Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset

1 Answer

WHEN I HIT THE TALK BUTTON, IT BEGINS WITH A SCRATCHY NOISE AND SOMETMES IT SQUEELS. I HAVE UNPLUGGED EVERYTHING FOR AN HOUR OR SO AND PLUGGED EVERYTHING BACK IN. THAN AS TOLD, I TRIED TO 'REREGISTER' BOTH CORDLESS HANDSETS. THE SAME PROBLEM PERSISTS. THE BATTERIES DON'T SEEM TO BE SPENT DESPITE THE YEARS OF USE. I HAVE ALSO CHECKED THE OUTSIDE 'NDET".

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I WAS TOLD THE PROBLEM WAS PROBABLY THE BATTERY. AS THE BATTERIES ARE THREE YEARS OLD AND CONTINUE TO POWER THE UNIT I CAN'T BELIEVE IT'S THAT. IT STATES THAT THE BATTERY SHOULD LAST ONE YEAR AND WOULD INDICATE "LOW BATTERY". THE PHONES ARE ALWAYS IN THE CRADLES AND POWERED UP. I TESTED THE OUTSIDE LINE AND FOUND NO NOISE. AS THE BATTERIES ARE $20 EACH, I BOUGHT A NEW PHONE FOR $10. SINCE THEN, I HAVE RE-CONNECTED THE OLD UNIDEN PHONES, BOTH IN MY HOME OFFICE AND IN MY BEDROOM AND THEY SEEM TO WORK JUST FINE WITH A MINIMUM OF NOISE. THIS ALL OCURRED AFTER SEVERE SNOW, WIND AND RAIN STORMS.
THANKS FOR YOUR RESPONSE.
TERRY ANDERSON

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My handset is display only searching, I cannot make or recieve calls & it is just flashing 88


when I press talk I get connectin9..handset out of range..searcgin9
when I press end I get Searching

Jan 30, 2013 | Uniden DECT 6.0 Cordless Phone

1 Answer

M7310 Non-Stop Dial Tone


Intercom button/s provide dial tone when they are pressed. They are required to call other phones on your system.
Sounds like your button is stuck or issue with the motherboard.

Dec 17, 2012 | NorStar Meridian M7310 Phone

1 Answer

The phone is charged and plugged in. But when I hit the talk button, It just flashes talk for a second then shuts off with no dial tone


clean contacts to allow the battery to charge. Cordless phone battery near dead. I took butter knife and scraped the 2 recharging strips so it could charge. After I did that my "red charging dot" stayed on and phone now works like new again. If this does not work then you may have to replace battery in phone. Mine I could buy online for around 10 bucks, but I am glad I didn't have to do that.

Apr 06, 2010 | Uniden Cordless Phone exai398i

4 Answers

What does parallel set on mean on a vtech phone


parallel i believe refers to the ability to use multiple handsets on one line and one call. This phone has the ability to isolate a telephone call so that only the original answering handset can tune into the conversation. If you only have one of these models then this setting has no real function.

Pls Rate This Post :D

Feb 11, 2010 | Vtech Digital Cordless Telephone VT-2568

2 Answers

No instruction manual


On the handset that is on the base is the one you need to use to set the time and date. It will also clear out the CL on answering machine.

On the handset without pushing talk hit the flash key. A message will appear on your phone and it says Answering machine. You can listen to all the options but to set time and date ---push the 8 button.
Set your time by using the phone keys such as it's 09:53 then look up in the right corner and use the + arrow key to set AM or PM. Then hit the # key. Then in the upper right corner it will say Mon---use the + arrow key to set the day. Then hit the # key. The message on your phone will say the day is and then the time is. Then hit flash. Then you can check your answering machine and see if that worked. This took me some time. I would not buy another phone like this again.

Mar 06, 2009 | GE 25952EE1 Cordless Phone

1 Answer

I have a,Amsrtad Emailer phone,problem,its displaying,hold down Emailer button restore services.WHY


ive just solved my problem and have restored my e mailer to full use. but have now discovered that my e mailer does not like Talk Talk ,for when i plugged my e mailer into my next door neighbours B T phone line it restored everything. however ive got another problem , my e mailer keeps randomly dialling for e mails and although it doesnt connect, im still getting billed for them on average about 200 a month so ive unplugged it from the phone line any advice?. bob

Jan 12, 2009 | Phones

2 Answers

My second handset is disfunctional


you have to put the second handset on the primary base for about 20 seconds for it to accept it, then you will get a tone and everything should work fine from there.

Nov 08, 2007 | GE 27831 Cordless Phone

2 Answers

Motorola 580 handset not working


My handset does not connect to the base station. It flashes momentarily, but does not find the base. The base station has a humming noise when the phone line is disconnected and the talk button is depressed. Hum is also present when the phone line is reconnected. The problem was resolved by replacing the 9VDC power supply. The hum disappeared and the handset immediately connected to the base.

Oct 31, 2007 | Motorola Mobility MA580 (612572111116)...

2 Answers

Cordless phones will not connect to base.


I just had the same problem and tried several things with no results. Then, I figured I had tried everything else so I just unplugged the battery pack, set the phone down for 25 minutes and then plugged the pack back in. Phone worked again after that.

Oct 09, 2006 | Sony SPP-S2730 Cordless Phone

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Telephone Expansion Handset Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96576 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...