Question about Sony VAIO PCV-RX753 PC Desktop

1 Answer

My sony vio is not starting up

It is making long beeping sounds and not is coming up on the screen

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 72 Answers

Hi there, This my indicate quite a few hardware issues but to start,
If you have an expansion card requires its own molex connection to the power supply this may be the problem if the card isn't getting enough power or is unplugged. check and make sure all power cords are plugged in and not coming loose on the mobo and all other components, If you have access to another Power supply try swapping your power supply for a different one. i hope this helps and good luck.

Posted on Jan 16, 2009

2 Suggested Answers

cpenzes
  • 1102 Answers

SOURCE: imy sony vio desktop is

have you installed anything new
like memory

Posted on Jan 16, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start up


hi , Reuben

I would suggest you try safe mode.
Safe mode is a troubleshooting option for Windows that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. The words "Safe Mode" appear in the corners of the display to identify which Windows mode you are using. If an existing problem does not reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes.
If you don't know the cause of the problem, you can use the process of elimination to help you find the problem. Try starting all of the programs you commonly use, including the programs in your Startup folder, one by one, to see if a program might be the cause of the problem.
Follow the steps to boot the computer in safe mode with networking:
1. Restart your computer if it is powered on.
2. Tap the F8 key after your computer initially powers on.
3. Once you see the Advanced Boot Options menu you can stop tapping.
4. Use the up/down arrow keys to highlight your selection.
5. Select Safe Mode with Networking and press Enter.
6. You should see drivers loading, and then please wait.
7. You should then be at the Welcome Screen.
8. Logon to your computer using an account with Administrator privileges.

May 27, 2015 | Computers & Internet

1 Answer

My SONY VGN-N 130 G Screen Shows sony logo and freeze can not go to home page or any functions ?


Try boot it up by pressing F12 and enter secure mode. Then you shoose "repair". Petter

Oct 17, 2014 | Computers & Internet

1 Answer

Screeen is upside down


If you have a Windows OS, press and hold the ALT and CTRL (control) keys and then press the Up arrow. (If that doesn't work, try holding the Alt and CTRL keys and pressing the left (or right) arrow key twice.) If that fails, right click on the desktop (Windows+D will minimize all programs), anywhere with no running programs or icons. Then select the Screen Resolution option. Look for the line Orientation; use the drop down menu to select the correct orientation. Click Apply and then confirm the setting change if a confirmation window pops up. (This works in Windows 7 and 8.) For older Windows versions on laptops, you may need to select Graphics Properties (or a similar line) and then repeat this. The Windows screen rotation option is dependent on your video card. With some models, you'll need to open the graphics card properties to undo the rotation. You should see a line for the graphics adapter when you right click on the Display.

For Macintosh OS, make sure that the System Preferences is closed. Then open it by pressing Option/alt + CMD . Select the line Display. Find the button labeled Rotation: Standard then choose the correct screen orientation.

I hope this helps.

Cindy Wells

Jun 01, 2014 | Computers & Internet

3 Answers

Bluetooth & sound


Generally, connecting phones via bluetooth to a laptop just allows for file transfer between the two devices. It is not to input sound from the phone through the speakers of the laptop. You would need a bluetooth audio device for that such as bluetooth speakers or headphones

Jan 28, 2014 | Dell Vostro Computers & Internet

1 Answer

Don't start up


check that all removable media is removed from computer, flash drives etc,if this message still appears the reinstall your os, there are several reasons for this error. You may have to replace your hard drive if that is the issue- you would know because after reinstall (if it makes it thru it) it will only crash again, this is much too big of a subject to sum it all up here and now, good luck... more questions just ask

Mar 30, 2013 | Computers & Internet

1 Answer

Hitman pro kickstart aborts due to no internet connection


After the kickstart screen comes up,
click on the settings tab, then on the advanced tab, go down to the early
warning scoring section, check on the "I am an expert......." and then check the
"set the defalt mode to early warning scoring" then click on the ok at the
bottom. Hope this helps someone

Feb 11, 2013 | Computers & Internet

1 Answer

How do i reset my computer to an earlier date?


Most computers have a RTC or "real time clock" in the BIOS. BIOS (or "Basic Input Output System") controls how data gets into and out from the processor (via keyboard, disk, etc.). Be careful making changes. The BIOS is normally only accessable when the computer is powered on or reset, and then only while performing the POST (or "Power On Self Test"). At this time your screen may display text describing memory, drives, controllers, etc. Some machine have a "silent boot" enabled which displays a manufacturer's graphic or logo instead of this data. It is during this time the the BIOS may be accessed. Depending on the manufacturer of your computer, a key (Delete, Escape, F1 or some other) or key combination (ALT + F1, ALT + S, or some other) will be needed. It is required to press the key or key combination prior to the Operating System loading message(s). This can be done be repeatedly pressing the key (or key combination) once every second (or two) during the POST. Holding the key(s) down the entire time - or pressing them too often will result in an error, and require starting over again.

Once the BIOS screen is presented, you will have to scroll the entire page(s) to find the clock. Most BIOS brands have more than just a single page of settings. Using the the up, down, left, right, PgUp, PgDn & Enter keys - navigate to the clock hours and minutes and adjust as needed. Make sure that you SAVE changes before exiting the BIOS screen. Upon exit, the computer will reboot with your settings.

Your Operating System may also provide a way for you to change the system time (and date) as well. Try clicking on the time / date to see if it will bring up a dialog box that allows you to make the change.

I hope this helps and good luck! If my answer was helpful, please rate it "4 thumbs up" Thanks!

Jul 27, 2011 | Computers & Internet

1 Answer

After turn on my computer I have only three short beep.


Open the cpu cabinet cover.Then reconnect the RAM memory into motherboard. Make sure motherboard is not ground with cabinet cover. Clean dust from motherboard .If there is any pci or vga card reconnect it. Also pull cmos cell from motherboard for 10 minutes then all settings defaults then check. Let me know if you need further assistance. Thanks for using FixYA.

Feb 03, 2011 | Computers & Internet

3 Answers

How do I start bluetooth on the qosmio g25-av13?


Try the ff:

1. Are you also using a wireless internet? If you are and you cannot also connect on wireless, make sure that the wireless is enabled on your laptop. On the left side of the laptop there is a on/off switch push the switch to on. (beside the usb port).

2. if it is already on, make sure that the bluetooth is enabled also, you can check it on control panel, system, hardware, device manager, bluetooth, right click on bluetooth driver, if you see enable bluetooth click on it, if you see"disable bluetooth" that means it is already enabled.

3. If the above is already configured, lastly, look for the bluetooth icon (bluetooth manager) on the lower part of the screen on the taskbar/tray if you see the bluetooth icon, right-click on it then click "Enable Bluetooth Radio". Now, if there is no bluetooth icon on the tray at the lower right of the screen, go to Start, Toshiba, Bluetooth, Bluetooth Settings, inside the Bluetooth SEttings, click on Bluetooth, Options, CLick on Enable Bluetooth Power, also, inside the Tray Icon (still inside Bluetooth Settings) select an icon so you can always see the status of your bluetooth on the Tray and you don;t need to do and check everything everytime you cannot connect via Bluetooth.

Hope this helps.

Tricia

Aug 19, 2008 | Toshiba Qosmio G25-AV513 Notebook

Not finding what you are looking for?
Sony VAIO PCV-RX753 PC Desktop Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...