In

Yellow Left Rear Out

White - Left Out (-)

Orange - Left Front Out



Black - Common


Red 12VDC In

Posted on Sep 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need wiring diagram for a Roadmaster EA400N 100 Watt Equalizer


Roadmaster EA400N


Wire Colors


Brown - Right Signal In

Gray - Right Out (-)

Pink - Right Rear Out

Dk Blue - Right Front Out


Green - Left Signal In

Yellow Left Rear Out

White - Left Out (-)

Orange - Left Front Out



Black - Common


Red 12VDC In

May 26, 2012 | Car Equalizers & Crossovers

1 Answer

Wiring diagram for BOSS AVA 1209 equalizer. It was given to me dont know where the 4 wires connect red,black,white,last wire is orange or pink.


Your wiring is as follow's :

The Red wire is your (+) Positive that connect's to the power source
The Black wire is your (-) Negative that connect's to the ground
The Orange wire is your Auxillary (+) that turn's on Amplifier's or Power Ant.

You should have a Green wire, a Green wire with a White stripe,a Gray wire, and a Gray wire with White stripe

The Green wire is the LEFT channel input (+)
The Green/White wire is the LEFT channel input (-)
The Gray wire is the RIGHT channel input (+)
The Gray/White wire is the RIGHT channe (-)

(BE SURE THAT YOU CONNECT THE RED (+) AND BLACK(-) WIRES BEFORE YOU CONNECT THE ORANGE WIRE TO AN AUX SOURCE OR YOU WILL BLOW THE INTERNAL FUSE !!!)


PS. I have no idea where that White wire you mentioned goes.

Feb 03, 2011 | Boss AVA1209 7-Band Car Equalizer

1 Answer

Purchased an alpine 3011 graphic equalizer that has no wiring diagram...cannot hook it up without knowing what wires do what


You are going to need the DIN plugs for the unit, on the back there are two imput jacks. The left jack is for the imput from your head unit, as far as I know, there is no other way for the EQ to accept imput except for the jack. The right one is for a digital time delay unit (rare). Coming out of the unit there are two output jacks, one is line out front, the other is line out rear. With these, there are also your power, ground, remote power, and speaker out puts. Good luck. I had one of these back in the 80's.

Nov 13, 2010 | Alpine Car Equalizers & Crossovers

2 Answers

I have a 300 watt amp, but i just bought 12 gauge wire why wont it allow sound to come from my 12'' sub


There is no reason even if the wire was to small it would still allow ssound.make sure you have good connections.

Nov 08, 2009 | Pyramid 906 300 Watts (peak) 10 Band...

1 Answer

How to wire an eq to car stereo without an outboard amp?


no those wire is not for speakers out put that for signal in put only if there is rca jack follow the instruction and run your cable if your dont know dont guess you will burn unit audio out put if install wrong

Jun 28, 2009 | Power Acoustik PEQ-70 7-Band Car Equalizer

1 Answer

I understand the diagram with the +12v and the gnd wires, but does the third wire only work with other Kenwood products? It appears to be a "sense" wire or similar that feels the presence of a powered-up...


Hello davec99,

The third wire is commonly called a "remote" wire and is used to turn on other devices, such as an amp, connected to the audio system. When the equalizer is off, there's no signal on the wire. When the equalizer is on, a low current 12V signal is on the wire, signalling the remote device to turn-on.

Hope this helps.

Jun 12, 2009 | Kenwood KGC-4042A 5-Band Car Equalizer

5 Answers

How do i wire an equalizer without any wiring diagrams


1. bottom right( red wire 12 v dc on/off ignition switch)
2. top right( blue wire with inline fuse to amplifires)
3. bottom left( black wire ground)
4. top left( blue wire stereo remote wire)
I have a pdf photo diagram I made just e-mail me and ill send it to ya. hope this helps

Nov 15, 2007 | Car Equalizers & Crossovers

1 Answer

Wiring Diagram


Did you get this figured out?

Apr 28, 2007 | Hitron SEQ-554 7-Band Car Equalizer

Not finding what you are looking for?
Car Equalizers & Crossovers Logo

Related Topics:

2,170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Equalizers & Crossovers Experts

auxpower

Level 1 Expert

18 Answers

Chen Dorot
Chen Dorot

Level 2 Expert

132 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Equalizer and Crossover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...