The divergence is messed up and it looks like I'm watching a 3D movie without glasses and its permanent

It looks like a Panasonic? not real bad but off, you might if have the original remote try to go into the menu for Convergence and see if the several crosses that can be called up will adjust---looks like red is offset some but might be adjustments
if the red or blue will not adjust enough or at all in some direction the two chips the set uses would have to be replaced, if its panasonic I have instructions for those---tell you everything you will need and how to do it--YOU will NEED a working Panasonic remote to see if set will adjust or not and after replacing the parts to adjust.

Let me know the model/brand and if you can solder or what? Soldering is involved if the chips are bad and need to be replaced.

18 pins on each chip Your video looks like the red is offset to the right on the left side of the screen. the chips may not need to be replaced if the convergence adjustment in the customer menu will move the red to the left in that area.