- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I believe you're missing the power supply for the printer. The 3-prong power cord plugs in to the power supply. If you lost that part of the printer, I can only advise you to call Lexmark. They might be able to send you one.
SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray. Make sure that the product is turned off. Disconnect the USB cable from the back of the product. Disconnect the power cord from the product. Disconnect the power cord from the electrical outlet and wait 10 seconds. Reconnect the power cord directly into the electrical outlet and check for the following. Make sure that the power cord used is the one provided with the product. If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet. Make sure that the power cord is firmly connected to both the product and the power supply. Reconnect the power cord to the back of the product. Press the power button ( ) to turn on the product. Reconnect the USB cable to the back of the product. If the issue is resolved, proceed to Step six: Print a self-test page. If the issue continues, proceed to the next step.
your printer the g85 on the backyou will see below yhr bar codes where the power cord is four connections. looking at it from the back facing you on the far right is the power cord next to the power cord is the cord from the top lid second from the left i dont use this but i think it is the serial connection and far left connection is the usb cable the usb is the best on to use the two phone lines on what i call the leg or base far left remmber they need a special phone cord most cords only have two wires hooked up this on needs all four or it just want work right.hoop this helps