Question about Epson Stylus Pro 9600 InkJet Printer

2 Answers

9600 keeps telling me to RELOAD paper

I have a 44 inch wide roll of epson presentation matte paper loaded onto the spool. Each time i load the paper to the designated dot area i hit the pause button, the head slides halfway over and returns instructing me to reload the paper. I keep reloading the paper to no avail. Does anyone know how to correct this.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just flick the paper lever up and down. dont fiddle

Posted on Jan 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Yes, that seemed to do it. Thanks! I'm not sure what you mean by don't fiddle though.

Posted on Nov 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Epson pro large format 9600, I print on canvas, I have use Photo black since I have it, but never getting a saturation ressult. I have been counsil by Epson to use Matt black rather than Phot


"Photo black" is designed specifically for glossy photo paper. Matte black is for non-glossy paper, including plain paper. Matte black will print darker on non-glossy paper than photo black does.

Oct 28, 2014 | Epson Printers & Copiers

1 Answer

Error, paper out, when paper is loaded.


check there is the sensor cable is broken or the sensor is faulty.

Oct 12, 2014 | Epson WorkForce WF-2540 All-in-One Inkjet...

1 Answer

Loading roll paper for an Epson 7600


Remove paper, blow on the little window to the left of the bottom-right screw inside front cover...there's a sensor in there. I read this somewhere else, and it fixed my loading problems. Good luck!

Jan 08, 2013 | Epson Stylus Pro 7600 InkJet Printer

1 Answer

Paper not feeding for epson nx400


Check the following:


  • If paper doesn't feed, remove it from the sheet feeder. Reload it against the right side, behind the tab, then press in the tab on the edge guide and slide it against the paper. Make sure the paper is not above the arrow mark inside the edge guide.

  • If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it.

  • If the paper doesn't eject fully, you may have set the wrong paper size. Press the c:\users\home\appdata\local\temp\msohtmlclip1\01\clip_image001.gif Stop button, then open the scanner and remove the paper. Select the correct paper size when you reprint.

  • If it's wrinkled when it ejects, the paper may be damp or too thin. Load new paper.

  • Make sure you use new, smooth, high-quality paper, that is not curled, creased, old, or too thin. Make sure to load it printable side up.

  • Do not load paper with holes punched in it for insertion in a binder.

  • Make sure you load only up to the recommended number of sheets. If you're printing on both sides of the paper, try loading fewer sheets.


Paper type

Load up to
this many sheets

Plain paper

Approximately 120

Epson Bright White Paper
Epson Presentation Paper Matte

80

Epson Photo Paper Glossy
Epson Premium Photo Paper Glossy
Epson Ultra Premium Photo Paper Glossy
Epson Premium Photo Paper Semi-gloss

20

Epson Premium Presentation Paper Matte
Epson Premium Presentation Paper Matte Double-Sided
Epson Photo Quality Self-Adhesive Sheets
Epson Iron-On Cool Peel Transfer Paper

1


If the paper jams, do the following:

1. Gently pull any jammed paper out from the output tray or sheet feeder.

2. To eject the jammed paper, try turning the Epson Stylus NX400 off and then back on.

If that doesn't work and paper is stuck inside, turn off the Epson Stylus NX400. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus NX400 back on.

Aug 17, 2012 | Epson Stylus NX400 InkJet Printer

1 Answer

I have an Epson R1800 and when I load Roll 13X19 matte media and try to print I either get a "jammed media" message or the printer trys to print without feeding the media.


I had a similar problem trying to print epson pro canvas. I finally learned the "trick". First I generally cut an appropriately sized pice of canvas from the roll. Then I attach a HEADER. This is dome by cutting a piece of 13" wide photo paper in a three inch length (so you have a piece 13" x 3") . Draw a line at 1.5 inches and place some sort of adhesive (I use a double sided tape gun) on one side of the line. Line up the canvas/paper with the line and make sure it sticks to the header.

Now you should be able to manually feed the header/paper into the printer - once the header passes the correcct point the printer will "grab" it a position it correctly for printing.

Hope this helps

nickerjo,

leaningpalmstudio.com

Oct 26, 2009 | Epson Stylus Photo R1800 InkJet Printer

2 Answers

Reload Paper constantly shows up


This printer is very finicky about paper loading. I see this error most commonly when using auto-cut roll paper. If the paper edge is not cut perfectly straight, and it is not inserted into the printer perfectly strait, it will give you an error. When it does this, you can simply load the paper and press "cut" instead of "pause" when it says "press pause" and it will cut the paper straight. You can also set it to "Roll Paper Manual Cut" and load the paper, then set it back to "Roll Paper Auto Cut."

Jun 30, 2009 | Epson Stylus Pro 10000 InkJet Printer

1 Answer

Epson 10,000 won't print on posterboard


Prints on 44" Wide paper up to 1.5mm thick
Does this help at all?

May 29, 2009 | Epson Stylus Pro 10000 InkJet Printer

1 Answer

Printing Borderless at 42" width?


Set the roll size to 44 inch, set your left margin to 0 (in your preprint software), experiment. With margins set at 0, using Onyx Productionhouse 7.3, the 9800 will print approx 41.8 inch image on 42 inch roll 43.8 on 44, etc. This is considered borderless printing. No matter what size roll you tell the printer it has in it, it will print to about an eighth to a sixteenth of an inch short of the paper's actual edge (that's the left side of the roll paper coming out of the printer - the right side of the print). If you load, for example, a 36 inch roll, tell the printer its a 44 inch roll, and send a 40 inch wide print, with a left margin of 0 it will print around 35.8 inches, cutting off the image just before it would overprint and get ink on the machine (1/8 - 1/16inch before the edge of your 36 inch stock). It is possible that these tollerances will be different depending on what software you send your images with... hope this helps!

May 08, 2008 | Epson Stylus Pro 9800 InkJet Printer

1 Answer

Paper out indicator


I do know what's going either, but to get around this I have to keep paper in the loaded position. So turn the printer off, put a letter size sheet of paper in (as though getting ready to print), turn printer on again, and now the printer gives the "press pause" msg, press it, the paper will load up, and then the printer reads again, "Ready".

The printer just seems to want paper in it or else it won't read "Ready".

Nov 13, 2007 | Epson Stylus Pro 9600 InkJet Printer

Not finding what you are looking for?
Epson Stylus Pro 9600 InkJet Printer Logo

869 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...