Question about PC Desktops

2 Answers

How to disable HP m7330n onboard video - PC Desktops

Posted by on

  • JDTec
    JDTec May 11, 2010

    usually you can not diable the onbord video. When you install a video board, all you have to do is plug the monitor into the new board.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 180 Answers

Pressing F2 (maybe F1) as it's booting up will access your BIOS screen. Here's a link so you'll be familiar with it beforehand.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07110&cc=us&lc=en&dlc=en&product=1818272
You'll want the Advanced tab and Primary Video Adapter.
Let me know if you have any questions. Feel free to rate me accordingly. It helps me out. Thanks.

Posted on Jan 16, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 238 Answers

If that's so, use Graphics card for that matter. It will automatically read/use the graphics card and not your onboard video. Just look on your motherboard if what type of graphics card will you use for your graphics card slot in the motherboard. Whether it is AGP, PCI/PCI Express.

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install new video card in Gateway GM5072 with Pheonix bios and disable oonboard video


There should be an option to disable the onboard VGA connection within the BIOS of the computer.
Plug your monitor into the onboard video output to do this.

Dec 24, 2011 | Gateway GT5220 PC Desktop

1 Answer

Hi, excuse my poor english. How can I disable onboard video on a Lenovo M55e 9632AE2? Thanks in advance. Markus Brandl


There are two ways to disable the onboard video:

First Option:
When the machine boots up, watch for instructions such as "Press to enter setup, bios, configuration, ect." Within the BIOS setup should be an option to disable to onboard video. This can usually be found within an Integrated Chipset Features section or a Video section depending on your BIOS. Be careful though, messing with settings that you don't understand can affect your computer negatively.

Second Option:
Assuming you're disabling the onboard video because you have installed a video card, access the device manager by right-clicking "My Computer" and click Manage. Select the Device Manager on the navigation pane on the left, then expand the Display Adapters section. Right-click on your onboard graphics adapter and then click Disable and you're done!

May 25, 2011 | Lenovo ThinkCentre M55e 9632 PC Desktop

1 Answer

Problem with onboard video of a compaq sr2032x


The onboard video card is actually set to secondary when you plug in a PCI or PCI-E video card. If no video image is showing then there may be further damage inside the mother board.

Apr 29, 2010 | HP Compaq Presario SR2032X PC Desktop

1 Answer

What is a good video card to use in a Compaq Presario SE1110NX? The onboard video will not handle newer graphics.


If you need just an basic card for video then any card with over 64Mb will do.
if you need something for gaming or high graphics then go with something over 128-256MB.
Of course if you are going with something that demands more video memory...once you get the card of your choice installed then disable the onboard video to give memory back to the computer.
Go into BIOS (Setup menu from bootup) and disable onboard video.
I would also add more memory to the computer...max it out if you can ...especially if you will be doing games.

Nov 04, 2009 | HP Compaq Presario SR1110NX PC Desktop

1 Answer

My HP Media Center m7330n won't power up... The fan comes on but will not boot.. The LED power light blinks at 3 second intervals from blue to yellow/orange.. What is the diagnosis...


You have to check with your RAM sir, if you know to remove the side cover of your CPU(tower) there will be a green colored chip fixed in vertical position in the motherboard if remove it and then fix it properly means you will get the display in yur screen.i will show you the RAM picture2f70f69.jpg

Oct 29, 2009 | HP Pavilion Media Center TV m7330n...

1 Answer

I have hp pavilion slimline computer. Loosing a


If you are sure that the monitor and cable are fine, then it is possible that the onboard video can be going bad. If you can regain the color while "jiggling" the cable at the connector to the computer and you are 100% certain the cable is bad, then this can indicate a loose connection of the plug to the mainboard. This is often caused by what is called a cold solder spot, where it has not adhered to the metals and thus causes a loose connection. If this is not the issue, then it is safe to say that perhaps the onboard video is going bad... assuming it is an onboard video since the unit is a slimline. If space permits, you can always add a video card and disable the onboard video.

Sep 26, 2009 | PC Desktops

1 Answer

Media Center has an Intel graphics chip on the mother board. How do I omit using it so I can install a PCI video card?


Have you tried adding the card and see if it defaults to the card rather than the onboard video? Many BIOS are set that way by default.

Go into your BIOS and look at the onboard devices. It is preferable to tell your BIOS to first look for an add-in card and default back to onboard if you don't find one. But you can disable your onboard video, then save and reboot.

Jul 18, 2009 | HP Media Center m7060n PC Desktop

1 Answer

Presario SR1103WM video dead


okay, if you go into bios, try to find where the video source is from or disable it from advanced to components to onboard, select disable

Jan 06, 2009 | HP Compaq Presario SR1720NX (EL435AA) PC...

1 Answer

How to disable onboard video on DC7600?


hello, sometimes if you disable on board VGA on your baord, the vga card will still not work well but i will tell you how to disable ooboard vga on your sytem anyway( got to the bios settings on your computer, select pheripheral setup and disable onboard vga.)

Dec 17, 2008 | HP Compaq dc7600 PC Desktop

1 Answer

Hp compaq dc5000 small form factor


Hi, uninstalling the onboard video will only be reinstalled by Windows next time you boot up. Disabling it in the Device Manager might and mght not do the trick if your mb is set on using the onboard. You might want to try and disable the onboard video in the CMOS/BIOS set-up. In some instances, you are asked in the BIOS what video will be used such as onboard, AGP or PCI or a selection of something like that. Also you can try and not allocating any memory to the onboard video. Hope this be of some help. Pls post again how things turn up. Good luck.

Apr 28, 2007 | HP Compaq dc5000 PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...