Question about Washing Machines

1 Answer

CALYSPO WASHER DIGITAL DISPLAY+ALERT BEEP

DISPLAY STARTED BEEPING AND LIT UP ON 28 MINUTES.. I UNPLUGGED 2 X'S AND IT DOES IT AGAIN ALL ON IT'S OWN AND TOUCH PAD FOR WASH CYCLES DO NOT WORK... WHAT IS THE PROBLEM? AFTER PUSHING ALL THE WASH CYCLES THE WOOL SETTING RAN A CYCLE WENT OFF AND A FEW MINUTES LATER THE DISPLAY STARTED BEEPING AGAIN AND LIT UP ON 28 MINUTES. ANY ANSWERS???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

THe timer/ECU is failed. Replace it.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Constant beep no display


Try drying the board with a hair dryer but not so hot to destroy the electronics. Place an ample amount of distance between the board and the electronics. Set aside for an hour, then try the machine.

Jan 14, 2014 | Kenmore HE4t 3.8 Cu. Ft. King Size...

1 Answer

My front loading washing keeps coming up with f 13 code, what does this mean


Hello,

This means that the washer has detected a condition it needs to check. Press "Cancel" to clear the display and to stop the beeping sound, then try turning the washer off and on again. If you still see the "F," turn off the power to your washer and wait five minutes before turning it on again. If you hear the beep or see the "F" when you try to washing again, then it need to be troubleshoot.

thanks for using fixya.

Sep 06, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a fisher&paykel gwl11 washer and all it does is beep??? its unplugged rite now but as soon as i plug it up sure enough beep beep beep..... i had the papers for the troubleshooting codes but have...


Hi just read your posting.Now starting from the left to right which lights are lit when the machine is beeping.Is it the 2nd and 4th or the 1st and 7th ---etc---?Please reply with additional information and I am sure I can help you rectify this fault.Looking forward to your reply.

Oct 15, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Front load washer from frigidaire does not stay off! Its been blinking and beeping over and over. i press pause/cancel twice like it says on my manual but it just comes back on again. ...


LEave it unplugged forr some time recconnecct to reset with the pause/cancel buttons.
If the beep goes on again it can be due to failure of the beep driver, maybe the logic switch.
If all your washer functions are good except for this beeping, you can disconnect the buzzer unit by desodering it.
Other wise you must check for short in the driver transistor or the logic gate so as not to replace the board.

Sep 17, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

The machine was about to start the spin cycle when it started to beep and two lights came on. When I turn the power on and off at the switch it just starts beeping again and the only three lights are on.


Hi just read your posting.Now when the machine beeps a series of lights will light up.They will be in a row of 8 lights.Starting from the left to right which lights are lit when the machine is beeping.Is it the 2nd and 4th or the 1st and 7th ---etc---?Please reply with additional information and I am sure I can help you.Looking forward to your reply.

Sep 12, 2010 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

I have a Kenmore Elite washer, Model 110.20096993, it starts beeping with about 10 mins left in the cycle and shuts off. Any thoughts?


I have the same model - it displays 10 minutes and keeps beeping in series of 3 (beep beep beep...... beep beep beep... etc..) ran through a cycle successfully but kept beeping like that the whole time. I unplugged it for 10 minutes but had the same symptoms after plugging it back in. I unplugged it for 24 hours, and that seems to have cleared the problem up.

Jun 12, 2010 | Kenmore Washing Machines

1 Answer

Washer beeps at the end of each cycle,must be advanced manually


Hi Steve just read your posting.Now when it starts to beep a series of lights will light up.Starting from left to right they are numbered 1st on the left=128 next is=64 next is=32 next is =16 next is= 8 next is = 4 next is = 2 next is = 1. So the lights are numbered from left to right 128--64--32--16-- 8-- 4--2--1. now with this information look at the lights that are lit add up the value of the lit lights and reply back and i will look in my service manual and tell you what part or parts are faulty. hope this helps.

Jun 03, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

F-28 flashing. Door will not open


While the machine is on press "end of cycle" for 3 seconds, then wait for 2 minutes to try the door. Try this again if it does not open, this is the child lock program - to lock and unlock; it is the same procedure.

Check your washer plug to see if the connections are tightly screwed. You can also plug off for half an hour to reset.
How abt a nice rating for the free help? Thnks

May 19, 2010 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

GLW10US won't do anything but beep


well i don't have any experience with this brand but i would say you need to change the fill switch it senses how much water is in the tub shuts the water off then starts the washer its also called the pressure switch

Feb 16, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...